Sei sulla pagina 1di 2

APPENDIX-F TECHNICAL BID EVALUATION FOR AERATION SYSTEM

CLIENT NAME: Atul Ltd. DOCUMENT NUMBER MCA-BT-DEP-EGENA-M-MRD-036


PROJECT NAME: MCA Bengal Tiger – India project REV No R0
AREA - DATE 31-10-2017
JOB NO D-00574-01-01 PREPARED BY PP
CHECKED BY UK

ACCEPTABLE ( √ )
SR. NO DESCRIPTION SPECIFICATION/REQUIREME XXXX REMARKS
NOT ACCEPTABLE( X )
NT
1.0 GENERAL INFORMATION
1.1 Bid Reference Bidder to Provide
Fine Bubble Tube Diffuser
1.2 Design and Manufacturer
Aeration System
1.3 Delivery period 60 to 90 days
2.0 GENERAL/ DESIGN CONDITION
2.1 Mechanical design Manufacturer standard ACCEPTABLE ( √ )
12 months from the date of
commissioning or 24
months after shipment,
2.2 Mechanical guarantee/warrantee ACCEPTABLE ( √ )
whichever is earlier as per
section 3 of requisition.
Bidder to confirm.
2.3 Compliance with all project specifications attached with MR Bidder to Confirm ACCEPTABLE ( √ )

3.0 INSPECTION, TESTING AND CERTIFICATION REQUIREMENTS

Test per relevant standards, codes and applicable specifications listed in As per applicable code &
3.1 ACCEPTABLE ( √ )
the requisition/ specification manufacturer standard

4.0 DOCUMENT SUBMISSION WITH BID (Documents shall be separate for


4.1 Detailed itemized price schedule Bidder to Provide ACCEPTABLE ( √ )
Completed Deviation From attached in appendix - D of the requisition. If
4.2 there is no deviation, vendor shall write "No Deviation" list format and No Deviation
submit.

4.3 Engineering/Fabrication/Production schedule 60 to 90 days

Completed Schedule of proposed source of material or equipment with


4.4 manufacturer's / sub vendor's name and their availability in the format Bidder to Provide ACCEPTABLE ( √ )
attached in Appendix - C of the Requisition
4.5 Preliminary Inspection & Test plan / Quality plan Bidder to Provide ACCEPTABLE ( √ )
4.6 Reference list of previous experience of similar equipments Bidder to Provide ACCEPTABLE ( √ )
APPENDIX-F TECHNICAL BID EVALUATION FOR AERATION SYSTEM
CLIENT NAME: Atul Ltd. DOCUMENT NUMBER MCA-BT-DEP-EGENA-M-MRD-036
PROJECT NAME: MCA Bengal Tiger – India project REV No R0
AREA - DATE 31-10-2017
JOB NO D-00574-01-01 PREPARED BY PP
CHECKED BY UK

ACCEPTABLE ( √ )
SR. NO DESCRIPTION SPECIFICATION/REQUIREME XXXX REMARKS
NOT ACCEPTABLE( X )
NT
5.0 SCOPE OF SUPPLY / SERVICES
5.1 Equipments which are in bidder scope of supply Bidder to Provide ACCEPTABLE ( √ )

Design , Engineering, Materials, fabrication, assembly, inspection , testing ,


painting, supply and shipment of the Equipment components with
5.2 Bidder to Confirm ACCEPTABLE ( √ )
accessories in accordance with the code ,data sheets, specifications,
drawing, standards as specified in the requisition.

5.3 Complete Mechanical design including calculations Bidder to Confirm ACCEPTABLE ( √ )

5.4 Name plate with bracket for each equipment SS316L ACCEPTABLE ( √ )

Access for 3rd party inspection agency during shop inspection and
5.5 provision of required tools, equipments for testing. (Cost for arranging TPI Bidder to Confirm ACCEPTABLE ( √ )
shall be done borne by client)
Required, Bidder to
5.6 Erection , commissioning and start up spares
Specify/Provide
5.7 List of recommended 2 years operational spares AS PER MR /Bidder to Provide ACCEPTABLE ( √ )

6.0 TECHNICAL REQUIREMENTS

Bidder to Confirm
6.1 Compliance to data sheets attached to MR ACCEPTABLE ( √ )
compliance

Potrebbero piacerti anche