Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SECOROC MAGNUM SR
AND TC EQUIPMENT
For drifting, tunnelling
and bolting
CONTENTS
Magnum SR22 .........................6
Magnum SR28 .........................8
Magnum SR32 .......................12
Magnum SR35 .......................15
Magnum SR38 .......................21
TC35 ........................................25
TC42 ........................................27
Shank adapters ......................30
SECOROC MAGNUM SR
AND SECOROC TC
– more and straighter holes in a
multitude of underground applications
Since the advent of Secoroc Magnum SR35, More material where it’s needed
Thanks to our unique patented conical
this range of patented conically threaded thread system, we’re confident that
drill systems has expanded with each new rod breakage is a problem you will see
a lot less of. More material at the rod
application. Today, there are five types of end not only strengthens the product,
Magnum SR drill strings available, plus two but also minimizes deviation during
collaring. The result? Straighter holes
new trapezoidal conical drilling strings, TC. and a much longer service life.
4
Secoroc TC42 – The ideal Magnum SR28 & SR32
tunnelling and drifter solution – Bolting specialists
This 57-64 mm diameter system is Replacing conventional R25 and
at home in tunnels. Thanks to the R28 equipment, Magnum SR28 and
selection of extension drill rods, TC42 Magnum SR32 are perfect for rapid
has become a popular choice among rock bolting that covers hole diameters
grouting drillers. of 33 mm to 41 mm. And depending
on the size of bolts used, Magnum
Secoroc TC35 – For cable bolting SR28 and SR32 come with a range of
and production drilling drill bits that match the rock.
With hole diameters from 48-64 mm
the TC35 system is ideal for cable Magnum SR22
bolting and production drilling. – For low seam bolting
When the roof is low, making it
Magnum SR38 – All rounder difficult to drill boltholes by hand,
Magnum SR38 is made for those sites Magnum SR22 is your best bet. Tested
where the TC42 is too large. The most in South Africa, the SR22 combines
popular hole size is 51 mm, within the 22 mm drill steels with short extension
51-54 mm range. Magnum SR38 is rods, from 400mm to 559 mm. The
ideal for tunnelling and drifting work. result is rapid 34-36 mm diameter
boltholes.
Magnum SR35 – Drifter expert
Magnum SR Straight – when
The first of the patented conical
nothing less than straight will do
generation, the Magnum SR35 was
made for blasthole drilling. The There are applications that call for
equipment includes hexagonal 35 mm true precision drilling. And when it
rods in standard drifter and Speedrods comes to drilling straight and parallel
designs, plus round 39 mm standard holes, nothing beats our Magnum SR
drifter and Speedrods, ranging from Straight – with its SR35 round rods (39
3.1 to 6.4 meters in length. SR35 mm diameter) and SR35 guide bit.
drifter bits cover a lot of ground, from
43 mm up to 64 mm, with emphasis on
the 45-51 mm range.
5
Drifting, tunnelling and bolting SR22 (7∕8")
22 mm (7∕8") diameter
19 mm (¾") diameter
Hex. Speedrod
* Tapered rods and tapered button bits can be found in the product catalog for Tophammer.
PMI No. 9851 6544 01.
6
SR22 (7∕8") Drifting, tunnelling and bolting
Tapered drifter rods
SR22 (7∕8") Hex. 22 mm (7∕8") 12°
ØD
Speedrods
SR22 (7∕8") Hex. 22 mm (7∕8") SR22 (7∕8")
ØD
Fully carburized.
Flushing hole diameter 6,7 mm.
7
Drifting, tunnelling and bolting SR28 (11∕8")
* Tapered button bits can be found in the product catalog for Tophammer.
PMI No. 9851 6544 01.
8
SR28 (11∕8") Drifting, tunnelling and bolting
Drill bits
-5033-17 -5xxx-27 -5xxx-37-67 -5xxx-41 Cross-type bit -5076-42-24
33 1 ∕165
90514429 125-7033-44,20-17 10,3 19,5 2 1 0,5
35 13∕8 90516590 125-7035-44,20-17 10,3 19,5 2 1 0,5
DOME BIT - Spherical buttons
9
Drifting, tunnelling and bolting SR28 (11∕8")
Drifter rods
R32 (1¼") Hex. 28 mm (11∕8") SR28 (11∕8")
10
SR28 (11∕8") Drifting, tunnelling and bolting
Speedrods
SR28 (11∕8") Hex. 25 mm (1") SR28 (11∕8")
ØD
Couplings
ØD
11
Drifting, tunnelling and bolting SR32 (1¼")
Reaming equipment
12
SR32 (1¼") Drifting, tunnelling and bolting
Drill bits
Drifter rods
T38 (1½") Hex. 32 mm (1¼") SR32 (1¼")
13
Drifting, tunnelling and bolting SR32 (1¼")
Couplings
ØD
Full bridge -57. Cross-over coupling.
Reaming bits
Pilot adapters
Pilot adapter (with insert), 6° taper angle. Pilot adapter, 12° taper angle.
For 64, 76 and 89 mm reaming button bits. For 89 and 102 mm reaming button bits.
Flushing hole diameter 10,0 mm. Flushing hole diameter 10,0 mm.
14
SR35 (13∕8") Drifting, tunnelling and bolting
Magnum SR35 thread system
Reaming equipment
15
Drifting, tunnelling and bolting SR35 (13∕8")
Drill bits
16
SR35 (13∕8") Drifting, tunnelling and bolting
Drill bits
Diameter Buttons × button diameter (mm) Gauge Flushing hole Weight
No. of
Product No. Product code buttons approx.
mm inch buttons Gauge Centre Side Centre
angle° kg
BUTTON BIT - Spherical buttons
43 111∕16 90513844 128-5043-27,39-20 7 5×9 2×9 35° 2 1 0,7
45 1¾ 90513841 128-5045-39,39-20 9 6×10 3×8 30° 1 3 0,8
48 1 ∕8
7
90514150 128-5048-39,39-20 9 6×11 3×8 35° – 3 0,9
51 2 90514649 128-5051-39,39-20 9 6×11 3×9 35° 1 3 1,0
54 2 ∕8
1
90516638 128-6054-45,39-20 9 6×10 3×9 40° 1 3 1,3
BUTTON BIT - Ballistic buttons
43 111∕16 90515576 128-5043-27-67,39-20 7 5×9 2×9 35° 2 1 0,7
43 111∕16 90516546 128-5043-37-67,39-20 9 6×8 3×8 40° 1 3 0,7
43 111∕16 90516547 128-5043-39-67,39-20 9 6×9 3×8 35° – 3 0,7
45 1¾ 90513839 128-5045-37-67,39-20 9 6×9 3×8 40° 1 3 0,7
45 1¾ 90513846 128-5045-37-30-67,39-20 9 6×9 3×8 40° 1 3 1,0
45 1¾ 90514720 128-5045-39-67,39-20 9 6x10 3x8 35° 1 3 0,8
48 17∕8 90513843 128-5048-37-67,39-20 9 6×10 3×9 40° 1 3 0,8
48 17∕8 90514029 128-5048-37-30-67,39-20 9 6×10 3×8 40° 1 3 1,1
51 2 90514595 128-5051-24-45-67,39-20 11 8×9 3×9 35° 2 1 1,6
51 2 90513842 128-5051-37-67,39-20 9 6×10 3×9 40° 1 3 0,9
54 21∕8 90514220 128-5054-24-45-67,39-20* 11 8×9 3×9 35° 2 1 1,8
54 21∕8 90513871 128-5054-37-67,39-20 9 6×11 3×10 35° 1 3 1,0
54 21∕8 90516569 128-6054-45-67,39-20 9 6×10 3×9 40° 1 3 1,3
64 2½ 90513870 128-5064-67,49-20 12 8×10 4×10 40° – 2 1,6
BUTTON BIT - Full-ballistic buttons (Soft rock bit)
45 1¾ 90514640 128-5045-34-66,39-20 8 6×9 2×9 40° – 2 0,7
Insert
CROSS-TYPE BIT
Width (mm) Height (mm)
48 1 ∕8
7
90513838 128-7048-49,02-16 14,0 25,0 4 1 1,0
* Reversed flushing.
17
Drifting, tunnelling and bolting SR35 (13∕8")
Drifter rods
T38 (1½") Hex. 35 mm (13∕8") SR35 (13/8")
18
SR35 (13∕8") Drifting, tunnelling and bolting
Speedrods
T38 (1½") Hex. 35 mm (1 ") SR35 (13∕8")
ØD
19
Drifting, tunnelling and bolting SR35 (13∕8")
Couplings
ØD
Full bridge -57. Cross-over coupling.
Reaming bits
Pilot adapter
20
SR38 (1½") Drifting, tunnelling and bolting
Magnum SR38 thread system
Reaming equipment
Drill bits
-5054-37 -5102-42-24
21
Drifting, tunnelling and bolting SR38 (1½")
Drifter rods
T38 (1½") Hex. 38 mm (1½") SR38 (1½")
Speedrods
SR38 (1½") Round 39 mm (117∕32") SR38 (1½")
ØD
Couplings
ØD
22
SR38 (1½") Drifting, tunnelling and bolting
Reaming bits
Pilot adapter
23
Drifting, tunnelling and bolting* TC35 (13∕8")
* TC35 is used for cablebolting and production drilling, hole range 48-64 mm.
102 mm dome bit is used for production drilling.
24
TC35 (13∕8") Drifting, tunnelling and bolting*
Drill bits
Speedrods
TC35 (13∕8") Round 39 mm (117∕32") TC35 (13∕8")
ØD
* TC35 is used for cablebolting and production drilling, hole range 48-64 mm.
102 mm dome bit is used for production drilling.
25
Drifting, tunnelling and bolting TC42 (121∕32")
Reaming equipment
Cross-over
coupling T38 Round extension rod* T38
T38 bit
assortment*
T38 Round drifter rod** SR35
SR35 bit
assortment**
* T38 and R32 round extension rods, and T38 and R32 button bits can be found in the product catalog for Tophammer.
PMI No. 9851 6544 01.
** SR35-T38 round drifter rods and SR35 button bits can be found on page 16-18 in this brochure.
26
TC42 (121∕32") Drifting, tunnelling and bolting
Drill bits
-6057-67 -6064-48-45-67
Speedrods
Guide rods
TC42 (121∕32") Round 46 mm (113∕16") TC42 (121∕32")
ØD
27
Drifting, tunnelling and bolting TC42 (121∕32")
Couplings
ØD
Cross-over coupling.
Reaming bits
Pilot adapter
28
Shank adapters Drifting, tunnelling and bolting
Atlas Copco COP 1028
Ø33 55
Bolting, drifting
ØD
Length Dia Weight Flushing
Thread Product No. Product code
(L) mm (D) mm approx. kg tube mm
L
SR28 (11⁄8") 90515870 425-07202,10 400 45 2,7 –
29
Drifting, tunnelling and bolting Shank adapters
Atlas Copco COP 1435
79
Bolting, drifting
8
ØD
Ø3
Atlas Copco COP 1440, COP 1550, COP 1638, COP 1838, COP 2238
Ø54 84,5
Drifting
ØD
Atlas Copco COP 1440, COP 1550, COP 1638, COP 1838, COP 2238
Drifting, production drilling
Ø54 84,5
ØD
30
Shank adapters Drifting, tunnelling and bolting
Atlas Copco COP 1838MUX
Bolting
Ø54 94
ØD
Length Dia Weight Flushing
Thread Product No. Product code
(L) mm (D) mm approx. kg tube mm
L
31
Subjected to alterations without prior notice. © Atlas Copco Secoroc AB. All rights reserved. 2014.04
www.atlascopco.com