Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1
Setup functions
Entering the advanced setup press and hold the setup and Return buttons at the same
time. Changing the level press Setup button shortly
ON MMA antifreeze is ON
MMA Antifreeze * A4
OFF MMA antifreeze is OFF
* Setting is always on ** Adjustable also by the Quick Setup *** Requires VRD card
2
Setup functions
ON Automatic detection is ON
Remote controller automatic
A21
detection * OFF Automatic detection is OFF
* Setting is always on ** Adjustable also by the Quick Setup ***Depends on panel software version
3
Setup functions
20 Factory setting 20 A
Contact ignition current * B1
10- Adjustment range 10…40 A
40
0,5 Factory setting 0,5 s.
4
Setup functions
0 Factory setting
5
Setup functions
6
Setup functions
60 Factory setting 60 Hz
AC frequency ** E1
50…250 Adjustment range 50…250 Hz
5 Factory setting 5 A
Half cycle AC E3
5…20 Adjustment range 5…20 A
50 Factory setting 50 %
Positive ignition current * E6 30…150 Adjustment range 30…150 % (Limited by the
max. of the power source)
10 Factory setting 10 = 0,01 s
Positive ignition sequence time * E7 0…50 Adjustment range 0…50 = 0,0…0,05 s
* Setting is always on ** Adjustable also by the Quick Setup *** Note panel software version
7
Setup functions
50 Factory setting 50 %
MIX TIG AC pulse ratio ** E10
10… Adjustment range 10…90 %
90
100 Factory setting 100 %
MIX TIG DC level ** E11 50… Adjustment range 50…150 %
150
10 Factory setting 10 ms.
Spotwelding time * E12 1…2 Adjustment range 1…200 ms.
00
50 Factory setting 50 ms.
MicroTack Pause Time E13 50- Adjustment range 50…500 ms.
500
1 Factory setting one pulse
MicroTack AC Pulse Count E14
1-5 Adjustment range 1…5
8
Notes