Automatic Sectionalizer (To be completed by Tenderer )
Item No Description 33 K.V
-------- --------------------------------------------- -------- 1 Type of sectionalizer -------- 2 Number of phases ------- 3 Max. continuous current A -------- 4 Rated voltages :- (a) Nominal system voltage KV ------- (b) Highest system voltage KV ------- 5 Rated frequency HZ ------- 6 Method of opening ------- 7 Rated making capacity KA peak ------- (Momentary RMS) 8 Rated Symmetrical interrupting current -------- (Amps RMS) A ------- 9 Short time current ratings -------- (a) 1 sec. Symmetrical KA ------ (b) 10 sec. symmetrical KA ------ (c) Asymmetrical (close and latch RMS) KA -------- 10 Impulse with stand 1.2x50 microsecond wave (Bill) KV ------ 11 dry one minute power frequency with stand KV ------- 12 Wet 10 se c. power frequency with stand KV ----- 13 Creepage distance (1188 mm) mm ------- 14 Type of contacts -------- 15 Static weight of whole sectionalizer equipment Complete with all fittings as in service kg -------- 16 Routine pressure test on sectionalizer tanks or containers KN/m2 ------- 14 Pressure type tests on sectionalizer tank or containers KN/m2 ------- 15 Minimum clearance in air :- (a) Between phases mm --------- (b) Live parts to earth . mm -------- 16 Number of tanks or containers per three phase equipment --------- 20 Material of tank or container --------- 21 Thickness of tank or container:- (a) Walls mm -------- (b) Bottom mm -------- 22 Size of tank or container:- (a) Diameter or rectangular dimensions mm ------- (b) Length mm ------- 23 Material of top plate ------- 24 Thickness of top plate mm ------- 25 Method of attaching top plate to main tank -------- 28 (a) Type ( e.g. post, bushing , etc ) --------- (b) Number of phases per unit --------- (c) Number of secondary winding per unit. ---------- 29 Standard rated out put per phase :- (a) Ratio primary / secondary A --------- 41 (b) Out put VA --------- 30 Standard accuracy classification for protection service --------- 31 Frequency range over above accuracy applies HZ -------- 32 (a) Primary continuous thermal current rating A -------- (b) Rated short-time thermal current rating A -------- (c)Rated short-time dynamic current rating A --------- 33 Dimensions of control module mm ------- 34 Weight of control module kg ------- 35 Connection between module and sectionalizer ------