Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The course is designed to introduce students to (CAD) software and measuring instrument
to generate the part drawing specification and confirmed according with the standard
drawing requirement. Also carry out the Autodesk Inventor user interface and create 3D
project according to the standard of procedure.
CLO1 Sketch 3D Computer Aided Design (CAD) drawing using part sample and CAD
accessories in accordance with the standard drawing requirement. (P4, PLO2)
CLO2 Interpret part specification of 3D drawing using AutoCAD software in accordance
with the standard drawing requirement. (C3, PLO7)
CLO3 Approve the part drawing specification in accordance with the standard drawing
requirement. (A2, PLO8)
Method of
CLO Method of delivery KPI
assessment
Sketch 3D Computer Aided Practical
Design (CAD) drawing using part Work &
Practical &
CLO1 sample and CAD accessories in Final
Demonstration
accordance with the standard Examination
drawing requirement. (P4, PLO2) (Practical)
Lecture, Tutorial,
Interpret part specification of 3D 50%
Group
drawing using AutoCAD software Quiz & and
CLO2 Work/Discussion &
in accordance with the standard Portfolio above
Student Centered
drawing requirement. (C3, PLO7)
Learning Activities
Practical
Approve the part drawing
Case Study, Project Work &
specification in accordance with
CLO3 & Student Centered Final
the standard drawing
Learning Activities Examination
requirement. (A2, PLO8)
(Practical)
12. Course Synopsis:
This course is designed to introduce students to carry out the 3D Computer Aided Design
(CAD) drawing using part sample, CAD Software, CAD Workstation and measuring
instrument (ruler, caliper, gauge and micrometer) so that the part sample specification is
obtained, part sample is sketched, 3D (CAD) drawing is generated and the part drawing
specification is confirmed in accordance with the standard drawing requirement. Also carry
out the Autodesk Inventor user interface and create 3D project according to the standard of
procedure.
Course Evaluation:
No. Type of Assessment Marks
1 Penilaian Berterusan (Continuous Assessment) 60%
a. Quiz 5%
b. Portfolio 15%
c. Practical Work 1 20%
d. Practical Work 2 20%
2 Peperiksaan Akhir Teori (Final Examination) 0%
3 Peperiksaan Akhir Amali (Practical Examination) 40%
Jumlah (Total) 100%
PLO2 X
PLO7 X
PLO8 X
CLO/PLO PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8 PLO9
Sketch 3D Computer Aided Design (CAD) drawing using part sample
and CAD accessories in accordance with the standard drawing x
requirement. (P4, PLO2)
Interpret part specification of 3D drawing using AutoCAD software in
x
accordance with the standard drawing requirement. (C3, PLO7)
Approve the part drawing specification in accordance with the
x
standard drawing requirement. (A2, PLO8)
17. Content outline of the course and the SLT (lecture hours) per topic:
SLT (Hours)
Formal
Face-To-Face Non Face-To-Face
Assessment Total
Week Content
Theor
Preparation
Indipendent Preparation Final SLT
Tutoria Practica For Continuous
y+ Study/ For Examin
l l Assignments Assessment
SCL Revision Assessment ation
/ Projects
15 Study Week
16 Final Exam (Teori)
17 Final Exam (Amali) 3
Total 28 - 56 31 24 10.5 7.5 3 160
Total SLT 160
Notional Hours 40
Credit Value 4
* Tertakluk kepada Pusat Sumber/ Bengkel Kolej masing-masing dan bertepatan dengan program diploma.