Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hydra-Jar AP Accelerator AP
1
Hydra-Jar® AP Accelerator AP
The Hydra-Jar AP frees stuck drill use of a unique detent system. • Safety clamp lets jar make- Used in conjunction with the Features and Benefits • Protects the drillstring and
stem components during drilling This provides more consistent up, rack and handle like a drill Hydra-Jar® AP, the Accelerator • Fluid compression inside surface equipment from
or workover operations by jarring loading and firing of the jar over a pipe joint, reducing trip time AP combines the advantages the tool compensates for damaging shock waves
both up and down with an impact broad range of wellbore tempera- • Temperature rated to 500°F of up-or-down or up-and-down limited drill pipe stretch • Temperature rated to
force controllable by the driller. tures. These features, combined • Seals are rated to 20,000 psi motion with hydraulic fluid for in shallow wells, provid- 500°F
The jar’s detent system utilizes with careful materials selection • Circulation rated to 10,000 maximum jarring impact. This ing stored energy to create • Seals are rated to 20,000
a unique temperature compen- and field-proven engineering, de- psi harder-hitting advantage pro- maximum impact psi
sation process to provide consis- liver a uniquely rugged, reliable • Optional Safety-Lok feature vides as much as two times • Full bore design minimizes • Circulation rated to 10,000
tent impact, blow after blow, and downhole impact system. prevents the jar from firing the impact provided by com- pressure losses and pro- psi
high temperature seals make the accidentally petitors’ tools. When used in vides wireline tool compat- • Optimizes jar performance
Hydra-Jar AP the best choice for Features and Benefits • Provides up, down or up-and- conjunction with the Hydra-Jar ibility in extended reach direc-
hostile drilling conditions. The • Unique metering process down impact without torquing AP, the Accelerator AP replaces • Creates up to twice as much tional and horizontal wells
Hydra-Jar AP gives the driller total compensates for the decrease or tripping for adjustments or supplements pipe stretch. impact force for jarring up, where the stored energy in
control of direction (up or down), in detent cylinder oil viscosity • Performs in every drilling en- Therefore, in shallow or crooked down, or up and down the drill pipe is lost due to
force of impact, and frequency of as the jar is fired repeatedly, vironment; land or offshore, holes the fish is hit hard, re- • Operates automatically with hole drag
impact, while offering unmatched ensuring consistent impact vertical or deviated wells, gardless of depth. In addition, the jar, increasing reliability • The Accelerator AP Tool is
durability and reliability. • Jarring direction, duration and ultra-deep or ultra-hot well- this Accelerator AP provides the and ease of use recommended whenever a
impact intensity are controlled bores same hit with less overpull at • Efficient design ensures full drilling jar is placed in the
The Hydra-Jar AP is balanced from the rig floor • Expands options for drilling, the jar. The hammer mass re- overpull force is delivered string
to hydrostatic pressure through • Full bore design minimizes coring, cementing, testing, ceives 100 percent transfer of to the hammer section,
ports open to the wellbore, ensur- pressure losses and provides fishing, workover and reme- the overpull. creating maximum positive
ing consistent hitting performance wireline tool compatibility dial operations impact
regardless of changes in downhole • Jar may be run in compres- • Tools make-up and rack like
pressure. The tool is also temper- sion or tension, providing standard length drill pipe
ature-compensated through the optimized placement in the
string
Specifications
Tool OD (in.) 3⅜ 4¼ 4¾ 6¼ 6¼ 6½
Tool ID (in.) 1½ 2 2¼ 2¾ 2¾ 2¾
Tool Joint Connection 2 ⅜ API IF 2 ⅞ API IF 4 ½ API IF 4 ½ XH 4 ½ XH 4 ½ API IF
Jar-Pact® Program
Assembly Number 16577 15360 16790 16893 17096 16293
Overall Extended Length (ft., in.) 24' 5" 29' 10" 29' 10" 31' 2" 31' 2" 31' 2"
Max. Detent Working Load (lbf.) 44,000 70,000 95,000 150,000 150,000 175,000
Tensile Yield Strength (lbf.) 236,000 377,870 492,280 730,320 964,200 900,000 This proprietary software allows Smith Services Jar-Pact Impact and Placement
Torsional Yield Strength (lbf/ft.) 6,480 15,830 19,120 40,500 50,750 54,790 engineers to model the placement and perfor- Analysis Software
Free Stroke - Up (in.) 7 8 8 8 8 8
mance of the AP Impact System to ensure that
the Hydra-Jar AP and the Accelerator AP will pro-
Free Stroke - Down (in.) 7 7 7 7 7 7
vide superior real-world performance in the cus-
Total Stroke (in.) 21 25 25 25 25 25 tomer’s specific application. Using information
Tool Weight (lb.) 500 800 1,050 1,600 1,600 1,850 from the operator’s well plan, including wellbore
and BHA parameters, the program recommends
Specifications (continued)
the optimum placement for the tools.
Tool OD (in.) 7 7¼ 7¾ 8 8¼ 8½ 9½
Tool ID (in.) 2¾ 2¾ 3 3 3 3 3 Smith engineers are able to combine the well
Tool Joint Connection 5 H90 5 ½ H90 6 ⅝ API REG. 6 ⅝ API REG. 6 ⅝ API REG. 6 ⅝ API REG 7 ⅝ API REG. information provided by the customer with the
Hydra-Jar AP and Accelerator AP data and re-
Assembly Number 16300 16334 16255 16257 16259 16316 16250
ceive recommendations from the software on
Overall Extended Length (ft., in.) 31' 6" 31' 6" 32' 32' 32' 32' 32' 6" the optimal placement of the tools. This is a
Max. Detent Working Load (lbf.) 230,000 240,000 260,000 300,000 350,000 350,000 500,000 critical requirement in order to avoid locating
Tensile Yield Strength (lbf.) 1,179,930 1,261,160 1,315,220 1,621,560 1,819,380 1,846,260 1,654,170 the tools in or near the drillstrings neutral point
Torsional Yield Strength (lbf/ft.) 67,390 84,150 86,840 98,490 115,418 115,418 152,800 or transition zones. The Jar-Pact also ensures
that the ratio of the hole size to the size of the
Free Stroke - Up (in.) 8 8 8 8 8 8 8
Hydra Jar AP and the Accelerator AP is within
Free Stroke - Down (in.) 8 8 7 7 8 8 8 recommended guidelines.
Total Stroke (in.) 25 25 25 25 25 25 25
Hydra-Jar
Tool Weight (lb.) 2,600 3,000 3,200 3,550 4,000 4,500 5,600 AP Accelerator AP
2 3
Data Acquisition Program Hydra-TT® Double-Acting Hydraulic Jar
The Data Acquisition Program ensures that The Hydra-TT Double-Acting Hydraulic Jar is a slimhole impact tool designed using the same principles
all Hydra-Jar® AP tools are tested to specifi- as the Hydra-Jar tool and is used to free equipment stuck downhole. The tool’s small diameter makes
cation prior to being sent to a wellsite. The it ideal for use in coiled tubing operations, snubbing, small diameter rotary drilling and fishing applica-
system uses two pressure transducers to tions. Since the Hydra-TT Jar is capable of torque transmission, it can be used with a downhole motor.
perform both a push and a pull test for both The standard tool comes equipped with premium seals for use in both high temperature and high pres-
short and full detent. A laser rangefinder sure wells. The Hydra-TT Jar’s robust design, materials quality and comprehensive quality requirements
device is used to measure stroke length. ensure reliable performance in the harshest of downhole conditions.
The results, which include the test readings,
tool serial number, date and time, are cap- Features and Benefits
tured in a reference database. The infor- • Jarring force delivered on up and down strokes
mation may be viewed as raw data or in a • Temperature compensated detent system enables prolonged jarring when required
graphical format. • Large bore accommodates drop balls and flow release equipment below the tool
• Maximum stroke length increases impact force, improving tool effectiveness
Features and Benefits • Temperature rated to 500°F
• Records push/pull, time and stroke • Seals rated to 20,000 psi differential
length test data • Circulation rated to 10,000 psi
• Displays real time graph and timer
• Generates electronic tool test report Applications
• Archives test data • Milling, drilling, workover, remedial or completion operations
• Provides verification data for critical jar • Vertical, deviated, ultra-deep and ultra-hot wellbores
parameters • Coiled tubing, snubbing or concentric tubing work strings
• Ease of archiving data
• Ease of transferring data Specifications
• Eliminates human error Tool OD (in.) 1 11⁄16 2 1⁄16 2⅞
• Provides data clarity
Tool ID (in.) 9
⁄16 11
⁄16 ⁄32
31
Detent Cylinder
Data Acquisition Program
4 5
TT® Double-Acting Accelerator Tool Hydra-Stroke® Bumper Sub
The TT Double-Acting Accelerator Tool is a slimhole The Hydra-Stroke Bumper Sub is a key drillstem
impact enhancement tool designed to multiply jar component for deepwater drilling operations where
impact by providing or enhancing the stored en- drillstring oscillation can be a problem. This tool pro-
ergy source. Its small diameter makes this tool, vides six feet of reliable telescopic movement without
along with the TT® Jar, ideal for coiled tubing opera- placing any limitations on drillstring torque capacity,
tions, snubbing and small diameter rotary drilling tensile strength or hydraulic capability. The Hydra-
and fishing applications. The TT Accelerator Tool is Stroke Bumper Sub is fully balanced to the annulus
also capable of transmitting torque for compatibil- and the mud pumps, making it completely reliable at
ity with downhole motors. any depth and in any drilling environment.
6 7
TMC Hydraulic Fishing Jar, Single-Acting (Up Only) TMC Hydraulic Fishing Jar, Single-Acting (Up Only)
The TMC Hydraulic Fishing Jar
combines optimal impact charac-
• losed drive system to prevent
C
ingress of wellbore fluid into
Specifications
teristics with high-endurance con- the drive section, improving
struction to provide reliable fishing reliability Tool OD (in.) 1 13⁄15 1 13⁄15 2¼ 3⅛ 3⅛ 3¾ 3¾ 4¼
performance in harsh downhole • Interchangeable parts to allow
environments. Tool seals are tem- conversion between hydraulic Tool ID (in.) ⅜ 9
⁄16 ½ 1 1½ 1½ 2 2
perature rated to 500°F and pres- jars and accelerator tools
sure rated to 20,000 psi, and the 1 13⁄15 1 1¼ 2⅜ 2⅜ 2⅜ 2⅜ 2⅞
Tool Joint Connection
WFJ AM MT API REG. API REG. EUE API IF EUE API IF
temperature compensation system Applications
in the detent permits prolonged • Any fishing operation, includ- Assembly Number 16420 16853 16421 16213 16457 16210 16349 16204
jarring without loss of impact force. ing stuck pipe, packer retriev-
The closed drive system prevents al, tubing removal, milling and Overall Length
7' 5' 10' 12' 11' 12' 2" 11' 12' 10"
wellbore fluid from entering into debris recovery (ft., in.)
the drive section, improving tool • Plug and abandonment opera-
performance and reliability. tions, including pipe recovery Recomm. Max. Over-
pull Working Load
and wellhead removal During Restricted
19,000 17,000 20,000 51,000 32,400 59,000 38,000 73,000
Features and Benefits Travel (lbf)
Note:
• Long free travel design to opti- Jar-Pact® Program should be utilized to optimize
mize impact performance of Accelerator Tools and TMC Jars. Total Stroke (in.) 9¾ 7¼ 12 16 14 16 16 16
Smith Services recommends that the TMC Fishing
• Hydraulic metering system to Accelerator Tool be used in conjunction with this
Tensile Yield (lbf) 56,000 69,000 95,800 192,000 185,000 257,000 233,000 348,000
enable variable impact loads, tool. Contact Smith Services for more information.
controlled by the amount of Torsional Yield (lbf-ft) 800 750 1,900 4,100 4,200 6,600 7,400 11,000
upward load applied by the op- Ordering instructions, please specify:
• Hole size
erator • Connection size, type, and left- or right-hand Tool Wt. (lb.) 75 54 125 200 225 240 325 375
• Temperature rated to 500°F •
threads
Tool diameter
• Seals rated to 20,000 psi dif- • Hole temperature
ferential
• Circulation rated to 10,000 psi (continued)
• Temperature compensation
system to enable prolonged Tool OD (in.) 4¼ 4¾ 4¾ 6¼ 6½ 7¾ 8
jarring when required
Tool ID (in.) 2⅞ 2 2¼ 2¼ 2¼ 3½ 3½
2⅞ 3½ 3½ 4½ 4½ 6⅝ 6⅝
Tool Joint Connection
EUE API FH API IF API IF API IF API REG. API REG.
Overall Length
11' 13' 13' 6" 15' 15' 16' 16'
(ft., in.)
Tensile Yield (lbf) 320,000 422,000 422,000 900,000 928,000 1,304,000 1,304,000
Torsional Yield (lbf-ft) 10,000 14,000 14,000 50,000 50,000 118,000 118,000
Tool Wt. (lb.) 400 425 375 950 1,078 1,400 1,570
Detent Cylinder
8 9
TMC Fishing Accelerator, Single-Acting (Up Only) TMC Fishing Accelerator, Single-Acting (Up Only)
The TMC Fishing Accelerator Tool improves jar
impact and provides a supercharged blow direct-
Specifications
ly above the fish. Used in conjunction with the
TMC Fishing Jar, the TMC Accelerator Tool maxi- Tool OD (in.) 1 13⁄16 1 13⁄16 2¼ 3⅛ 3⅛ 3¾ 3¾ 4¼
mizes jar impact regardless of depth because
it can either replace pipe stretch as the energy Tool ID (in.) ⅜ 9
⁄16 ½ 1 1½ 1½ 2 2
source in shallow holes, or supplement the pipe 1 13⁄16 1 1¼ 2⅜ 2⅜ 2⅜ 2⅜ 2⅞
Tool Joint Connection
stretch energy in deeper wells. WFJ AM MT API REG. API REG. EUE API IF EUE API IF
Assembly Number 16422 16854 16423 16214 16459 16211 16384 16206
The TMC Accelerator Tool’s robust design, ma-
terials quality and comprehensive QA require- Overall Length (ft., in.) 5' 10" 4' 6" 8' 10' 9' 10' 4" 9' 10' 8"
ments ensure reliable performance in the harsh-
est of fishing conditions. Tensile Yield (lbf) 56,000 69,000 95,800 192,000 185,000 257,000 233,000 348,000
Features and Benefits Torsional Yield (lbf-ft) 800 750 1,900 4,100 4,200 6,600 7,400 11,000
• Reflects shock waves that propagate up **** Total Inches Traveled with Stop Sleeve 8 7¼ 10 12 10 ½ 11 ⅜ 12 11 ¼
the work string and damage tool joints, top
drives and other surface components *** Rack Test in Shop at 70° F for a Nominal BHT of 6¾@ 4¼@ 7½@ 11 @ 10 @ 10 @ 10 ⅛ @ 9⅝@
• Temperature rated to 500°F 240° F (in. @ lbf) 6,000 5,000 6,000 29,000 13,200 31,000 16,000 32,000
• Seals rated to 20,000 psi differential Oil Fluid (oz.) 2 2 2 3 2 3 3 4
• Circulation rated to 10,000 psi
• Closed drive system to prevent ingress of * Min. Overpull 7,500 6,000 5,200 19,000 8,400 22,000 16,000 32,000
wellbore fluid into the drive section, improv- Downhole at 240° F Jar and Accel-
erator Tool Combination Loads
ing reliability ** Max. Overpull 19,000 17,000 20,000 50,000 32,400 59,000 38,000 73,000
• Interchangeable parts to allow conversion
between Accelerator Tools and hydraulic Tool Weight (lb.) 60 46 100 160 130 180 160 300
jars, reducing parts inventories and increas-
ing flexibility
Applications (continued)
• Any fishing operation, including stuck pipe,
packer retrieval, tubing removal, milling and Tool OD (in.) 4¼ 4¾ 4¾ 6¼ 6½ 7¾ 8
debris recovery
Tool ID (in.) 2 7⁄16 2 2¼ 2¼ 2¼ 3½ 3½
• Plug and abandonment operations, including
pipe recovery and wellhead removal Tool Joint Connection
2⅞ 3½ 3½ 4½ 4½ 6⅝ 6⅝
EUE API FH API IF API IF API IF API REG. API REG.
Note:
Jar-Pact® Program should be utilized to optimize performance of Accel- Assembly Number 15339 16195 16414 16319 16364 16321 16367
erator Tools and TMC Jars. Contact Smith Services for more informa-
tion. Overall Length (ft., in.) 11' 8" 11' 11' 10" 12' 12' 13' 13'
Ordering instructions, please specify:
• Hole size Tensile Yield (lbf) 320,000 422,000 422,000 900,000 928,000 1,304,000 1,304,000
• Connection size, type, and left- or right-hand threads
• Tool diameter Torsional Yield (lbf-ft) 10,000 14,000 14,000 50,000 50,000 118,000 118,000
• Hole temperature
• Desired operating load
**** Total Inches Traveled with Stop Sleeve 12 12 10 ⅜ 10 ⅜ 12 12 12
Tool Weight (lb.) 268 350 325 800 900 1,200 1,350
* Minimum overpull requirement for a jar and Accelerator Tool combination to obtain an efficient impact.
Fluid Cylinder ** Maximum overpull can be increased in the shop. As the maximum increases, the minimum increases.
and Valve *** Settings for other expected bottom hole temperatures are available.
**** Check stroke before loading the Accelerator Tool. If stroke varies, stop sleeves must be modified to obtain stroke as listed.
10 11
TMC Fishing Bumper Sub Hex Fishing Bumper Sub
The TMC Fishing Bumper Sub incorporates Applications The Hex Fishing Bumper Sub provides du-
maximum stroke length and high torque • Suitable for all fishing operations, includ- rable and economical upward or downward
transmission capacity, enabling the operator ing stuck pipe, packer retrieving, tubing bumping action for fishing operations. Full
to bump up or down until fishing objectives removal, milling and debris recovery torque transmission and circulation can be
are met. The TMC Fishing Bumper Sub’s ro- • Plug and abandonment operations, in- maintained through the tool at all times, in
bust design, materials quality and compre- cluding pipe recovery and wellhead re- any stroke position. The Hex Fishing Bum-
hensive quality requirements ensure reliable moval per Sub’s robust design, materials quality
performance in the harshest downhole envi- • Releases spears or overshots, shear pins, and comprehensive quality requirements
ronments. dislodges a stuck string, and acts as a ensure reliable performance in the harshest
feed-off tool in back-off operations downhole environments.
Features and Benefits
• Temperature rated to 500°F Features and Benefits
• Seals rated to 20,000 psi differential • Hexagonal mandrel to ensure continu-
• Circulation rated to 10,000 psi ous torque transmission
• Closed drive system to prevent ingress of • Up to 36-inch stroke for solid bumping
wellbore fluid into the drive section, im- action, upward or downward
proving reliability • Full bore design to minimize pressure
losses and provide wireline tool com-
Specifications patibility
• Consists of only five major components,
Tool OD (in.) 1 13⁄16 1 13⁄16 2¼ 3⅛ 3⅛ 3¾ 3¾ 4¼ ensuring reliable performance and eco-
Tool ID (in.) ⅜ ⁄16
9
½ 1 1½ 1½ 2 2
nomical maintenance
1 13⁄16 1 1¼ 2⅜ 2⅜ 2⅜ 2⅜ 2⅞ Applications
Tool Joint Connection
WFJ AM MT API REG. API REG. EUE API IF EUE API IF • Place above a fishing tool or safety joint
to deliver forceful blows at will in both
Assembly Number 16435 N/A 16471 16215 16461 16212 16385 16208
open and cased hole fishing applica-
Overall Length (ft., in.) 4' 8" N/A 6' 7' 10" 6' 11" 8' 2" 6' 9" 8' 3" tions
• Releases spears or overshots, shear
Total Stroke (in.) 9¾ 7¼ 12 16 14 16 16 16 pins, dislodges a stuck string, and acts
as a feed-off tool in back-off operations
Tensile Yield (lbf) 56,000 69,000 95,800 192,000 185,000 257,000 233,000 348,000
• Plug and abandonment operations
*Torsional Yield (lbf-ft) 800 750 2,900 4,100 4,200 6,600 7,400 11,000 where low level jarring may be required,
or when cutting strings of casing
Tool Weight (lb.) 48 54 75 125 100 142 120 232
Ordering instructions, please specify:
• Hole size
• Drill string component OD where the tool will be utilized
Specifications (continued) • Connection size and type
• Required stroke length
Tool OD (in.) 4¼ 4¾ 4¾ 6¼ 6½ 7¾ 8
Assembly Number 16377 16202 16415 16415 16374 16375 16376 Tool ID (in.) ⅜ 1 1½ 1¼ 1 15⁄16 2 2 2¼ 2¼ 2¾ 3½ 3½
1 ⁄16
13
2⅜ 2⅜ 2⅞ 2⅞ 3½ 4½ 4½ 4½ 5½ 6⅝ 6⅝
Overall Length (ft., in.) 9' 5" 8' 8" 9' 6" 9' 8" 9' 8" 10' 4" 10' 4" Tool Joint Connection
WFJ API REG. API IF API REG. API IF API IF API IF API IF API IF API REG. API REG. API REG.
Total Stroke (in.) 16 16 16 18 18 18 18 Assy. Number 16734 16608 16541 16645 16240 16407 16431 16406 16955 16899 16606 16954
Tensile Yield (lbf) 320,000 422,000 510,000 900,000 928,000 1,304,000 1,304,000 Stroke (in.) 20 20 20 20 20 20 20 20 20 20 20 20
*Torsional Yield (lbf-ft) 10,000 14,000 14,000 50,000 50,000 118,000 118,000 Tensile Yield (lbf) 99,000 193,000 214,000 233,500 352,000 341,400 813,900 705,400 760,000 790,000 900,000 1,200,000
Tool Weight (lb.) 260 337 314 794 890 955 1,110 Torsional Yield (lbf-ft) 1,150 5,200 7,000 7,000 12,800 14,800 33,000 33,000 34,000 38,000 40,000 40,000
*Torsional yield strength is based on the tool joint connection.
Total Closed Length
41 ¾ 62 ½ 61 ½ 61 ½ 59 ⅛ 62 ½ 64 ½ 64 ½ 64 ⅝ 67 ¼ 71 ⅛ 71 ¼
Ordering instructions, please specify: (in.)
• Hole size
• Connection size, type and left- or right-hand threads Tool Weight (lb.) 25 95 140 150 140 198 390 375 415 455 655 717
• Tool diameter
12 13