Sei sulla pagina 1di 1

7SA522 Data Sheet for setting calculation

Data Description
Name of The Line
A General System and Sub-station Data Value Unit
1 Rated Primary Voltage kV
2 Rated Secondary Voltage V
3 CT Rated Primary Current of protected line A
4 CT Rated Secondary Current of protected line A
5 I4 current transformer is Neutral of
In case of I4 CT is of Parallel line then 5.1 & 5.2 data is reqd A
5.1 CT Rated Primary Current of Parallel line A
5.2 CT Rated Secondary Current of Parallel line A
6 Full scale Voltage kV
7 Full Scale (Load) Current A
8 Minimum operating voltage kV
9 Minimum Short Ckt current for 1ph fault at local end I1 kA
10 Maximum short ckt current for Iph fault from remote end I2 kA
11 Parallel line compenstion reqd
Line Data
11 Positive Sequence Resistance R1 Ohm/Km/phase
12 Positive sequence Reactance X1 Ohm/Km/phase
13 Line Length in KM L Km
14 Zero Sequence Resistance R0 Ohm/Km/phase
15 Zero Sequence Reactance X0 Ohm/Km/phase
16 Mutual Zero Sequence Resistance (If Par 5 is set to parallel line) RoM Ohm/Km/phase
17 Mutual Zero Sequence Reactance (If Par 5 is set to parallel line) Xom Ohm/Km/phase
18 Arc resistance for Ph to Ph faults Rarcpp Ohm prim
19 Arc resistance for Ph to E faults Rarcpe Ohm prim
20 tower footing resistance Rtower Ohm prim
21 Zone 1 Reach Z1 %
22 Zone 2 Reach Z2 %
23 Zone 3 Reach Z3 %
24 Zone 4 Reach Z4 %
25 Zone 5 Reach Z5 %
26 Zone 1B Reach Z1B %
27 Series Compensation No
28 Time setting for zone 2 sec
29 Time setting for zone 3 sec
30 Time setting for zone 4 sec
31 Time setting for zone 5 sec

Potrebbero piacerti anche