Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
About Us
D & L Oil Tools provides down-hole tools
to both the domestic and international
markets. We are located in Tulsa, Okla-
homa, with 10 acres and 80,000 square
feet in manufacturing space.
Table of Contents
Mechanical Set Packers Service Tools
ASI-X Packer (603)..................................................... 4-5 Type T Squeeze Packer (620 & 621)..................46-47
VSI-X Packer (601)...................................................... 6-7 SC Tension Unloader (525).......................................48
AS-II Packer (610 & 611).....................................................8 Compression Unloader (531)....................................49
AS-III Packer (631)............................................................9 AS Retrievable Bridge Plug (724 & 725)..........50-51
AS-5 Packer (608)..........................................................10 Spring Loaded Retrieving Tool (577)................... 52
Snapset I Packer (635).................................................. 11 HD Retrievable Packer (613)..................................... 53
Snapset II Packer (636)................................................ 12 Type C Perforation Wash Tool (460)....................54
DLT Thermal Packer (740). ........................................ 13 Stradasnap (645)........................................................... 55
IE Thermal Packer (741)............................................... 14 HD Abandonment Packer (615)..............................56
TM Anchor/Catcher (320).......................................... 15 Abandonment Valve (615)......................................... 57
Drag Block Tubing Anchor/Catcher (325).......... 16 Abandonment Packer Accessories (616)........... 58
Casing Packer (440)...................................................... 17 Model “H” Hydraulic Setting Tool (391)............... 59
D-H Tension Packer (405 & 406).......................... 18-19 LC Hydraulic Setting Tool (394).............................60
DL Tension& DL Shear Tension Packer Cement Retainer (840)................................................ 61
(401 & 412)................................................................20-21
CIW Bridge Plugs (850)............................................. 62
GV Cup Packer (439)................................................... 22
Gas Vent Pumping Packer (421)............................. 23
GV-6 Isolation Packer (425 & 426)............................ 24 Tool Accessories
Retrievable Seal Bore Packer - Single Bore DT-2 On/Off Tool (512).........................................64-65
(260 & 265)..................................................................... 25
Profile Nipple (511)........................................................66
Retrievable Seal Bore Packer - Dual Bore
(268)............................................................................... 26 Bit Release Joint (801)................................................ 67
RSB Retrieving Tool (266, 269 & 276)........................ 27 Safety Joint - Shear, Rotational,
and Swivel Shear (563, 568, & 569).......................68
Type DL-IB Tandem Tension Packer (436)........ 28
Pump-Out Plug (597)..................................................69
Set Down Isolation Packer (641)............................ 29
Downhole Tubing/Casing Swivel
(830 & 480)....................................................................70
Hydraulic Set Packers Cross Flow Assembly (676)....................................... 71
DLH Packer (935)................................................... 32-33 Expansion Joints (532, 534, 537, 538 & 539)................. 72
Hydroset II Packer (905).....................................34-35 Pump-Out Cementing Sleeve (220)..................... 73
Hydroset IV (654)..........................................................36 Type E Valve (124)......................................................... 74
Permanent Packers
Permapak Seal Bore Packer (670 & 672)........38-39
Permapak Accessories (673)............................ 40-41
Hydraulic Permapak (681)...........................................42
Permapak Setting Equipment (970)....................43
ASI-X Packer
The D&L ASI-X Packer is the most differential pressures up to 10,000 PSI.
versatile of the mechanically set This feature allows the packer to be
retrievable packers and may be used utilized in completions where high
in any production application. The pressure treating operations are
ASI-X Packer is suited for treating, performed and it is desirable to leave
testing, or injection applications, in the tool in the well for production.
pumping or flowing wells, either deep
or shallow. The packer can be left in Special Features
tension or compression, depending u By-pass below upper slips to wash
on well conditions and the required
debris when valve is opened
application. A large internal by-pass
u By-pass is opened before upper slips
reduces swabbing when running and
retrieving. The by-pass closes when the are released
packer is set and opens prior to releasing u Can be set with tension for shallow well
the upper slips when retrieving to allow applications
pressure equalization. The J-Slot design u Can be left in tension, compression
allows easy setting and releasing; 1/4 or neutral
turn right-hand set, right-hand release.
u 1/4 turn right-hand set, right-hand
The ASI-X Packer is also available in release
an HT version which can withstand
u Additional J-Slot arrangements
available
Product Specifications
Casing Recommended Part Number
Tool OD Tool ID Thread Connection
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Std HT
6.4-6.5 2.441 2.250 0.63 1.050 EUE 60325 -
2-7/8
8.6 2.259 2.125 0.63 1.050 EUE 60324 -
7.5-7.7 3.068 2.937 1.25 1.900 NUE 60336 -
3-1/2 7.7-10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 60335 -
12.95 2.750 2.562 1.00 1.315 NUE / 1.660 EUE 60337 -
9.5-11 3.476 - 3.548 3.250 1.50 1.900 EUE 60340 -
4
10.46-12.95 3.340 - 3.476 3.187 1.50 1.900 EUE 60341 -
9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 60345 60345HT
4-1/2
13.5-15.1 3.826 - 3.920 3.656 1.94 2-3/8 EUE 60344 60344HT
4 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #603
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#603 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 5
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
VSI-X Packer
The D&L VSI-X Single String Double- The VSI-X Packer converts to a
Grip Production Packer is one of the mechanically set ASI-X by removing the
most versatile packers on the market. shear screws and installing drag blocks.
It is a modification of the ASI-X Packer This packer sets with 1/4 right-hand
with the advantage of being able to set rotation; and releases with 1/4 right-
on electric line or hydraulically. hand rotation and can be left in tension,
compression or neutral.
An On-Off Tool Stinger with Wireline
Plug installed can be attached to the
top of the VSI-X Packer which can then
Special Features
be lubricated in the hole and set u Wireline or Tubing set
under pressure. Once set, casing pressure u Sequentially released upper slip
can be bled off and the tubing with an system
On-Off Tool Overshot can be run and
u Bypass valve opens before upper slips
latched onto the packer. The Wireline
are released
Plug can then be removed.
u 1/4 turn to set, 1/4 turn to release
(ASI-X version)
u Available in shear release
Product Specifications
Casing Recommended Part Number
Tool OD Tool ID Thread Connection
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Std HT
2-7/8 6.4-6.5 2.441 2.250 0.63 1.050 EUE 60125 -
7.5-7.7 3.068 2.938 1.25 1.900 NUE 60136 -
3-1/2 7.7-10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 60135 -
12.95 2.750 2.562 1.12 1.315 NUE / 1.660 EUE 60137 -
9.5-11 3.476 - 3.548 3.250 1.50 1.900 EUE 60140 -
4
10.46-12.95 3.340 - 3.476 3.187 1.50 1.900 EUE 60141 -
9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 60145 60145HT
13.5-15.1 3.826 - 3.920 3.656 1.94 2-3/8 EUE 60144 60144HT
4-1/2 15.1 3.826 3.641 1.94 2-3/8 EUE 60146 -
15.1-16.6 3.754 - 3.826 3.594 1.50 1.900 EUE 60143 60143HT
18.8 3.640 3.437 1.50 1.900 EUE 60142 -
*Other sizes and connections available upon request
6 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #601
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#601 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 7
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
AS-II Packer
The D&L AS-II Packer is a double Special Features
grip, compression-set tool ideally suited
u Large internal by-pass
for treating, testing and production
applications. The AS-II Packer features u Mechanical slips vs. Hydraulic
a large by-pass area to prevent buttons
swabbing when running or retrieving. u Differential pressure holds valve
Once the tool is set, pressure from closed
above or below acts down on the valve
u Additional J-slot arrangements
maintaining the seal and preventing
available
upward movement of the tubing.
Releasing the valve allows debris to be
washed from the upper slips.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
2-7/8 6.4-6.5 2.441 2.250 0.62 1.050 EUE 61125
7.7-10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 61135
3-1/2 7.7-10.2 2.922 - 3.068
2.938 1.25 1.900 NUE 61136
4 9.5-11 3.476 - 3.548 3.250 1.50 1.900 EUE 61140
9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 61145
4-1/2
15.1 3.826 3.656 1.94 2-3/8 EUE 61144
11.5-18 4.276 - 4.560 4.125 1.94 2-3/8 EUE 61150
5
18-21.4 4.126 - 4.276 4.000 1.94 2-3/8 EUE 61152
14-17 4.892 - 5.012 4.625 2.00 2-3/8 EUE 61155
14-20 4.778 - 5.012 4.625 2.38 2-7/8 EUE 61156
5-1/2
2.00 2-3/8 EUE 61157
20-23 4.670 - 4.778 4.500
2.38 2-7/8 EUE 61159
17-24 5.921 - 6.135 5.750 2.50 2-7/8 EUE 61167
6-5/8
24-32 5.675 - 5.921 5.500 2.50 2-7/8 EUE 61165
17-26 6.276 - 6.538 6.000 2.50 2-7/8 EUE 61172
7
26-32 6.094 - 6.276 5.875 2.50 2-7/8 EUE 61170
7-5/8 33.7-39 6.625 - 6.765 6.453 3.00 3-1/2 EUE 61177
32.3-43.5 8.755 - 9.001 8.500 3.00 3-1/2 EUE 61198
32.3-43.5 8.755 - 9.001 8.500
32.3-43.5 8.755 - 9.001 8.500 4.00 4-1/2 EUE 61196
9-5/8
43.5-53.5 8.535 - 8.755 8.250 3.00 3-1/2 EUE 61197
43.5-53.5 8.535 - 8.755 8.250
43.5-53.5 8.535 - 8.755 8.250 4.00 4-1/2 EUE 61195
*Other sizes and connections available upon request
8 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#610
#611
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
AS-III Packer
The D&L AS-III Packer is a single- Special Features
grip packer with no upper hold-down
u Large internal by-pass
for use where no differential pressure
from below is present. From the packing u 1/4 turn set / straight pick-up release
elements down, the AS-III Packer u Additional J-slot arrangements
operates identically to the D&L available
AS-II Packer. The AS-III Packer also
features a large by-pass area to
prevent swabbing when running
or retrieving. The AS-III Packer is
ideal for isolating casing holes or
perforations when used as the lower
packer in conjunction with the D&L
Snapset Packer as the upper packer.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
3-1/2 7.7-10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 63135
4-1/2 9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 63145
5 11.5-15 4.408 - 4.560 4.125 1.94 2-3/8 EUE 63150
14-20 4.778 - 5.012 4.625 1.94 2-3/8 EUE 63155
14-20
4.778 - 5.012 4.625
63156
5-1/2 2.38 2-7/8 EUE
63158
20-23 4.670 - 4.778 4.500 2.00 2-3/8 EUE 63157
17-24 5.921 - 6.135 5.750 2.50 2-7/8 EUE 63165
6-5/8
24-32 5.675 - 5.921 5.500 2.50 2-7/8 EUE 63167
17-26 6.276 - 6.538 6.000 2.50 2-7/8 EUE 63172
7 2.50 2-7/8 EUE 63170
26-32 6.094 - 6.276 5.875
3.00 3-1/2 EUE 63173
7-5/8 24-29.7 6.875 - 7.025 6.672 2.50 2-7/8 EUE 63175
8-5/8 28-40 7.725 - 8.017 7.500 4.00 3-1/2 EUE 63182
32.3-43.5 8.755 - 9.001 8.500 4.00 3-1/2 EUE 63196
9-5/8
43.5-53.5 8.535 - 8.755 8.250 2.50 2-7/8 EUE 63198
*Other sizes and connections available upon request
#631 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 9
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
AS-5 Packer
The D&L AS-5 Packer is a compression Special Features
set tool with a J-slot to control pack-off.
u Large internal by-pass
It is run above other packers such as
the D&L AS-III to selectively treat, u Mechanical slips vs. hydraulic buttons
produce or inject in multiple zone u Additional J-slot arrangements
completions. It is also used to isolate available
casing hole perforations. The AS-5 Packer
features a large by-pass area to prevent
swabbing when running and retrieving.
Releasing the valve allows debris to be
washed from the upper slips.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
10 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #608
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Snapset I Packer
The D&L Snapset I Packer is a com- Special Features
pression set tool requiring only straight
u Large internal by-pass
set down weight to pack-off. It is run
above other packers such as the ASI-X, u Set down to pack off, pick up to
AS-II or AS-III for selective production release
to isolate casing holes and perforations. u Compact design
This packer has no upper or lower
slips and should be used only where
intermediate differential pressures from
below are expected. The Snapset I
Packer has an internal latch to prevent
the packer from pre-setting when
running down the hole. When releasing,
the latch re-engages to allow movement
down hole.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#635 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 11
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Snapset II Packer
The D&L Snapset II Packer is a tubing. Releasing the valve allows de-
compression set tool requiring only bris to be washed from the upper slips.
straight set down weight to pack-off. It This packer is also equipped with an
is run above other packers such as the internal latch to prevent pre-setting when
AS-III to selectively treat, produce or running. When releasing, the latch re-
inject in multiple zone completions. It engages to allow movement down hole.
is also used to isolate casing hole
perforations. The Snapset II Packer Special Features
features a large by-pass area to u Large internal by-pass
prevent swabbing when running
u Set down to pack off, pick up to
and retrieving. Once the tool is set
pressure from above or below acts down release
on the valve maintaining the seal and u Mechanical slips vs. hydraulic buttons
preventing upward movement of the u Differential pressure holds valve closed
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
3-1/2 7.7-10.2 2.922 - 3.068 2.781 1.25 1.900 NUE 63635
9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 63645
4-1/2 15.1 3.826 3.656 1.94 2-3/8 EUE 63644
18.8 3.640 3.437 1.48 1.900 EUE 63646
11.5-15 4.408 - 4.560 4.125 1.94 2-3/8 EUE 63650
5
18-21 4.154 - 4.276 4.000 1.94 2-3/8 EUE 63652
2.00 2-3/8 EUE 63655
14-20 4.778 - 5.012 4.625
2.38 2-7/8 EUE 63656
5-1/2
2.00 2-3/8 EUE 63657
20-23 4.670 - 4.778 4.500
2.38 2-7/8 EUE 63658
6-5/8 24-32 5.675 - 5.921 5.500 2.50 2-7/8 EUE 63665
2.50 2-7/8 EUE 63672
17-26 6.276 - 6.538 6.000
7 3.00 3-1/2 EUE 63674
26-32 6.094 - 6.276 5.875 2.50 2-7/8 EUE 63670
24-29.7 6.875 - 7.025 6.670 2.50 2-7/8 EUE 63675
7-5/8
33.7-39 6.625 - 6.765 6.453 2.50 2-7/8 EUE 63676
9-5/8 32.3-43.5 8.755 - 9.001 8.500 3.00 3-1/2 EUE 63696
*Other sizes and connections available upon request
12 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #636
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#740 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 13
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
IE Thermal Packer
The IE Thermal Packer is D&L’s ideally suited for huff and puff
DLT Thermal Packer with an Internal operations as well as continuous steam
Expansion (IE) Joint. injection. The packer is equipped with
high temperature EPDM elements with
The DLT Thermal Packer is a double-
wire mesh backups to prevent extrusion
grip retrievable packer designed for
for service up to 450° F (an element
steam injection/production. The packer
package for 650° F is also available).
design is based on our highly successful
ASI-X Packer. The DLT Thermal Packer
features a double-grip hold down Special Features
system capable of holding pressure u J-Slot controlled expansion joint
from above and below. This feature
u Based on proven ASI-X design
allows the packer to maintain pack-off
and prevent movement of the packing u Safety shear release
element without having the packer in u Expansion joint up to 20 Ft available
tension or compression. The double-
grip feature allows the packer to be
Product Specifications
Casing Recommended Thread
Tool OD Tool ID Part
Size Weight Hole Size Connection
(inches) (inches) Number
(inches) (lbs/ft) (inches) Box Up/Pin Down
11.5-15 4.408 - 4.560 4.125 1.50 2-3/8 EUE 74150
5
18-20.8 4.156 – 4.276 4.000 1.50 2-3/8 EUE 74152
7 17-26 6.276 - 6.538 6.000 3.00 3-1/2 EUE 74170
9-5/8 32.3-43.5 8.755 – 9.001 8.500 4.00 4-1/2 EUE 74195
*Other sizes and connections available upon request
14 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #741
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
TM Anchor/Catcher
The D&L TM Anchor/Catcher is Special Features
a retrievable positive action anchor
u Stainless steel drag springs
tool to hold tubing strings in tension
or compression during pump strokes u Enclosed slips
to prevent tubing buckling. This u Rotation or shear release
increases pumping efficiency while
u Safety release value
reducing rod and tubing wear.
easily adjusted
This tool also catches the tubing
should it part. Stainless steel drag
springs employ low stress value to
minimize failure under corrosive
conditions. If the TM Anchor/Catcher
cannot be released with right-hand
rotation, it is equipped with a shear
release activated by an upward pull.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#320 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 15
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Casing Recommended Thread
Tool OD Tool ID Part
Size Weight Hole Size Connection
(inches) (inches) Number
(inches) (lbs/ft) (inches) Box Up/Pin Down
4-1/2 9.5-13.5 3.920 - 4.090 3.750 1.94 2-3/8 EUE 32545
2.00 2-3/8 EUE 32555
5-1/2 13-20 4.778 - 5.044 4.500
2.44 2-7/8 EUE 32556
2.50 2-7/8 EUE 32570
7 17-32 6.094 - 6.538 5.750
3.00 3-1/2 EUE 32573
7-5/8 24-39 6.625 - 7.025 6.400 2.50 2-7/8 EUE 32575
8-5/8 24-40 7.725 – 8.097 7.500 4.00 4-1/2 EUE 32585
9-5/8 32.3-53.5 8.535 – 9.001 8.250 4.00 4-1/2 EUE 32595
*Other sizes and connections available upon request
16 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #325
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Casing Packer
The D&L Casing Packer is a large bore Special Features
single grip tool used to isolate damaged
u Set/run in tension or compression
casing and for production or injection.
It can be run in tension or compression u Applicable for set in open hole
and can be used as a liner hanger when u Can be used as a liner hanger
equipped with a right-hand release
u Full opening
sub. Coarse, deep wickered slips allow
the packer to set in open-hole or scaly u Coarse, deep wickered slip teeth
casing. For open-hole set, casing u Available with right-hand or left-hand
packers can be equipped with two set - manual or automatic release
elongated packing elements to assure a
positive seal.
Product Specifications
Casing Recommended Thread
Tool OD Tool ID Part
Size Weight Hole Size Connection
(inches) (inches) Number
(inches) (lbs/ft) (inches) Box Up/Box Down
9.5-13.5 3.920 - 4.090 3.750 2.50 2-7/8 EUE 44045
4-1/2
15.1 3.826 3.656 2.50 2-7/8 EUE 44044
11.5-18 4.276 - 4.560 4.000 2.50 2-7/8 EUE 44050
5
18-21.4 4.126 - 4.276 3.875 2.50 2-7/8 EUE 44051
13-17 4.892 - 5.044 4.650 3.50 4” NUE 44056
5-1/2
13-20 4.778 - 5.044 4.625 3.00 3-1/2 EUE 44055
5-3/4 14-17 5.190 - 5.290 4.875 3.50 4-1/2 EUE 44057
6 18-20 5.352 - 5.424 4.650 3.50 4” EUE 44060
6-5/8 20-28 5.791 - 6.049 5.625 4.00 4-1/2 LTC 44065
17-38 5.920 - 6.538 5.750 4.00 4-1/2 LTC 44070
7
20-29 6.184 - 6.456 5.969 4.50 5” LTC 44071
4.00 4-1/2 LTC 44075
7-5/8 20-33.7 6.765 - 7.125 6.500
5.00 5-1/2 LTC 44076
24-36 7.825 - 8.097 7.656 6.00 6-5/8 LTC 44086
8-5/8 4.00 4-1/2 LTC 44084
24-40 7.725 - 8.097 7.500
5.00 5-1/2 LTC 44085
9-5/8 32.3-43.5 8.755 - 9.001 8.500 6.28 7” LTC 44095
10-3/4 32.75-55.5 9.760 - 10.192 9.500 6.50 7” LTC 44010
11-3/4 42-65 10.682 - 11.084 10.500 8.00 8-5/8 LTC 44011
13-3/8 48-77 12.275 - 12.715 12.000 8.75 9-5/8 LTC 44013
18-5/8 87.5-117.5 17.439 - 17.755 17.000 12.50 13-3/8 STC 44018
*Other sizes and connections available upon request
#440 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 17
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
18 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#405
#406
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
4-1/2
3.920 - 4.090 3.750 1.94 2-3/8 EUE 40645
4.778 - 5.044 4.625 1.94 2-3/8 EUE 40655
5-1/2
4.778 - 5.044 4.625
4.778 - 5.044 4.625 2.44 2-7/8 EUE 40656
6 5.000 - 6.220 4.875 1.94 2-3/8 EUE 40660
6-5/8
5.675 - 5.921 5.500 2.50 2-7/8 EUE 40665
6.184 - 6.538 6.000 2.00 2-3/8 EUE 40672
6.184 - 6.538 6.000
6.184 - 6.538 6.000 2.50 2-7/8 EUE 40670
7
6.094 – 6.135 5.750 2.00 2-3/8 EUE 40674
6.094 – 6.135 5.750
6.094 – 6.135 5.750 2.50 2-7/8 EUE 40671
8-5/8
7.725 - 8.097 7.500 3.00 3-1/2 EUE 40687
#405
#406
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 19
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
20 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#401
#412
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#401
#412
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 21
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
GV Cup Packer
The D&L Type GV Cup Packer is an Special Features
economical means of isolating casing
u Economic design
leaks and depleted zones and is also a
production or injection packer for low u Cup direction option
pressure applications. Depending on u Tubing size options
application, this packer can be run with
cups opposed or in the same direction.
The GV Cup Packer is also available
with packing element back-up rings for
higher pressure applications and comes
in a full range of tubing and casing sizes
in two-cup or four-cup models.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
3-1/2 9.2-10.3 2.922 - 2.992 2.810 1.50 1.900 NUE 43935
2.00 2-3/8 EUE 43945
9.5-13.5 3.920 - 4.090 3.750
4-1/2 2.50 2-7/8 EUE 43946
15.1 3.826 3.650 2.00 2-3/8 EUE 43947
5 18 4.276 4.130 2.00 2-3/8 NUE 43950
2.00 2-3/8 EUE 43955
13-20
4.778 - 5.044 4.625
2.50 2-7/8 EUE 43956
5-1/2
3.00 3-1/2 NUE 43953
20-26 4.548 - 4.778 4.375 2.50 2-7/8 EUE 43957
20 6.049 5.750 3.00 3-1/2 EUE 43965
6 5/8
20-24 5.921 - 6.049 5.750 4.00 4-1/2 LTC 43966
2.00 2-3/8 EUE 43970
17-29 6.184 - 6.538 6.000
2.50 2-7/8 EUE 43971
7 20-29 6.184 - 6.456 6.000
3.00 3-1/2 EUE 43973
4.00 4-1/2 LTC 43974
24-26.4 6.969 - 7.025 6.750 2.50 2-7/8 EUE 43976
7-5/8
29.7-33.7 6.765 - 6.875 6.375 2.50 2-7/8 EUE 43975
8-5/8 28-36 7.825 - 8.017 7.375 2.50 2-7/8 EUE 43985
9-5/8 40-47 8.681 - 8.835 8.450 3.00 3-1/2 EUE 43995
10-3/4 40.5-55.5 9.760 - 10.050 9.710 4.00 4-1/2 LTC 4391075
*Other sizes and connections available upon request
22 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #439
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Standard
Product Specifications
Casing
Tubing Size Liner Size Tool OD Tool ID Part
Size Weight (inches) (inches) (inches) (inches) Number
(inches) (lbs/ft)
4-1/2 9.5-13.5 2-3/8 3” LINE PIPE 3.813 2.69 42145
2-3/8 3” LINE PIPE 4.000 2.75 42155
5-1/2 13-20
2-7/8 3-1/2” LINE PIPE 4.625 3.13 42156
7 20-29 2-7/8 4-1/2” LTC 5.000 3.13 42170
*Other sizes and connections available upon request
4 Cup Version
#421 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 23
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
24 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#425
#426
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Casing Recommended Packer Min ID Thru
Tool OD Part
Size Weight Hole Size (inches) Bore Seals
(inches) (lbs/ft) (inches) (inches) (inches) Number
5 18 - 20.8 4.156 – 4.276 4.000 2.688 1.94 26550
2.688 1.94 26055
5-1/2 14 – 20 4.778 - 5.044 4.625
3.000 2.38 26555
6-5/8 20-32 5.675-6.049 5.468 3.250 2.42 26065
3.000 2.38 26071
17 - 20 6.456 - 6.538 6.125
4.000 3.00 26571
3.000 2.38 26070
7 23 - 29 6.184 – 6.366 5.938
4.000 3.00 26570
3.000 2.38 26072
32 - 35 6.004 - 6.094 5.812
4.000 3.00 26572
3.000 2.38 26078
7-5/8 33.7 - 39 6.625 - 6.765 6.375
4.000 3.00 26578
4.000 3.00 26085
24 - 40 7.725 – 8.097 7.500
4.750 4.00 26585
8-5/8
4.000 3.00 26086
40 – 49 7.511 – 7.725 7.312
4.750 4.00 26586
4.750 3.50 26094
9-5/8 40 - 47 8.681 - 8.835 8.375
6.000 4.75 26594
*Other sizes and connections available upon request
#260
#265
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 25
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Casing Recommended Upper
Tool OD Tool ID Part
Size Weight Hole Size (inches) (inches) Seal Bore Number
(inches) (lbs/ft) (inches) (inches)
13-20 4.778 - 5.044 4.625 3.00 4.000 26855
5-1/2 3.00 4.000
20-23 4.670 - 4.778 4.500 26857
17-26 6.276 - 6.538 5.938 4.00 5.250 26870
7 4.00 5.250
26-32 6.094 - 6.276 5.875 26871
7-5/8 24-29.7 6.875 - 7.025 6.672 4.00 4.750 26875
*Other sizes and connections available upon request
26 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #268
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#266
#269
#276
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 27
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Type DL-IB
Tandem Tension Packer
The D&L DL-IB Tandem Tension Packer Packer. Set down weight shears the
is an economical, compact, low-pressure, pins; left-hand rotation and applied
tension set, isolation packer used in tension will set the tool.
casing or perforations and multi-zone
injection installations. This packer runs
Special Features
with a tension set packer below. It can
u Economical
be run with the J-pins in the unjayed
position, or in the jayed position. In the u Run in jayed position,
unjayed position, applying tension shears or unjayed position
the shear pins and allows pack-off. u Optional J-configurations
If run in the jayed position, the DL-IB
Tandem Tension Packer must be used
in conjunction with the D&L ASI-X
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
28 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #436
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#641 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 29
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
DLH Packer
The D&L DLH Packer is a hydraulic- Special Features
set single-string retrievable packer and
u Adjustable setting initiation pressure
may be used in virtually any production
application. Tubing pump pressure is u Adjustable shear release
used to set the packer and the setting u Straight pull release
force is locked into the packer by a
body lock ring. A large internal by-pass
reduces swabbing when running and
retrieving. The by-pass closes when
the packer is set, and opens during the
releasing process to allow pressure
equalization. Shear screws are used
to control the packer release. The
standard DLH Packers are designed for
differential pressures up to 7,500 PSI.
32 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #935
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#935 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 33
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Hydroset II Packer
The D&L Hydroset II Packer is a
hydraulic set, mechanically held dual
string production packer run above a
single string hydraulic set or wireline set
seal bore packer. Its short length makes
it ideal for deviated wells or doglegs.
Because no tubing manipulation is
required to set this packer, the well head
can be installed and flanged up before
setting. It is available with short string
or long string setting capabilities and
a variety of tubing connections. It is
also adaptable for submersible pump
applications. The Hydroset II features
a sequential upper slip release system
designed to release each slip individually
reducing the pull required to release the
packer. Due to the angles on the upper
slips and upper slip cage, slips release
smoothly from the casing.
Design Options
u Several short string options available:
- Solid Connection (Flat Top)
- J-Latch (complete with Scoop
Head)
- Snap Latch (complete with
Scoop Head)
u Feed-Through tubes can be added to
most designs
u Cable Pack-off Subs
u Adjustable Unions
u Telescoping Unions
34 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #905
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
5-1/2 14-20 4.778 - 5.012 4.63 1.900 EUE 1.61 1.660 EUE 1.38 90555-BAA-166E
17-26 6.276 - 6.538 6.026 2-3/8 EUE 1.94 2-3/8 EUE 1.94 90572-BAB-BAB
17-26 6.276 - 6.538 6.026
17-26 6.276 - 6.538 6.026 2-7/8 EUE 2.44 1.900 EUE 1.61 90572-BAC-BAA
7 26-32 6.094 - 6.276 5.938 2-3/8 EUE 1.94 2 3/8 EUE 1.94 90570-BAB-BAB
26-32 6.094 - 6.276 5.938
26-32 6.094 - 6.276 5.938 2-7/8 EUE 2.44 1.900 EUE 1.61 90570-BAC-BAA
29-35 6.004 - 6.184 5.875 2-3/8 EUE 1.94 2 3/8 EUE 1.94 90571-BAB-BAB
24-32 7.921 - 8.097 7.69 2-7/8 EUE 2.44 2-7/8 EUE 2.44 90585-BAC-BAC
24-32 7.921 - 8.097 7.69
8-5/8 24-32 7.921 - 8.097 7.69 3-1/2 EUE 2.99 2-3/8 EUE 1.94 90585-BAE-BAB
36-40 7.725 - 7.825 7.44 2-7/8 EUE 2.44 2-3/8 EUE 1.94 90586-BAC-BAB
32.3-40 8.835 - 9.001 8.615 3-1/2 EUE 2.99 1.900 EUE 1.61 90597-BAE-BAA
32.3-40 8.835 - 9.001 8.615 3-1/2 EUE 2.99
32.3-40 8.835 - 9.001 8.615 3-1/2 EUE 2.99 2-3/8 EUE 1.94 90597-BAE-BAB
32.3-40 8.835 - 9.001 8.615
8.615 3-1/2 EUE 2.99 2-7/8 EUE 2.44 90597-BAE-BAC
32.3-40 8.835 - 9.001 8.615 3-1/2 EUE 2.99
32.3-40 8.835 - 9.001 8.615 3-1/2 EUE 2.99 3-1/2 EUE 2.99 90597-BAE-BAE
32.3-40 8.835 - 9.001 8.615 4-1/2 EUE 3.96 1.900 EUE 1.61 90597-BAG-BAA
36-43.5 8.755 - 8.921 8.500 3-1/2 EUE 2.99 2-3/8 EUE 1.94 90595-BAE-BAB
9-5/8 36-43.5 8.755 - 8.921 8.500 3-1/2 EUE 2.99
2.99 2-7/8 EUE 2.44 90595-BAE-BAC
36-43.5 8.755 - 8.921 8.500
36-43.5 8.755 - 8.921 8.500 3-1/2 EUE 2.99 3-1/2 EUE 2.99 90595-BAE-BAE
36-43.5 8.755 - 8.921 8.500 4-1/2 EUE 3.96 1.900 EUE 1.61 90595-BAG-BAA
47-53.5 8.535 - 8.681 8.312 3-1/2 EUE 2.99 1.900 EUE 1.61 90596-BAE-BAA
47-53.5 8.535 - 8.681 8.312 3-1/2 EUE 2.99 2-3/8 EUE 1.94 90596-BAE-BAB
47-53.5 8.535 - 8.681 8.312 3-1/2 EUE 2.99
47-53.5 8.535 - 8.681 8.312 3-1/2 EUE 2.99 2-7/8 EUE 2.44 90596-BAE-BAC
47-53.5 8.535 - 8.681 8.312 3-1/2 EUE 2.99 3-1/2 EUE 2.99 90596-BAE-BAE
*Other sizes and connections available upon request
#905 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 35
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Hydroset IV
The D&L Hydroset IV is a hydraulic set Special Features
single string retrievable packer. Tubing
u Simple operation
pump pressure is used to set the packer
and the setting force is locked into the u Compact
packer by a body lock ring. Its design u Field adjustable setting pressure
allows for multiple zone completions. It
u Field adjustable releasing force
can be run with other hydraulic packers
or mechanical set packers.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
36 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #654
Permanent Packers
38 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#670
#672
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#670
#672
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 39
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Permapak Accessories
Mill-Out Extension
A D&L Mill-Out Extension
is used in installations where
Seal Bore Extension floating seals are required due to
A D&L Seal Bore Extension tubing contractions. In addition,
is used in installations where this packer accessory provides
floating seals are required due a larger ID between a packer
to tubing contractions. This bore and a seal bore extension
packer accessory allows for allowing a packer plucker when a
a continuous seal bore and is packer is milled out.
available in lengths up to twenty
feet. Pump Out Plug
A D&L Pump Out Plug is
available with a choice of threads
Seal Bore to Mill-Out allowing the pump-out plug to be
Coupling attached to a packer, seal bore
extension, mill-out extension or
A D&L Seal Bore to Mill-Out tailpipe and hold pressure from
Coupling is used to connect below after the packer is set.
mill-out extensions to seal bore Once the production string is
extensions. landed, pressure is applied to the
tubing and the pump-out plug is
removed to allow full opening.
Knock-Out Plug
Concentric Coupling Bottom
A D&L Concentric Coupling When a D&L Knock-Out
is used to connect seal bore Bottom is run below the packer,
extensions to increase length. the knock-out plug allows a
packer to serve as a bridge plug
holding pressure from above and
below.
40 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #673
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Permapak Accessories
Seal Unit
The D&L Standard Seal Units are
furnished with bonded nitrile rings and a
12-inch make-up length. These units may
be ordered in various lengths and with
severe service seal rings for high tem-
perature and corrosive environmental
conditions.
#673 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 41
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Hydraulic Permapak
The D&L Hydraulic Permapak hydrau- Special Features
lic-set seal bore packers are the hydrau-
u Uses proven Permapak components
lic set equivalent of the Permapak Seal
Bore Packers. The full range of Permapak u Compatible with Permapak options
Seal Bore accessories may be used with u Optional upper sealbore available
the Hydraulic Permapak.
u Single or dual bore option
Pressure sets the packer via a setting
chamber built into the tool. Pressure en-
ters the setting chamber via holes in the
polished packer bore. These holes can
be isolated with a ball-operated sub so
that other hydraulic operated tools can
be functioned before setting the packer.
42 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #681
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Setting Setting
Tool OD External Threads Internal Threads Packer Sizes
Tool Size (inches)
2-3/8”
05 1.718 1-1/4” UNS 5/8” UNF 2-7/8”
3-1/2”
4”
10 2.750 2-1/2” ACME 1” UNC 4-1/2”
5”
#970 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 43
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
46 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#620
#621
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#620
#621
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 47
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
SC Tension Unloader
The SC Tension Unloader provides Special Features
a means of equalizing tubing and
u Apply set-down weight to open,
annulus pressures when used with a
and tension to close
tension packer. It also serves as a
by-pass to allow fluid to pass through u Unloads pressure from either
the mandrel of the packer while running direction
the tubing string in and out of the well. u May be run in open or closed
position
u Bonded seal allows repeated opening
u Transmits torque for packer
operations
Product Specifications
Size Tool OD Tool ID Thread Connection Part
(inches) (inches) (inches) Box Up/Pin Down Number
48 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #525
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Compression Unloader
The Compression Unloader is de- Special Features
signed as a high-pressure accessory for
u Standard J-slot locks in open
compression set packers. The Unloader
and closed positions
is run above the packer in the open
position. After the packer is run to u Standard J-slot is right-hand
setting depth, the procedures required close, right-hand open
to set the packer will automatically close u J-slot is available in various
the unloader. The J-slot locks in both configurations
the open and closed positions. With
the packer set and the unloader closed,
well operations may proceed. When
run above a compression set packer,
the Unloader is opened by rotating the
tubing 1/4 turn and picking up (standard
is right-hand close, right-hand open).
After opening the unloader, allow
differential pressure to equalize before
releasing the packer below.
Product Specifications
Size Tool OD Tool ID Thread Connection Part
(inches) (inches) (inches) Box Up/Pin Down Number
#531 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 49
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Special Features
u 1/4 right-hand set and release
(standard)
u Large by-pass
u Set shallow or deep
u Pressure equalization before release
u High pressure rating
u Additional J-slot arrangements
available
50 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#724
#725
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#724
#725
Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 51
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Thread
Size Tool OD Connection Part Number
(inches) (inches)
Box Up
3-1/2 2.750 1.900 EUE 57735
4 3.125 1.900 EUE 57740
4-1/2 3.750 2-3/8 EUE 57745
5 4.125 2-3/8 EUE 57750
2-3/8 EUE 57755
5-1/2 4.500
2-7/8 EUE 57756
6-5/8 5.437 2-7/8 EUE 57765
7 5.875 2-7/8 EUE 57770
7-5/8 6.375 2-7/8 EUE 57775
8-5/8 7.500 3-1/2 EUE 57785
9-5/8 8.250 3-1/2 EUE 57795
10-3/4 9.312 3-1/2 EUE 57710
11-3/4 10.370 4-1/2 EUE 57711
14 12.000 4-1/2 IF 57714
*Other sizes and connections available upon request
52 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #613
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
HD Retrievable Packer
The D&L HD Retrievable Packer is a Special Features
high pressure, full opening, compression
u Large internal by-pass
set tool for squeeze cementing,
acidizing, fracturing and other stimu- u Built in pressure-balanced unloader
lation procedures. This tool features a u 1/4 turn set-straight pick up release
pressure-balanced unloader that closes (standard)
when the packer sets. While pressure
u Equalizing ports directly above
aids in maintaining the seal, the
elements
unloader can be easily opened under high
differential pressure. The large internal u Additional J-slot arrangements
by-pass reduces swabbing when available
running and retrieving.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#577 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 53
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Casing Recommended Tool OD Thread Connection Part
Size Weight Hole Size (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
54 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #460
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Stradasnap
The D&L Stradasnap Packer consists After locating the packer across the
of a modified Snapset II Packer lower-most perforation, the packer is set
combined with an AS-III Packer. A and the perforation is treated. Straight
Modified Snapset II
Stradasnap Packer tool is used for pick-up of the tubing releases the packer
selectively acidizing short intervals of to be moved up to the next perforation.
casing perforations to evenly break Repeat the setting procedure to reset.
down the formation. The span covered When retrieving the packer, retrieve
is determined by the spacing between the spot control valve so that tubing
the two sets of packing elements and fluid can be dumped through the ports
is adjustable to any distance down to between the packing elements to
eighteen inches. prevent pulling a wet string.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
#645 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 55
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
HD Abandonment Packer
The D&L HD Abandonment Packer is Special Features
a heavy-duty version of the popular HD
u Heavy duty mandrels for high
Packer. The packer is set in compression,
load capacity
making it well suited for abandonment
applications. A large internal by-pass u Extra lower slips to distribute
reduces swabbing when running and hanging load
retrieving. The J-slot design allows easy
setting and releasing - 1/4 right-hand
turn sets the packer and straight pickup
releases the packer.
Product Specifications
Casing Recommended Tool OD Tool ID Thread Connection Part
Size Weight Hole Size (inches) (inches)
(inches) (lbs/ft) (inches) Box Up/Pin Down Number
56 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #615
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Abandonment Valve
The D&L Abandonment Valve provides valve case allowing higher rates of Centralizer
a means for temporarily abandoning circulation without damaging the Ring
a well without tripping out a work- valve.
string. The valve is run in conjunction
The Abandonment Valve uses a
with an abandonment packer. The
colleted latch that has a left-hand
Abandonment Valve and Packer are
buttress thread that allows easy
designed to allow heavy loads to
insertion of the latch while providing
hang through them and thus allowing
a strong connection. The colleted
a workstring to hang below during
latch is supported during loading
abandonment. The most common use
to insure the latch threads stay
of the Abandonment Valve and Packer
completely engaged. All external
combination is offshore for storm
threads are locked with set screws
abandonment, but can also be used for
to insure against backing off during
working on BOP’s during drilling without
packer setting.
tripping the drill string out.
Product Specifications
Size Tool OD Thread Connection Part
(inches) (inches) Box Up/Pin Down Number
9-5/8 8.13
10-3/4 9.25
11-3/4 10.25
13-3/8 11.63
14 11.63
Released Latched
#615 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 57
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Tool OD Tool ID Thread Connection Part High Load
Tool Description (inches) (inches) Box Up/Pin Down Number Swivel
High Load Swivel 6.250 3.00 4-1/2 IF 61662
Plug Catcher 6.500 1.75 4-1/2 IF 61663
Plug
Catcher
58 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #616
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Effective Connection
Size Tool Max Pull Tool OD Part
(inches) PSI (max lbs) (inches) Piston Area Top
Bottom Number
2
(in /piston) (Baker E-4)
#05 10,000 31,000 1.718 1.49 1.315 EUE Size 05 39105
#10 10,000 75,000 2.750 3.44 1.900 EUE Size 10 39110-3
#20 10,000 138,000 3.812 7.00 2-3/8 EUE Size 20 39120-3
*Other sizes and connections available upon request
#391 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 59
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Setting Area Tool OD Tool ID Thread Connection Part
Tool (inches) (inches)
Per Cylinder Box Up/Pin Down Number
60 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #974
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Cement Retainer
The D&L Cement Retainer is a drillable Special Features
packer. It is designed to be used for
u Surface controlled valve
remedial cementing operations and
light service applications. It contains a u Allows pressure testing before
sliding valve that can be opened and squeeze
closed with pipe manipulation. All u Valve automatically closes when
components are designed to be drilled the stinger is removed, locking in
with conventional drilling equipment. the squeeze pressure
u Valve protects sensitive zones in
low fluid wells
u Simple conversion to bridge plug
u Mechanical or wireline set
available
u Components rotationally locked
for easy drillout
Product Specifications
Casing Recommended Tool OD Part
Size Weight Hole Size (inches)
(inches) (lbs/ft) (inches) Number Wireline
Set Cement
4-1/2 9.5-15.1 3.826 – 4.090 3.593 84045 Retainer
5-1/2 13-23 4.670 – 5.044 4.315 84055
7 17-35 6.004 – 6.538 5.688 84070
Mechanical
Slip Kit
#840 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 61
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Product Specifications
Casing Recommended Tool OD Part
Size Weight Hole Size (inches)
(inches) (lbs/ft) (inches) Number
62 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #850
Tool Accessories
64 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#509
#512
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
#512 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 65
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Profile Nipple
The D&L Profile Nipples are designed Special Features
to allow common slickline plugs and
u ID profiles made per customer
equipment to be placed successfully
requirements
downhole. API and Premium threads
can be cut on the nipples to reduce u API and Premium threads available
crossovers. Common profile and sizes u “F”, “R”, “DX”, and “DXN” profiles
are available. available
u CRA trim available
Product Specifications
Tubing Size Profile Size Profiles
(inches) (inches) Box X Pin
1.900 1.500 DX DXN
19/8 1.437 F
1.500 F R DX DXN
1.625 F
2.375
1.781 F R
1.812 F R
1.875 F R DX DXN
23/8 1.812 F R
1.875 F R DX DXN
2.130 R
2.875
2.187 F R
2.250 F R
2.312 R DX DXN
7/2 2.250 F
2.312 DX
3.500
2.562 F R
2.750 F R DX DXN
2.812 F R DX DXN
Pin X Pin
*Other sizes and connections available upon request
66 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #511
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Thread Connection Tool OD Part
(inches) Number
Top Bottom
2-3/8 EUE 2-3/8 REG DRILL PIPE 3.500 80120
2-7/8 EUE 2-3/8 REG DRILL PIPE 3.750 80125-BFA
2-7/8 EUE 2-7/8 REG DRILL PIPE 3.750 80125
4 IF 4-1/2 REG DRILL PIPE 6.500 80145
#801 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 67
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Safety Joint -
Shear, Rotational & Swivel Shear
The D&L Safety Joints allow positive release of the tubing string in completions
where retrieval problems are anticipated. These safety joints are available in straight
pull shear release, rotational release, and swivel shear release versions.
#563
68 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #568
#569
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Casing Size Tool OD Thread Connection Part
(inches) (inches) Box Up/Pin Down Number
#597 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 69
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Casing Swivel
70 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10
#830
#480
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Tubing Size Production ID Vent ID Thread Connection
(inches) (inches) (inches) Part Number
Box Up/Pin Down
1.900 NUE
1.900 1.19 0.62 1.900 NUE 67646
w/ 1/4” NPT PORT
∆ Long Sweep Version (allows tools to pass through vent side into tailpipe)
#676 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 71
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Expansion Joints
The D&L Expansion Joints are used to
allow expansion and contraction during
injection or production operations.
They are also used between packers to
allow stroke for setting and releasing
packers and provides for rotation
through the tool. Available with optional
seals for low to high temperatures and in
lengths up to twenty (20) feet.
Special Features
u Pinned (P/N 537xx)
u Splined (Keyed) (P/N 538xx)
u Clutched (P/N 539xx)
u Thermal (P/N 532xx)
- Combinations of two or more
options available in one tool.
Product Specifications
Tubing Size
(inches)
1.900
2-3/8
2-7/8
3-1/2
4-1/2 Splined Thermal, Clutched
& Pinned Splined &
5
Pinned
7
*Other sizes and connections available upon request
#532
#534
72 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #537
#538
#539
To order, call (800) 441-3504
We Know Downhole. or visit www.dlmfg.com
Product Specifications
Recommended Thread Connection Part
Size Tool OD Tool ID
(inches) Hole Size (inches) (inches) Box Up/Pin Down Number
(inches)
2-3/8 3.250 1.000 1.93 2-3/8 EUE 22020
2-7/8 3.750 1.250 2.40 2-7/8 EUE 22027
3-1/2 4.410 1.250 2.90 3-1/2 EUE 22035
4 4.625 1.250 3.45 4” NUE 22040
4-1/2 5.500 1.250 3.97 4-1/2 LTC 22045
5-1/2 6.130 1.250 4.63 5-1/2 LTC 22055
*Other sizes and connections available upon request
#220 Rev 02/10 Made in the U.S.A. D&L Oil Tools Product Catalog 73
To order, call (800) 441-3504
or visit www.dlmfg.com
We Know Downhole.
Type E Valve
The D&L Type E Valve converts Special Features
double-grip mechanical packers like
u Valve locked closed
D&L’s ASI-X Packer into Retrievable
Bridge Plugs. The valve is in the open u Bonded seals
position when running and closed u Equalized before releasing packer
by the rotation required to set the
u Safety interlock when running and
packer. When retrieving, the valve is
retrieving
opened by the rotation required to
release the packer. Safety dogs lock the
tool and valve together during running
and retrieving.
Product Specifications
Casing Size Tool OD Tool ID Thread Connection Part
(inches) (inches) (inches) Box Up/Pin Down Number
74 D&L Oil Tools Product Catalog Made in the U.S.A. Rev 02/10 #124
To order, call (800) 441-3504
or visit www.dlmfg.com