Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Beveling
cold cutting & Beveling
CARBER’s cold cutting method is the safest means Current Size Range: 0.75
available to cut existing pipe. No sparks or open flames are in. up to 180 in. (19.05mm to
present at any time during the cutting & beveling process 4572mm)
effectively eliminated risk of ignition of contents.
Wall Thickness: Up to 7.5 in.
When utilizing this cutting method, the ID wall of the pipe (190.5 mm)
is only penetrated in the last few seconds of the cutting
process. This greatly reduces exposure of the contents of Pipe Material: All
the pipe to personnel and environment.
Bevel Type: All standard +
Because there is no spark or flame produced, cold cutting custom bevels/landings &
does not require lines to be gas free. In most instances combination bevels
this also eliminates the need to obtain a hot work permit to
simply cut a piece of pipe. Power: Pneumatic or Hydraulic
Cold cutting & beveling is the first step in the CARBER Cut/Isolate/Test System for
a quick and safe tie-in. By bundling these services, there is no need to hire multiple
specialty contractors.
cutting &Testing
coldPlain-End
1 CARBER Service
beveling
▪▪ Can cut out existing welds with minimal (only 1/8 in.)
material loss.
carber.com
carber.com schedule
schedulea aLunch
Lunch&&Learn
Learn 1-800-592-8378
1-800-592-8378
Corporate Headquarters:
12600 N. Featherwood Dr., Suite 450
Houston, TX 77034
800-592-8378
www.carber.com
Certified Lokring
Composite Wraps Cryogenic Services Field Machining
Installation