Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1- General input:
Slab Thk t = 200 mm fy = 640 N/mm2
Clear cover = 31 mm fc' = 20 N/mm2
d = 159 mm fy stud= 640 N/mm2
Column Demensions Normal weight concrete λ = 1
𝑏_𝑜= 2036 mm
c1 = 350 mm from RamConcept or CSI SAFE
c2 = 350 mm Parallel to edge for edge column
Position Interior Column
ᵦ 1.00 ACI 11.11.2.1.a
αs 40 ACI 11.11.2.1.b
𝑼𝑺�=�_𝒖/ �_𝒖=
Unreinforced Stress Ratio from RamConcept or CSI SAFE (𝝓�_𝒄 )= 1.422 1.57 MPa
ϕ_𝑠ℎ� 0.75
𝑎� ACI 9.3.2.3 & ACI 9.3.4.a
𝝓�_𝒄=𝒎𝒊𝒏. 𝒐𝒇{■8(𝝓𝟎.𝟏𝟕(𝟏+𝟐/𝜷)𝝀√
( 〖�′〗 _𝒄 )@𝝓𝟎.𝟎𝟖𝟑 ((𝜶_𝒔 𝒅)/𝒃_𝒐 +𝟐) = 1.71 MPa
𝝀√( 〖�′〗 _𝒄 )@𝝓𝟎.𝟑𝟑𝝀√( 〖�′〗 _𝒄 ))}
= 1.43 MPa ACI 318-11, Cl 11.11.2.1
= 1.11 MPa
𝝓�_𝒄
Therefore, == 1.11 MPa Φvc < vu Use Shear reinforcement or drop panel
3- The maximum shear stress resistance provided by Concrete & shear reinforcement:
4- The maximum shear stress resistance provided by Concrete only in case of using shear reinforcement:
𝝓�_(𝒄 𝒘𝒊𝒕𝒉 𝒔𝒉𝒆𝒂𝒓 𝒓𝒇𝒕)={■(𝝓𝟎.𝟏𝟕√(𝒇_𝒄^′ ) 𝑤𝑖𝑡ℎ ��𝑏𝑎� 𝑠ℎ�𝑎� ��𝑖𝑛𝑓𝑜�𝑐�𝑚�𝑛𝑡, 𝐴𝐶𝐼
318−11, 𝐶𝑙 11.11.3.2 @𝝓𝟎.𝟑𝟑√(𝒇_𝒄^′ ) 𝑤𝑖𝑡ℎ 𝑆𝑡��𝑙 𝐼 𝑜� 𝐶 𝑆ℎ�𝑎� ℎ�𝑎𝑑𝑠, 𝐴𝐶𝐼 318−11, 𝐶𝑙 =
11.11.4.8 @𝝓𝟎.𝟐𝟓√(𝒇_𝒄^′ ) 𝑤𝑖𝑡ℎ 𝐻�𝑎𝑑�𝑑 𝑆ℎ�𝑎� 𝑠𝑡𝑢𝑑 "𝑆𝑆𝑅", 𝐴𝐶𝐼 318−11, 𝐶𝑙 11.11.5.1 )}
=
=
c- Determine distance a from sides of column where stirrups or studs may be terminated
𝑏_(𝑜 @ "Cut �_(𝒖 @ "Cut 0.57 MPa
a distance = 746 mm off" ) = 5620mm
of" )=
APPLICABLE
APPLICABLE
APPLICABLE
0.57 MPa
1.11 MPa
0.84 MPa
11, CL 11.11.5.1