Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1000 1000
Rm 800 N/mm2 min Rm 1000 N/mm2 min 900
750 Rp 0,2 640 N/mm2 min Rp 0,2 900 N/mm2 min 750
640 80 % of the tensile strength 90% of the tensile strength
500 500
250 250
0 0
0,2% permanent Linear strain 0,2% permanent Linear strain
strain strain
STEELGRADE C max Cr Ni Mo
CORROSION PROPERTIES
The three most common and most severe types of corrosion in falling Also the Carbon content (C) have influence, especially at elevated tem-
severeness are Pitting, Crevise and General Corrosion. peratures. The seemingly small differences of these alloying elements
The chemical composition of the steel have an important influence on has a great influence on the properties of the steel.
how well it can combat the different types of corrosion. The most impor- A number of laboratory tests have proved that the 316 L Hi Mo
tant elements for this ability are Chromium (Cr), Molybdeunum (Mo) (SS2343) the grade used in BUMAX 88 and BUMAX 109, is superior
and Nitrogen (N). to normal trade standard A4 for all different media and all types of cor-
rosion.
Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering, its agencies and employees, disclaim
any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.
STEEL AND REMAINING YELD STRENGTH IN % OF THAT AT ROOM TEMPERATURE (RT) WORKING
STRENGTH CLASS 100C 200C 300C 400C 500C 600C TEMP. IN AIR
A4-70/80 85 80 75 70 450500
0,5
0,4
0,3
0,2
A4-(316)-80
0,1
BUMAX 88
Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering, its agencies and employees, disclaim
any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.
DESCRIPTION DIMENSION
M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24 M27 M30 M36
DESCRIPTION DIMENSION
STRESS AREA mm 2
5,03 8,78 14,2 20,1 36,6 58 84,3 115 157 192 245 353 459 561 817
M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24 M27 M30 M36
THREAD PITCH mm 0,5 0,7 0,8 1,0 1,25 1,5 1,75 2,0 2,0 2,5 2,5 3,0 3,0 3,5 4,0
STRESS
TABLE 6 AREA mm2 5,03 8,78 14,2 20,1 36,6 58 84,3 115 157 192 245 353 459 561 817
THREAD PITCH mm 0,5 0,7 0,8 1,0 1,25 1,5 1,75 2,0 2,0 2,5 2,5 3,0 3,0 3,5 4,0
TABLE 6
Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering, its agencies and employees, disclaim
any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.
Type symbol
Norm./standard Part number
Number of pcs. Charge number
and dimensions Production lot No
in the box Packing date
APPLICATIONS
Bulten Stainless products are already used today in applications Within the off-shore industry, weight saving is of great importance
where there are demands for high strength, good corrosion properti- and here the high strength technology correctly applied, resulted in
es and high finish for safe assemblies, e.g. pumps and flange con- extremely good weight savings at the same time keeping, or even
nections for high vacuum. Another interesting area is the marine sec- increasing, the safety. The VCF Compact Flange System is a good
tor for power transmission joints where our BUMAX 109 have repla- example on this technology. The new products are also of interest
ced 10.9 steel screws which corroded in the actual environment. for the automotive industry where weight saving and increased safe-
ty are now becoming more important than ever before.
Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering, its agencies and employees, disclaim
any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.