Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
INSTRUCTION TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying T WO marks
m
14092 14092 14092 14092 14092 14092 14092 14092 14092
each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students
have to attempt any FOUR questions.
o
.r c
3. SECTION-C contains T HREE questions carrying T EN marks each and students
14092 14092
have to14092
attempt any 14092 14092
T WO questions. 14092 14092 14092 14092
pe
14092
SECTION-A
14092 14092
o m
14092 14092 14092
a .r c
1) Write briefly :
r p
is meant by 14092
piping on foundation
14092 of a weir?
14092
e
14092 14092 14092
14092 14092
b
b) What do you understand by exit gradient?
14092
c) What are spillways?
14092 14092
a p
14092 14092 14092 14092
b
e) Differentiate between aqueduct and super passage.
14092 14092 14092 14092
14092 14092
f) What is a transition
14092
and what is its
14092
purpose?
14092 14092 14092 14092 14092
14092 1|M
14092 - 5 6 0 4 14092
3 14092 14092 14092 14092 ( S 2 14092
)-2533 14092
4) A river discharges 1000 m3/s of water at high flood level of RL 103.00m. A weir is
constructed for flow diversion with a crest length of 255 m and total length of concrete
14092 14092
floor as14092 14092
40 m. The weir 14092
has to sustain the under 14092 14092
seepage at a maximum 14092
static head of 14092
2.4 m. Determine the depth of d/s cut off. Take silt factor = 1.1, Safe exit gradient = 1/6,
RL of d/s floor = 100.00 m.
m
14092 14092
5) What is14092 14092
a silt excluder? Explain with14092 14092
the help of a neat sketch. 14092 14092 14092
6)
o
In Khoslas method of independent variables, how would you apply corrections for
.r c
thickness and slope of floor?
14092 14092 14092 14092 14092 14092 14092 14092 14092
pe
14092
SECTION-C
14092 14092
o m
14092 14092 14092
.r c
7) a) What is a rigid module? Explain the working of Gibb's rigid module.
p a
b) Define the flexibility and sensitivity of an outlet. Derive a relationship between them.
r e
14092 14092 14092 14092 14092 14092 14092 14092 14092
8) Explain how will you determine the following in design of a siphon aqueduct :
14092 14092
b
14092 14092 14092
a p
a) Waterway of the drain and cross sectional area of the barrel.
14092 14092 14092 14092
rp
b) Head loss through siphon barrel.
c) Uplift pressure due to seepage flow.
14092 14092
9)
14092 14092
b
14092 14092 14092 14092
Design a 1.5 meters sharda type fall for a canal carrying a discharge of 40 cumecs with
the following data :
14092
14092 14092
Bed level U/S
14092 14092
= 105.0 m 14092
14092 14092 14092 14092
14092 2|M
14092 - 5 6 0 4 14092
3 14092 14092 14092 14092 ( S 2 14092
)-2533 14092