Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Objetivos Específicos:
Descripción Cantidad
Osciloscopio 1
Generador de funciones 1
Multímetro 1
Sondas. 2
Resistencias 2
condensadores 2 Fig2. Circuito RC derivador
Protoboard 1
Cuando se aplica un tren de impulsos a la entrada de este
circuito, se eleva de repente de cero al máximo y después
se empieza a descargar de forma exponencial hasta llegar IV. DESARROLLO DE LA PRÁCTICA
a cero esto nos dice que el condensador se descargo y
empezara de nuevo a cargarse y así repetitivamente. CIRCUITO DERIVADOR
Practica
𝝉
Para una frecuencia de 10KHz y = 𝟓𝝉
𝟐
τ
f = 10KHz para = 5τ
2
𝐶 = 10𝑛𝐹
5τ = 0.00005
τ = 0.00001
RC = 0.00001
R = 1K Ohmio
1 1
𝜏= = = 100𝑢𝑠
𝑓 10𝑘ℎ𝑧
Simulación
Practica
Simulación
Circuito Integrador
𝝉
Para una frecuencia de 100KHz y < 5𝜏
𝟐
𝝉
Para una frecuencia de 1KHz y > 5𝜏
𝟐
τ
f = 1KHz para > 5𝜏
2
𝐶 = 10𝑛𝐹 𝝉
5τ < 0.0005 Para una frecuencia de 10KHz y = 𝟓𝝉
𝟐
τ < 0.0001 τ
RC < 0.0001 f = 10KHz para = 5τ
R < 10𝑘 Ohmios 2
𝐶 = 10𝑛𝐹
R = 1K Ohmio
5τ = 0.00005
1 1
𝜏= = = 1𝑚𝑠 τ = 0.00001
𝑓 1𝑘ℎ𝑧 RC = 0.00001
R = 1K Ohmio
1 1
Practica 𝜏= = = 1𝑢𝑠
𝑓 10𝑘ℎ𝑧
Practica
Simulación
Simulación
𝝉
Para una frecuencia de 100KHz y < 5𝜏 Frecuencia Vipp Vspp Vmax VR
𝟐
1Khz 4v 4.80v 2.24v 3.92v
τ 10Khz 4v 4.88v 2.40v 5.12v
f = 100KHz para > 5𝜏
2 100Khz 4v 2.36v 1.12v 6.32v
𝐶 = 10𝑛𝐹
5τ > 0.000005
τ > 0.000001 V. CONCLUSIÓN
RC > 0.000001
R > 100 𝑂ℎ𝑚𝑖𝑜𝑠 CONCLUSIÓN
R = 1K Ohmio
1 1 Podemos concluir que una vez acabada la práctica hemos visto
𝜏= = = 1𝑛𝑠 los diferentes tipos de ondas en la salida de los circuitos, ya
𝑓 100𝑘ℎ𝑧 sea derivador como integrador. Entre estos dos circuitos existe
una diferencia la misma que se ve en las gráficas de las
Practica simulaciones y las imágenes del osciloscopio donde vemos
que en los integradores existe una forma de onda diferente, a
la de los derivadores en los integradores se ve una onda de
carga del condensador que dependiendo de si el periodo es
menor, mayor o igual a cinco taos se cargará de una manera
incompleta, justa y rápida respectivamente.
Para los circuitos derivadores lo contrario de los
anteriormente mencionados representa la descarga del
condensador que funciona de la misma forma de los
integradores, pero en estos existe un pico de voltaje mayor al
de ingreso que es propiamente de la función cuadrada que se
Simulación le aplica a el circuito.
Conclusion
We can conclude that once the practice is over we have seen
the different types of waves at the output of the circuits, either
as a bypass or as an integrator. Between these two circuits
there is a difference that is seen in the graphs of the
simulations and the images of the oscilloscope where we see
that in the integrators there is a different waveform, that of the
shunts in the integrators a load wave is seen of the capacitor
that depending on if the period is less, greater or equal to five
tao will be charged in an incomplete, fair and fast way
respectively.
For the derivative circuits the opposite of the previously
mentioned represents the discharge of the capacitor that works
in the same way as the integrators, but in these there is a
voltage peak higher than the input that is properly of the
square function that is applied to the circuit.
VI. REFERENCIAS
[2] a100ciacierta.com/2011/03/20/el-gen-impulsivo