Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Item Details
1 Manufacturer: Name and address of original manufacturer: Name and address of Trade Agent required on
This should be the name of the certificates:
company that the original certificate is
held with.
3 Equipment description:
* The use of this certificate number is governed by the relevant sections of the Regulations Applicable to the Holders
of SCS certificates. It has been allocated prior to the issue of the actual certificate and, until the issue of this
certificate, the number or its suffixes may be subject to change and therefore it is for information purposes only. If
this certificate number is used for reasons such as, pre-production planning or label development, then this is
undertaken at the risk of the client. It is specifically prohibited to use the certification marks (certificate number, CSA
Group-Sira logo, UKAS logo, standards marking etc.) on products that are placed on the market or put into service,
prior the issue of the actual signed certificate.
A declaration from the original manufacturer that the products to be supplied to the trade agent will be the
same as that already certified.
A declaration from the trade agent that the products to be put on the market will be identical to that already
certified and supplied and will not be modified in any form.
A declaration from the trade agent that they agree to comply with the Regulations Applicable to the Holders of
CSA Group-Sira Certificates
A label drawing for the trade agent that shows the same information as on the label of original certified product,
except for the certificate number, the product reference (if different), and the ATEX trade agent’s name and
address.
An extract or copy of the product instructions that comply with ATEX Directive, Annex II, Clause 1.0.6 the will be
supplied by the trade agent.
Please note that the price quoted covers the issue of certificates only and does not include for any audit work
required. This will be quoted for separately upon application.
All work is undertaken in accordance with CSA Group standard terms and conditions.
All manufacturers and trade agents are required to comply with the production control requirements defined in
article 8 of the ATEX Directive and the IECEx scheme.
In addition to holding an EC type-examination certificate and/or Certificate of Conformity in his own name, the trade
agent is also responsible for engaging a notified body to approve and carry out surveillance of the trade agent’s
The trade agent will need to satisfy CSA Group that it is in control of production by maintaining a Product/Production
Quality Assurance Notification of appropriate scope for the product(s) concerned.
An application to CSA Group by a prospective trade agent for a Product/Production Quality Assurance Notification
will require an audit at the trade agent’s premises.