Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Intent
October 7, 2016
Program: 15.1388.04
PROGRAM MANAGEMENT
DESIGN
PRODUCTION
INSTALLATION
2016 GNU Group. The physical and intellectual contents of this presentation are copyright protected. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Exterior Branding Interior Branding Location Plans & Message Schedule Package*
Sheet Sign Type(s) Sheet Sign Type(s) Sheet Sign Type(s)
EID.01 Sun Logo on North Elevation IID.01 Gym Lobby Hall of Fame Wall ELP.01 Exterior Signage Overview
EID.01.A Sun Logo Detail IID.02 Gym Lobby Monitor Wall ELP.02 Exterior Signage Location Detail
EID.02 Gymnasium Donor Name Letter Area IID.03 Gym Lobby Trophy Wall ELP.03 Exterior Signage Location Detail
EID.03 Gymnasium Entrance Wall Donor Name Letters IID.04 Gym Lobby Entry Doors Wall ELP.04 Exterior Signage Location Detail
EID.04 Ticket Window Letters at Gymnasium Entrance IID.05 Ticket Window Letters at Gymnasium Lobby ELP.05 Exterior Signage Location Detail
EID.04.A Ticket Window Letters at Aquatic Entrance IID.05.A Ticket Window Flag at Gymnasium Lobby ELP.06 Exterior Signage Location Detail
EID.05 Ticket Window Flag at Gymnasium Entrance IID.06 Gym Court Floor Graphics Provided by Gym Flooring Trade Contractor ELP.07 Exterior Signage Location Detail
EID.06 Building Main Entrance IID.07.A Gym Wall Graphics North Elevation ELP.09 Exterior Signage Location Detail
EID.06.1 Sun Logo Detail on South Elevation IID.07.B Gym Wall Graphics South Elevation ELP.10 Exterior Signage Location Detail
EID.08 Trellis Donor Name IID.09 Sponsor Frames ILP.01 Interior Level 1 Branding
900 Otay Lakes Road
EID.08.A Trellis Donor Name Detail IID.10 Locker Room Entrance IELP.02 Interior Level 1 Signage Location Detail
Chula Vista, CA 91910
EID.08.B Trellis Banner IID.11.A Locker Graphics ILP.03 Interior Level 2 Branding
EID.09 Pool Banner at Bleachers IID.11.B Locker Graphics ILP.04 Interior Level 2 Signage Location Detail DESIGN
EID.10 Pool Wall Graphics Overview Elevations IID.11.C Locker Graphics ILP.05 Interior Level 3 Branding INTENT
EID.10.A Pool Wall Graphics Athletic Banner IID.12 Wellness Feature Wall - Second Floor ILP.06 Interior Level 3 Signage Location Detail Do Not Use As Fabrication Shop
EID.10.B Pool Wall Graphics Athletic Header IID.12.A Wellness Feature Wall - Third Floor
Revisions / Bulletins:
EID.10.C Pool Wall Graphics Building Entry Doors IID.13 Wellness Fitness Reception Wall 8x11 Message Schedules
EID.10.D Pool Wall Graphics Community Lockers IID.14 Wellness Fitness Reception Column
EID.10.E Pool Wall Graphics Therapy Pool IID.15 Wellness Atrium Graphic
EID.11 Pool Sponsor Boards IID.16 Fitness Area Wall - Segment 1&2 Second Floor SEE Bid Document
EID.12 not used IID.16.1 Fitness Area Wall - Segment 3&4 Second Floor
SWCCD Sign Standards* "Exhibit 4.D.5 SWCCD Signage Standards"
Sheet Sign Type(s)
IID.17 Fitness Area Wall - Third Floor
Guidelines Package Introduction
IID.18 Soft Letters Section 1
IID.19 Swim Lockers Community Members Entrance Guidelines Package Fabrication & Installation Instruction
IID.20 Swim Lockers Student Entrance Section 2
15.1388.04 AA
10.07.2016 As Noted
NOTE: Title:
A.01
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
General Permits D. GNU Groups copyrighted electronic files are compatible E. Wallcovering Media; For interior applications, Type
A. It should be noted that the enclosed drawings, as A. The Sign Contractor shall make application for and obtain with Adobe Illustrator 2015. GNU Group makes no 2 Wallcoving is recommended. 3M Scotchcal Digital
provided within this document, should be considered for all permits for the work described herein, as required by representation as to the compatibility of these files with Media, or equivalent, may also be accepatble.
Construction Intent only. It shall be the Sign Contractors governing bodies having jurisdiction. Sign Contractors hardware or software beyond the Regardless, shall meet or exceed all local, state, and
responsibility to ensure suitable methods for producing specified release of the referenced specifications. federal fire codes for Class A compliance. Certified
compliance and Class A listing by Underwriters
superior quality products and installations as intended. The
Laboratories (UL) shall be provided.
Sign Contractor must discuss any deviations from the Submittals E. Data contained on these electronic files are part of GNU
Construction Intent drawings. A. All paper submittals shall be made in 11 x 17 format Groups instruments of service and shall not be used by
F. All fasteners (including anchoring) shall be
(unless otherwise required). See Specification Div. 01 Sign Contractor for any purpose other than as a
stainless steel of a suitable grade for this
B. These enclosed drawings shall be used in coordination convenience in the preparation of shop drawings for the
application. Neither zinc-plated nor galvanized
with Master Architect Construction Document Package B. Provide one complete set of all document submittals for referenced project. Sign Contractor shall, to the fullest
fasteners will be accepted for any application on
(619.557.2500, www.gensler.com/offices/san-diego). review, via mail or electronically. A reviewed set will be extent permitted by law, indemnify and hold GNU Group
this project.
returned to the Sign Contractor after review, with comments harmless against all damages, liabilities or costs, including Program Location:
C. The approximate locations for all items are shown in the and status noted. reasonable attorneys fees and defense costs, arising out of
G. Illumination; Encapsulated LED with exterior
enclosed location plans. Final locations for all components or resulting from Sign Contractors use of these electronic
rating IP67 or better. Color specified herein. Sign
shall be determined in the field prior to installation. A final C. Provide product specification data sheets as required to files.
Contractor is advised to consult LED Manufacters
field walk-through for this purpose shall be scheduled at an clarify product selection and fabrication intent.
Engineer for proper lumen levels and lighting 900 Otay Lakes Road
appropriate time for Sign Contractor and Client. F. These electronic files are not absolute construction
product and demonstrate LED Manufaceters
D. Client reserves the right to request physical prototypes documents. Differences may exist between these electronic Chula Vista, CA 91910
Product Layouts.
as required to clarify the Sign Contractors fabrication files and corresponding hard-copy construction
Scope of Work intent, most specifically regarding product substitutions and documents. GNU Group makes no representation regarding
A. Sign Contractor shall provide all necessary services, deviations from the enclosed Construction Intent Drawings. the accuracy or completeness of the electronic files Sign DESIGN
Warranties INTENT
labor, materials, and products required to fabricate and This may include complete units, with all finishes, applied Contractor receives and does not relieve duties to fully
A. The fabrication and installation of all items
install all items included in these documents, which consist graphics, and illumination. comply with the contract documents, including, and Do Not Use As Fabrication Shop
included in this contract shall be guaranteed for a
of Construction Intent drawings and Location Plans. without limitation, the need to check, confirm and
minimum period of one [1] year from Final
E. Shop drawings; each sign type shall be drawn with all coordinate all dimensions and details, take field
Acceptance by the Owner against defects in Revisions / Bulletins:
B. In the performance of the work, the Sign Contractor shall fabrication techniques clearly specified for review for measurements, verify field conditions and coordinate any
materials or workmanship.
provide required paint and finish samples, shop fabrication correctness with respect to visual performance. Provide work with that of other contractors for the project.
drawings, and sealed Engineering drawings for items noted detailed information for all materials, fasteners and methods
B. Painted or coated finishes shall be guaranteed
as requiring such, as well as complete fabrication and of attachment, all structural details, and all connection G. Because information presented on the electronic files
for a period of five [5] years from Final Acceptance
installation of all items. points. Provide elevations, plans, sections, and notes as can be modified, unintentionally or otherwise, GNU Group
by the Owner against fading, cracking, crazing,
required to clearly convey fabrication intent. must remove all indicia of ownership from each electronic
peeling, blistering, and other defects in materials
C. The Sign Contractor shall provide for review, within 10 display and adjustment of fonts to outline.
or workmanship.
days of award of the contract, a detailed schedule for F. Color submittals; Provide [3] complete sets of all project
completion of all shop drawings, samples, fabrication, colors (paints, inks, and vinyl) on material to be used for
C. All vinyl sheet shall be warranted for a period of
permitting, and installation, indicating all pertinent review of color accuracy. [1] set will be returned to the Sign Materials
five [5] years from Final Acceptance by the Owner
milestone dates. Included in this schedule shall be a Contractor after review, with comments and status noted. A. Concrete; Provide sheet thickness as indicated, in a
for defects in materials or workmanship. Checked by:
minimum of one [1] shop visits by Client to review project structural strength and finish appropriate to this use.
progress. These visits shall be scheduled between 50% and Provide any data necessary to support slip-resistance
D. All warranties noted above shall include all
75% fabrication completion. Artwork requirements for path of travel areas.
required materials and labor to replace defective Approval:
A. The GNU Group will provide typical artwork for all sign
components.
D. Installation shall
may be part of the Sign Contractors Scope of types in Illustrator format, unless Sign Contractor requests B. Aluminum; Provide sheet thickness as indicated, in
Work. Any sub-contracted work will require on-site a specific format. alloys appropriate to this use. Provide extrusions in
Program Number: Drawn By:
supervision by the Sign Contractor on a constant basis. suitable alloys and wall thickness to insure structural
Code Compliance 15.1388.04 AA
B. Manipulation of these formats, generation of similar integrity for all components.
A. These documents are for design intent and shall
E. Upon final acceptance of the work, the Sign Contractor artwork not provided, and production artwork (tool paths,
be used only as a guide to produce the finished Original Issue: Scale:
shall provide a complete service and maintenance silk-screen traps, etc.), shall be the sole responsibility of the C. Stainless Steel; Provide sheet thickness as indicated, in
sizes, appearances and functions shown. 10.07.2016 As Noted
information for all products installed under this contract. Sign Contractor, and will require review prior to fabrication. alloys appropriate to this use. Provide finish as indicated
This information shall include, but not be limited to, and wall thickness to insure structural integrity for all
B. The Sign Contractor shall be responsible to Title:
manufacturer information, contact names and addresses, C. Typography; This document will provide typical components.
meet all 2013 CBC Title 24 code compliance Program Terms
warranty information, product specifications, and routine alphabets for all fonts shown in design intent of signtypes.
specifications for tactile letter spacing, tactile
maintenance recommendations. The purchase and/or manipulation of these typefaces for D. All paint used for the project shall be Matthews Acrylic
letter dimensioning, and braille dimensioning.
production shall be the responsibility of the Sign Contractor. Polyurethane, or approved equal. All finishes to be 20%
gloss.
A.02
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
RESERVED
Intentionally left blank.
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
15.1388.04 AA
10.07.2016 As Noted
Title:
Program Terms
A.03
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Color Palette
DRAWING NOTES:
General Notes:
C1 C2 C3 C4 C5
1. Refer to Southwestern
Community College District
C OLOR M ATCH COLOR MATCH COLOR MATCH COL OR MAT CH COL OR MAT CH Signage Guidelines
Standards for additional
PMS 194c PMS 124c PMS Black 4c Matthews MP32157 White Water PMS 421c information regarding color,
Matthews MP15775 Red Car Line Matthews MP12192 Koehring Yellow Matthews MP 13338 Anodized Black Satin Ultra Low VOC Finish Matthews MP 11938 Toyota Light Grey typeface and iconography
Satin Ultra Low VOC Finish Satin Ultra Low VOC Finish Satin Ultra Low VOC Finish Satin Ultra Low VOC Finish requirements.
C6 C7 C8 C9 C10
2. This document shall superceed
spacing and font restictions
Program Location:
outlined in Southwestern
Community College District
C OLOR M ATCH COLOR MATCH COLOR MATCH COL OR MAT CH COL OR MAT CH Signage Guidelines.
Standards
Matthews MP19894 Stainless Metallic PMS-4505 Vegas Gold Turquoise Bright Red Yellow
Satin Ultra Low VOC Finish Satin Ultra Low VOC Finish 3. Sign Contractor shall submit
equivalent material samples to 900 Otay Lakes Road
Client for color review and Chula Vista, CA 91910
V1 V2 V3 V4 V5 approvals.
DESIGN
V INY L VINYL VI NYL VINYL VINYL INTENT
Surface applied graphic vinyl Surface applied graphic vinyl Surface applied graphic vinyl Surface applied graphic vinyl Surface applied graphic vinyl Do Not Use As Fabrication Shop
3M 7725-23 Red 3M 7725-25 Yellow 3M 7725-22 Matte Black 3M 7725-10 Matte White 3M 7725-31 Medium Grey
Revisions / Bulletins:
V6 V7
V INY L VINYL
Surface applied graphic vinyl Surface applied graphic vinyl
3M 7725-57 Olympic Blue 3M Translucent Gold
Typography
T Y P E FA C E 1 Use for all primary identification names, directional copy, and tactile room signage (ADA compliant).
1 Uni Sans Regular Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
Use for campus names, higher-level campus districts, building numbers, and building level identification. shall be used only as a guide to produce the
2 T Y P E FA C E 2
Uni Sans Semi-Bold finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Color & Typography
familiarity with the site and the conditions it
3 T Y P E FA C E 3 presents. GNU Group must be notified of any Specifications
Handel Gothic variations from the dimensions and
conditions shown on this drawing. Shop
A.04
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
District Standards for Signage Symbols
DRAWING NOTES:
General Notes:
1. Refer to Southwestern
Community College District
Signage Guidelines
Standards for additional
information regarding color,
typeface and iconography
requirements.
DESIGN
PARKING SYMBOLS PRIMARY DISTRICT LOGO INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
V1 V2
x .6x .5x
V4 V3
V7 V6
.66x
V4 V4
ALTERNATE STACKED LOGO
Checked by:
Approval:
PROJECT ARROW These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
1.33x x spacing, tactile letter dimensioning, and 10.07.2016 As Noted
min. braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Iconography
familiarity with the site and the conditions it
.75x
presents. GNU Group must be notified of any Specifications
variations from the dimensions and
conditions shown on this drawing. Shop
A.05
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Athletic & Wellness Brand Applications
DRAWING NOTES:
General Notes:
MASCOT LOGO SPORTS BRAND APPLICATIONS
1. Refer to Southwestern
Community College District
Signage Guidelines
Standards for additional
information regarding color,
typeface and iconography
requirements.
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
AQUATIC COMPLEX CORE LOBBY BRAND FITNESS AREAS braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Athletic & Wellness Brand
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Specifications
variations from the dimensions and
conditions shown on this drawing. Shop
A.06
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
3. It is recommended to connect
signage to the buildings power
management system, if possible.
10'-0"
9'-10"
Sun Logo
Revisions / Bulletins:
See detail EID.01A
1
Anchorage
Hilti chemical anchor
into concrete
Power Supply
Low voltage supply
Checked by:
within fabricated sign shape
By G.C.
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
ENLARGED NORTH ELEVATIO N SECTION VIEW contractor shall be responsible for all
1 Scale: 1/8 = 1-0
2 Scale: 3 = 1-0
structural, electrical, mechanical, foundation
Title:
engineering, for all dimensions and Sun Logo - North Elevation
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
EID.01
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
3. It is recommended to connect
Program Location:
signage to the buildings power
management system, if possible.
Fabricated SUN
5. LED Illumination: 900* nits 900 Otay Lakes Road
Reverse pan channel
*lighting level shall meet Chula Vista, CA 91910
fabricated aluminum logo,
maximum allowable by City
painted to match C2,
Ordinance for building mounting
1'-0 7/8", typ.
Revisions / Bulletins:
Checked by:
Building face
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
ENLARGED NORTH ELEVATIO N SIDE VIEW contractor shall be responsible for all
1 Scale: 1/2 = 1-0
2 Scale: 1/2 = 1-0
structural, electrical, mechanical, foundation
Title:
engineering, for all dimensions and Sun Logo - Detail
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
EID.01(A)
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
2'-11 5/8"
GYMNASIUM SPONSOR TBD.
This sheet diagrams to
recommended position for best
visibilty and pre-existing power
connection. Shown dashed.
Revisions / Bulletins:
ENLARGED EA S T ELEVATION
1 Scale: 3/32 = 1-0
Checked by:
Approval:
Suspended Mount
TBD Signage Contractor
Channel Letter when Donor Name & These documents are for design intent and Program Number: Drawn By:
Custom shape logo/letterforms Logo Shapes have been shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shall use face illumination slected and approved by SWC
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gymnasium Donor
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Name Letter Area
ENLARGED NORTH ELEVATIO N SECTION VIEW variations from the dimensions and
1 Scale: 1/8 = 1-0
2 Scale: 3 = 1-0
conditions shown on this drawing. Shop
EID.02
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
Align
INTENT
Do Not Use As Fabrication Shop
PLACEHOLDER DONOR GYMNASIUM
Revisions / Bulletins:
Letterform, typ.
These documents are for design intent and Program Number: Drawn By:
Fabricated reverse pan channel letter, shall be used only as a guide to produce the
15.1388.04 AA
8"
EID.03
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
5'-11 1/4"
General Notes:
white border
typ. 1/2"
C1
1/2",
1'-0"
C4
Program Location:
Letterforms
Fabricated aluminum reverse pan
FRONT V IEW channel letterforms, painted two colors, PA I N T I N G D I A G R A M
1 Scale: 1 = 1-0 border and returns same color 2 Scale: N.T.S.
900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
Waterproofing?
EQ.
TICKETS
Center the letterforms
within the phenolic panel Letterform, typ.
EQ. 1'-0"
between reveals
Mounting
Stud mount to Exterior walls using
10/24 St./St. all-thread stud,
minimum four (4) per letter Checked by:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
Metal strapping placed behind braille dimensioning. The fabricator/
rainscreen panel, by G.C. contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Ticket Window Letters
familiarity with the site and the conditions it
presents. GNU Group must be notified of any at Gymnasium Entrance
INSTALL ELEVATION S E C T I O N , T Y P.
3 4
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 3/8 = 1-0 Scale: 3 = 1-0
EID.04
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
5'-11 1/4"
General Notes:
white border
typ. 1/2"
C1
1/2",
1'-0"
C4
Program Location:
Letterforms
Fabricated aluminum reverse pan
FRONT V IEW channel letterforms, painted two colors, PA I N T I N G D I A G R A M
1 Scale: 1 = 1-0 border and returns same color 2 Scale: N.T.S.
900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
TICKETS
1'-0"
Mounting
Stud mount to Exterior walls using
10/24 St./St. all-thread stud,
EQ.
EID.04.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
CL Align center letterforms
Wall, by others with center of window
EQ.
TICKETS
1/4"
EQ. 1'-0"
1/4"
3"
1/4"
Center align the flag Program Location:
with the letterforms
TOP VIEW
3 Scale: 3 = 1-0
1 3/8"
cut center circle
2 7/8"
Inner Panel
1/4 thk aluminum,
1 1/2"
10 5/8"
7 1/2"
Checked by:
Armature
1/4 thk aluminum, Approval:
match C5
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
Installation
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
Surface mounted to braille dimensioning. The fabricator/
Metal strapping placed behind wall surface with expansion contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
rainscreen panel, by G.C. sleeve anchors
engineering, for all dimensions and Window Flag
familiarity with the site and the conditions it
presents. GNU Group must be notified of any at Gymnasium Entrance
variations from the dimensions and
conditions shown on this drawing. Shop
SID E VIEW ELEVATOR FL A G FRONT VIEW
1 2
EID.05
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 3 = 1-0 Scale: 3 = 1-0
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
EQ.
1/4"
TICKETS
1'-0"
1/4"
3"
EQ.
1/4"
Program Location:
DESIGN
INTENT
3" 1'-0" Do Not Use As Fabrication Shop
I N S TA L L AT I O N E L E VAT I O N
2 1/4" 7 1/2"
4 Scale: 1/4 = 1-0
Revisions / Bulletins:
Sandwich Panels
Wall, by others 1/4 thk aluminum,
painted all surfaces to
match C1, with router
1 3/8"
cut center circle
2 7/8"
Inner Panel
1/4 thk aluminum,
1 1/2"
10 5/8"
7 1/2"
Approval:
Armature
1/4 thk aluminum,
These documents are for design intent and Program Number: Drawn By:
painted all surfaces to
1 1/2"
EQ.
for specifications for specifications
QTY: One (1) Location
1. Non-illuminated
EQ.
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
EQ. EQ.
Checked by:
SCHOOL OF Approval:
EID.06
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
ENLARGED SOUTH ELEVATIO N
1 Scale: 1/4 = 1-0
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
1. Non-illuminated
Phenolic architectural panels
Reveal, typ.
Logo 3/4"
4'-10" 6"
Fabricated aluminum logo
Spacer
Painted collar C3 DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
6 3/8", typical
4'-10"
Anchorage
Checked by:
Sun Logo As required for sign weight,
Fabricated aluminum shapes, all exposed calculated by sign contrator
surfaces painted to match C2, provide weep
Approval:
holes for adequate drainage
Metal backer strapping, by G.C.
In brady? These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
SUN FRONT VIEW S U N SI D E V I E W SECTION VIEW
1 Scale: 1/2 = 1-0
2 Scale: 1/2 = 1-0
3 Scale: 3 = 1-0
responsible to meet all CBC Title 24 code
compliance specifications for tactile letter
Original Issue: Scale:
EID.06.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
Checked by:
Approval:
EID.07
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Rendering DRAWING NOTES:
Demonstration of recessed
faces on letterforms
General Notes:
Fabricated aluminum with Fabricated aluminum with and junction box(es) on horizontal
recessed face illuminated color recessed face illuminated color members of trellis shall be painted Chula Vista, CA 91910
to match trellis color.
1'-8", typ.
Border and returns painted C4 Border and returns painted C4 Note DESIGN
Aquatic Center name shall match INTENT
Translucent plex and vinyl V7 Translucent plex and vinyl V7 aesthetic and lighting features of
Do Not Use As Fabrication Shop
Field House Stadium canopy.
Review onsite conditions for
additional information. Revisions / Bulletins:
O nl y
Pos i t io n
e For
N am
Checked by:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
10'-0"
10'-0"
EID.08
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
3/4"
2. Sign shall include a photocell
and manual shutoff located on an
area not visible from the ground.
3. It is recommended to connect
Program Location:
signage to the buildings power
management system, if possible.
Checked by:
10
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
2 spacing, tactile letter dimensioning, and 10.07.2016 As Noted
Steel tube frame, by others braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
Metal fascia cap by others engineering, for all dimensions and Trellis Donor Name
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Detail
SEC TIO N V I E W
1 Scale: 3 = 1-0
variations from the dimensions and
conditions shown on this drawing. Shop
EID.08.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
1'-7"
screen printing graphics. Discuss Chula Vista, CA 91910
with Athletic Department prior to
final fabrication.
DESIGN
3'-3"
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Banners Note
Direct print imaged exterior vinyl banners, Sewn pocket shall contain fiberglass
double-faced graphics, clip mounted rod to maintain ridgid bottom shape
to trellis structure. See Sheet X.01
Snaphook Attachment
Corrosion resistant mechanical attachments shall make use Checked by:
of reinforced eyelets sewn into banner hems
Approval:
Trellis Structure
See Architecturals
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
FRONT V IEW SIDE VIEW
1 Scale: 3/4 = 1-0
2 Scale: 3/4 = 1-0
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Trellis Banner
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
EID.08.B
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
1'-11 1/2"
4 square fence post, by others 1. Banner poles shall be attached
to bleacher
fencing system TBD.
Banner Rods
3/4 or 1 diameter rods with flexibity
to accomodate wind loads
Program Location:
A Q UAT I C S
Banner
Sunbrella Canvas banner material, 900 Otay Lakes Road
or equivalent warranty structure
JAGUARS
Revisions / Bulletins:
Sq. Post, typ.
Flexible
banner rod
Checked by:
Approval:
Grommet
and safety cable
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
Banner Collar shown. The sign fabricator shall be
Retainer for bottom of banner responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
Banner bracket braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Pool Banners @ Bleachers
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
FRONT V IEW B R A C K E T D E TA I L
1 2
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 3/4 = 1-0 Scale: 3 = 1-0
EID.09
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
A Q U AT I C S
JAGUARS
Program Location:
DESIGN
INTENT
Revisions / Bulletins:
Checked by:
Fence post by others
(BLEACHER HEIGHT)
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Pool Banners @ Bleachers
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
ELEVATION, TY P.
1
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 3/8 = 1-0
EID.09.1
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Athletic Banner Sponsor Banner Athletic Header Building Entry Doors Community Locker Headers
See Sheet EID.10.A See Sheet EID.11 See Sheet EID.10.B See Sheet EID.10.C See Sheet EID.10.D
Scoreboard
Per Architecturals
Program Location:
LOCKERS LOCKERS
DESIGN
INTENT
Do Not Use As Fabrication Shop
Approval:
15.1388.04 AA
(Re)Build Strength
Increase Endurance
Relieve Stress
Improve Flexibility
Original Issue: Scale:
10.07.2016 As Noted
Boost Coordination
Enhance Mood
Title:
EID.10
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Program Location:
2'-9" 2'-9"
CL CL
Graphic
Screen printed logo graphic 900 Otay Lakes Road
direct to banner surface using
Chula Vista, CA 91910
5"
5"
heat-set thermo-plastic
colorfast inks, CL
2'-4"
1'-6"
2'-4"
1'-6"
color to match C2 DESIGN
Center align copy, typical
INTENT
Do Not Use As Fabrication Shop
Banner
SWIM
3 1/2"
First Lastname
8'-2 1/2"
8'-2 1/2"
Sunbrella 4603 Jockey Red
First Andlast
9'-2"
9'-2"
Content
First Lastname
Surface applied letterforms, First Last
centered on banner panel,
First Lastname
color to match C4
College AD to provide content First Last
for area. Limit to text area First Andlast Checked by:
shown as dashed line.
EID.10.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Probably won't fit
TBD
Revisions / Bulletins:
SCOREBOARD BY OTHERS
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Pool Wall Graphics
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Athletic Header
INSTALLATION ELEVATION V IEW
1
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 1/4 = 1-0
EID.10.B
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
1. Mount to concrete
Program Location:
FRONT V IEW
3 Scale: 1/4 = 1-0 900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
15'-0" INTENT
EQ. EQ. EQ. Do Not Use As Fabrication Shop
Revisions / Bulletins:
Header Panel
Fabricated aluminum cabinet,
painted on face and returns base color
C8, segmented as needed for install
7'-8"
Graphic
Stenciled and painted following artwork provided
by GNU Group. Copy is C4 2 1/2"
Mounting
Attached to concrete wall, centered
Checked by:
between reveals on wall surface
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Pool Wall Graphics
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Building Entry Doors
FRONT V IEW SECTION VIEW
1 2
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 1/4 = 1-0 Scale: 3 = 1-0
EID.10.C
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
2 1/2"
General Notes:
1. Mount to concrete
XRAY to ensure they miss bar?
Installation
Anchor frame into concrete
wall surface with appropriate
anchor bolts and sleeves/epoxy
SECTION VIEW W R A P S C H E M AT I C
EQ.
3 Scale: 3 = 1-0
4 Scale: N.T.S.
900 Otay Lakes Road
Chula Vista, CA 91910
Banner Placement
Shown dashed 3'-3" 3'-3"
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Header Panel
Fabricated aluminum cabinet,
painted on face and returns
base color C8, segmented as
needed for install
9'-7"
9'-7"
EQ.
Checked by:
Approval:
3'-4 3/8"
3'-4 3/8"
Copy
Color C4 These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
4"
4"
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
LOCKERS LOCKERS
braille dimensioning. The fabricator/
7"
7"
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
4"
4"
engineering, for all dimensions and Pool Wall Graphics
familiarity with the site and the conditions it
Layout #1 Layout #2 presents. GNU Group must be notified of any Community Locker Headers
variations from the dimensions and
conditions shown on this drawing. Shop
EID.10.D
drawings and details must be submitted to Sheet:
INSTALL ELEVATION, TYP. G R A P H I C L AY O U T F R O N T V I E W S
1 Scale: 3/8 = 1-0
2 Scale: 1/2 = 1-0
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Frame DRAWING NOTES:
4"
Clear anodized aluminum extrusion
frame, assesmbled to size 1" Gorilla Glue? General Notes:
Corner Key
5 3/4"
For joining miter-cut corners
Mounting
Attached to wall, as required
Program Location:
Wall surface
Revisions / Bulletins:
4 3/4"
(Re)Build Strength
Graphic Panel
Digital printed on flexible digital media
Increase Endurance substrate and clipped into position
Relieve Stress
Alignment
Boost Coordination Panel shall be aligned with all
Program Number: Drawn By:
architectural features, such as reveals. These documents are for design intent and
Make horizontal spacing adjustments, shall be used only as a guide to produce the 15.1388.04 AA
Enhance Mood if necessary finished sizes, appearances and functions
shown. The sign fabricator shall be
Original Issue: Scale:
responsible to meet all CBC Title 24 code
compliance specifications for tactile letter 10.07.2016 As Noted
spacing, tactile letter dimensioning, and
braille dimensioning. The fabricator/
Title:
2'-0"
EID.10.E
Sheet:
Scale: 1/4 = 1-0 drawings and details must be submitted to
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department. 2016 GNU Group. All rights reserved.
011715CIV8
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Horizontal Brace
Clear anodized aluminum extrusion Program Location:
frame, assesmbled to size
MOUNTING SCHEMATIC
2 Scale: 3 = 1-0 900 Otay Lakes Road
Chula Vista, CA 91910
Revisions / Bulletins:
Frame
Clear anodized aluminum extrusion
frame, assesmbled to size
Horizontal Brace
Horizontal brackets recommended
required
for stabilization, and for installation Checked by:
14'-10"
Approval:
EID.10.E.1
Sheet:
Scale: 1/4 = 1-0 drawings and details must be submitted to
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department. 2016 GNU Group. All rights reserved.
011715CIV8
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Frame
Clear anodized aluminum extrusion
frame, assesmbled to size General Notes:
Corner Key
For joining miter-cut corners
Mounting
900 Otay Lakes Road
Attached to wall, as required
Chula Vista, CA 91910
Wall surface
DESIGN
INTENT
FRAME SYSTEM SIDE VIEW
3 Scale: 3/32 = 1-0
Do Not Use As Fabrication Shop
5'-0"
Revisions / Bulletins:
Checked by:
Digital printed on flexible digital media
substrate and clipped into position
Approval:
EID.11
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
* height determined
by alignment with
5'-10"*
DESIGN
INTENT
7'-3 1/2" Inset Display 8'-4 1/2"
Paint niche, per architecturals.
Do Not Use As Fabrication Shop
Layout of framed portraits by others.
Revisions / Bulletins:
FRONT V I E W P R I N T E D WA L L G R A P H I C
3 Scale: 1/4 = 1-0
Checked by:
7"
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
Dimensional Letters Wall, typ. Mounting shown. The sign fabricator shall be
Flat cut-out acrylic letterforms, Letter back is flush on responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
painted C4, satin finish, stud-mounted wall. Use all-thread studs spacing, tactile letter dimensioning, and 10.07.2016 As Noted
flush to wall surface into wall and secured braille dimensioning. The fabricator/
with silicone contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Lobby Graphics:
familiarity with the site and the conditions it
FRONT V I E W SIDE VIEW Hall of Fame Wall
1 Scale: 1 = 1-0
2 Scale: 1 = 1-0
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.01
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Revisions / Bulletins:
FRONT V I E W
3 Scale: 1/4 = 1-0
Checked by:
Approval:
T
LDER TEX
4"
PLACEHO
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
Dimensional Letters Wall, typ. Mounting shown. The sign fabricator shall be
Flat cut-out acrylic letterforms, Letter back is flush on responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
painted C4, satin finish, stud-mounted wall. Use all-thread studs spacing, tactile letter dimensioning, and 10.07.2016 As Noted
flush to wall surface into wall and secured braille dimensioning. The fabricator/
with silicone contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Lobby Graphics:
familiarity with the site and the conditions it
FRONT V I E W SIDE VIEW Monitor Wall
1 Scale: 1 = 1-0
2 Scale: 1 = 1-0
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.02
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
N/A not in signage scope to identify
Soffit Letters Soffit Color
General Notes:
See below specification Wall paint. Architectural finish schedule color
PT-5 SW Custom Yellow (PMS 124c)
CL 1. Refer to architectural finish
Visually center schedule, paint colors PT
with case codes. Verify that they match
what is shown on these sheets.
EQ. EQ.
THE
THE MARK
MARK OF
OF A
A CHAMPION
CHAMPION
Mounting
Letter back is flush on wall.
Use all-thread studs into
wall and secured
with silicone
8'-10"
3/4"
Checked by:
Approval:
6"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
Dimensional Letters Wall, typ. shown. The sign fabricator shall be
Flat cut-out acrylic letterforms, responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
painted C4, satin finish, stud-mounted spacing, tactile letter dimensioning, and 10.07.2016 As Noted
flush to wall surface braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Lobby Graphics:
familiarity with the site and the conditions it
FRONT V IEW SIDE VIEW Trophy Wall
1 Scale: 1 = 1-0
2 Scale: 1 = 1-0
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.03
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Soffit Letters Mural Wall Graphic Flag Sign Lettering Flag Sign
See below specification Commercial grade Type 2 vinyl wallcovering, See Sheet iID.05.A See Sheet iID.05 See Sheet iID.05.A General Notes:
digitally printed with 6 color UV-curing inks Mounted with center of
sign aligned with center 1. G.C. to provide minimum level 4
of letterforms finish and base with Gloss White
14'-8"
for wall surfaces shown as print
graphic applications.
JAGUARS
SNACK BAR TICKETS
3'-4"
Program Location:
6"
10'-6"
900 Otay Lakes Road
8'-7"
8'-7"
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
G Y M ENTRY S EGMENT C O N C E S S I O N WA L L T I C K E T WA L L
Revisions / Bulletins:
(skew )
2. Final imagery used on wall
graphics shall be provided by
SUMM ARY ELEVATION Southwestern College Athletic
1 Scale: 1/4 = 1-0 Department
3/4"
TBD
Checked by:
T
LDER TEX Approval:
PLACEHO
6"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
Dimensional Letters Wall, typ. Mounting shown. The sign fabricator shall be
Flat cut-out acrylic letterforms, Letter back is flush on wall. responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
painted C4, satin finish, stud-mounted Use all-thread studs into wall spacing, tactile letter dimensioning, and 10.07.2016 As Noted
flush to wall surface and secured with silicone braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Lobby Graphics:
familiarity with the site and the conditions it
FRONT V IEW SIDE VIEW Arena Entrance
1 Scale: 1 = 1-0
2 Scale: 1 = 1-0
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.04
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
4'-2 1/2" C1
white border
3/8"
typ.
3/8",
Letterforms
Fabricated aluminum reverse pan C4
8 1/2"
FRONT V IEW PA I N T I N G D I A G R A M
1 Scale: 1 = 1-0
2 Scale: N.T.S.
900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Wall, typ.
Letterform, typ.
Checked by:
Stud Mount
All-thread studs with Approval:
silicone adhesive
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
Letter back flush to wall surface spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Lobby Graphics:
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Tickets
S E C T I O N , T Y P.
4
variations from the dimensions and
conditions shown on this drawing. Shop
Scale: 3 = 1-0
iID.05
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Wall, by others
1. See Sheet iID.04 for installation
Insert Type SB
elevation(s)
Snack Bar
1/4"
1/4"
3"
1/4"
Program Location:
TOP VIEW
3 Scale: 3 = 1-0 LDER TEX
T Insert Type RR
PLACEHO
Restroom
900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
I N S E RT O P T I O N S INTENT
3" 1'-0" 4 Scale: 3 = 1-0 Do Not Use As Fabrication Shop
Sandwich Panels
Wall, by others 1/4 thk aluminum,
painted all surfaces to
match C1, with router
1 3/8"
cut center circle
2 7/8"
Inner Panel
1/4 thk aluminum,
1 1/2"
10 5/8"
7 1/2"
Approval:
Armature
1/4 thk aluminum,
These documents are for design intent and Program Number: Drawn By:
painted all surfaces to
1 1/2"
Insert Type TW Surface mounted to engineering, for all dimensions and Interior Window Flags
wall surface with expansion familiarity with the site and the conditions it
Ticket Window presents. GNU Group must be notified of any at Gymnasium Lobby
sleeve anchors variations from the dimensions and
conditions shown on this drawing. Shop
SID E VIEW ELEVATOR FL A G FRONT VIEW
1 2
iID.05.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 3 = 1-0 Scale: 3 = 1-0
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Approval:
These documents are for design intent and Program Number: Drawn By:
Baseline Lettering shall be used only as a guide to produce the
15.1388.04 AA
finished sizes, appearances and functions
Color to match C4
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Floor Graphics
familiarity with the site and the conditions it
Gymnasium Lobby presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
FRONT V IEW
iID.06
drawings and details must be submitted to Sheet:
1 Scale: N.T.S.
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
JAGUARS
JAGUARS
58
SARDINES
40 sponsor sponsor sponsor Program Location:
WELCOME TO THE DEN
sponsor sponsor
sponsor
Relay 01
Relay 02
Relay 03 00:00
Relay 01
Relay 02
Relay 03 sponsor
board board board
Relay 04 Relay 04
Relay 05 Relay 05
Checked by:
JAGUARS SARDINES
58 40 Approval:
SOUTHWESTERN COLLEGE
sponsor sponsor
Relay 01 Relay 01
00:00
Relay 02 Relay 02
sponsor
Relay 03 Relay 03 sponsor
Relay 04 Relay 04
Relay 05 Relay 05
15.1388.04 AA
GO
JAGS
Original Issue: Scale:
10.07.2016 As Noted
Title:
GYM WAL L NORTH G Y M WA L L E A S T Gymnasium Graphics:
1 Scale: N.T.S.
2 Scale: N.T.S. Wall Overview
iID.07
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
155'-11"
JAGUARS
must be properly prepared as
WELCOME TO THE DEN
6'-0"
recommended by the
manufacterer. It is recommended
that only a certified installer
1'-4"
should
shall bebe applied
applied forfor additional
additional DESIGN
protection and product lifespan. INTENT
Wall Padding
Do Not Use As Fabrication Shop
Stock color Red as closest match. 5. Padding vendor may supply
Refer to architecturals for specs safety equipment with graphics
printed in-house. Verify with G.C. Revisions / Bulletins:
Sponsors
See architecturals for specification
Checked by:
Approval:
JAGUARS
JAGUARS SARDINES
58 40
WELCOME TO THE DEN
sponsor sponsor
Relay 01 Relay 01
00:00
Relay 02 Relay 02
sponsor
Relay 03 Relay 03 sponsor
Relay 04 Relay 04
Relay 05 Relay 05
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
GO compliance specifications for tactile letter
10.07.2016 As Noted
JAGS spacing, tactile letter dimensioning, and
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gymnasium Graphics:
157'-0", typ. familiarity with the site and the conditions it
presents. GNU Group must be notified of any North Wall
variations from the dimensions and
conditions shown on this drawing. Shop
ELEVATION NORTH
1
iID.07.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 1/16 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
155'-11"
General Notes:
8 1/4"
manufacterer. It is recommended
that only a certified installer
1'-4"
Checked by:
JAGUARS SARDINES
Approval:
58 40
SOUTHWESTERN COLLEGE
sponsor sponsor
Relay 01 Relay 01
00:00
Relay 02 Relay 02
sponsor
Relay 03 Relay 03 sponsor
Relay 04 Relay 04
Relay 05 Relay 05
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
GO compliance specifications for tactile letter
10.07.2016 As Noted
JAGS spacing, tactile letter dimensioning, and
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gymnasium Graphics:
157'-0", typ. familiarity with the site and the conditions it
presents. GNU Group must be notified of any South Wall
variations from the dimensions and
conditions shown on this drawing. Shop
ELEVATION S OUTH
1
iID.07.B
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 1/16 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
6'-5" DRAWING NOTES:
General Notes:
Corner Key
5 3/4"
For joining miter-cut corners
Revisions / Bulletins:
CL CL
5'-0"
5'-0"
Checked by:
Approval:
General Notes:
7'-0"
1. Signage is non-illuminated.
Frame
4"
Clear anodized aluminum extrusion 2. Select placeholder graphic until
frame, assesmbled to size 1" sponsor artwork is secured.
direct to 3M flexible graphic substrate, or equivalent, substrate and clipped into position
stretched taught within bleed-edge extruded frame system Program Location:
Corner Key
5 3/4"
For joining miter-cut corners
Mounting
Attached to wall, as required
900 Otay Lakes Road
Wall surface Chula Vista, CA 91910
Revisions / Bulletins:
Sponsor Frames
Printed canvas stretched with frame system
117'-0"
CL CL CL Checked by:
2'-3"
2'-3"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
Center align Center align Center align finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
over stairs over middle bleacher over stairs
responsible to meet all CBC Title 24 code Original Issue: Scale:
seating segment compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Gym Wall Graphics:
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Sponsor Frames
variations from the dimensions and
conditions shown on this drawing. Shop
ARENA WALL : WES T ELEVAT I O N
1
iID.09
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 3/32 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
JAGUAR ATHLETICS
7" 10 1/4"
Checked by:
regulatory signage
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
Womens Locker Rooms Waterfountains Mens Locker Rooms compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
E LEVATION C ORRIDOR 1 0 9
engineering, for all dimensions and Locker Room Entrance
1 Scale: 1/4 = 1-0
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.10
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
EQ. EQ. Prepared By:
DRAWING NOTES:
N/A not in signage scope to identify
I DON'T WANT TO BE BETTER THAN YOU, OR HER, OR HIM General Notes:
Red Color on Walls
I WANT TO BE BETTER THAN I AM RIGHT NOW
KERRI WALSH Color shown on walls by others
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
16'-5"
Approval:
4"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
2 finished sizes, appearances and functions 15.1388.04 AA
1'-2 1/4"
__
2 1/2"
shown. The sign fabricator shall be
5 3
responsible to meet all CBC Title 24 code Original Issue: Scale:
4 compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Wall Graphic Wall Graphic structural, electrical, mechanical, foundation
Title:
Applied 3M Vinyl, color V4 Applied 3M Vinyl, color V2 engineering, for all dimensions and Locker Graphics
3M adhesion test required 3M adhesion test required familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
FRONT VIEW G R A P H I C L AY O U T
1 6
iID.11.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 1/4 = 1-0 Scale: N.T.S. with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
21'-10 1/2" Prepared By:
DRAWING NOTES:
1'-2"
ALIGN
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
6 3/4" 4"
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
2 shown. The sign fabricator shall be
5 1/4"
5 __ 3 responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
4 10.07.2016 As Noted
2 1/4"
spacing, tactile letter dimensioning, and
braille dimensioning. The fabricator/
contractor shall be responsible for all
Wall Graphic Wall Graphic structural, electrical, mechanical, foundation
Title:
Applied 3M Vinyl, color V4 Applied 3M Vinyl, color V2 engineering, for all dimensions and Locker Graphics
3M adhesion test required 3M adhesion test required familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
FRONT VIEW D E TA I L
1 6
iID.11.B
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: 1/4 = 1-0 Scale: 1/2 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
EQ. EQ. Prepared By:
DRAWING NOTES:
THERES ONLY ONE THING WE CAN CONTROL,
AND THAT IS HOW HARD WE PLAY General Notes:
DON MEYER
10"
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
12'-6"
Approval:
These documents are for design intent and Program Number: Drawn By:
4"
2 shall be used only as a guide to produce the
5 __ 3 15.1388.04 AA
7"
finished sizes, appearances and functions
shown. The sign fabricator shall be
4
4 3/4"
2 1/4"
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Wall Graphic Wall Graphic structural, electrical, mechanical, foundation
Title:
Applied 3M Vinyl, color V4 Applied 3M Vinyl, color V2 engineering, for all dimensions and Locker Graphics
3M adhesion test required 3M adhesion test required familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
FRONT VIEW G R A P H I C L AY O U T
1 6
iID.11.C
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: N.T.S. Scale: N.T.S. with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
INTENT
Do Not Use As Fabrication Shop
4 5/8"
Revisions / Bulletins:
7'-2 1/8"
Checked by:
Approval:
20'-0"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
FRONT VIEW
1 Scale: 3/8 = 1-0
spacing, tactile letter dimensioning, and
braille dimensioning. The fabricator/
10.07.2016 As Noted
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Wellness Feature Wall
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Second Floor
variations from the dimensions and
conditions shown on this drawing. Shop
iID.12
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
4 3/4"
5'-6"
Checked by:
Approval:
20'-0"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
FRONT VIEW
1 Scale: 3/8 = 1-0
responsible to meet all CBC Title 24 code
compliance specifications for tactile letter
Original Issue: Scale:
iID.12.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Mural Wall Graphic
Commercial grade Type 2 vinyl wallcovering, General Notes:
digitally printed with 6 color UV-curing inks
1. For custom shapes cut from
acrylic, all sides and edges shall
be sanded and free from cutting
tool marks.
Letterforms
FI
T
CE NE S 1/2 thick flat-cut out acrylic, painted C2, 2. Digital wallcovering media shall
NT S meet or exceed all local, state, and
ER 3M VHB 5952 tape mounted flush to
wall surface federal fire codes for Class A
compliance. Certified compliance
Program Location:
and Class A listing by
Underwriters Laboratories shall
be provided.
5"
DESIGN
ISO VIEW
2 Scale: N.T.S.
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
FITNESS
7 1/4" 4 1/4"
CENTER
Checked by:
10'-3"
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
5'-3"
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Wellness Fitness Reception
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
iID.13
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
FRONT VIEW
1 Scale: 1/2 = 1-0
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
Graphic
See iID.13
General Notes:
10'-0"
digitally printed with
B 6 color UV-curing inks
A
900 Otay Lakes Road
Chula Vista, CA 91910
A B C D DESIGN
INTENT
Do Not Use As Fabrication Shop
ISO VIEW EXPLODED VIEW
2 Scale: N.T.S.
3 Scale: 1/4 = 1-0
Revisions / Bulletins:
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Wellness Fitness Column
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
FRONT VIEW variations from the dimensions and
1 Scale: 1/4 = 1-0
conditions shown on this drawing. Shop
iID.14
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Program Location:
FITNESS ROOMS 24
7 1/2"
12'-0"
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
FITNESS
CENTER Program Number: Drawn By:
15.1388.04 AA
10.07.2016 As Noted
Title:
FRONT VIEW
1 Scale: 1/4 = 1-0
iID.15
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
18'-11 3/8"
1617-2021R Exhibit 4.D.6 WAC Const. Intent
3 18'-5 /4"
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
Segment 1 Segment 2 Segment 3 Segment 4 braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Fitness Area Wall
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Segment 1 & 2
variations from the dimensions and
conditions shown on this drawing. Shop
Second Floor
iID.16
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
OVERALL GRA P HIC ELEVATION & P L A N V I E WS
1
with fabrication. All copy shall be proofread
by client andany legal requirements checked
Scale: N.T.S. by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
45'-10" Prepared By:
DRAWING NOTES:
General Notes:
SCHOOL OF WELLNESS, EXERCISE SCIENCE, AND ATHLETICS
1. Digital wallcovering media shall
meet or exceed all local, state, and
federal fire codes for Class A
compliance. Certified compliance
and Class A listing by
Underwriters Laboratories shall
be provided.
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
Segment 1 Segment 2 Segment 3 Segment 4 spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Fitness Area Wall
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Segment 3 & 4
variations from the dimensions and
conditions shown on this drawing. Shop
Second Floor
iID.16.1
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
OVERALL GRA P HIC ELEVATION & P L A N V I E WS
1
with fabrication. All copy shall be proofread
by client andany legal requirements checked
Scale: N.T.S. by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
13'-5 1/4" DRAWING NOTES:
?
R
General Notes:
NOTE:
MATCHLINE
IO
All lockers and walls above and below are painted
1. Digital wallcovering media shall
color per architectural finish schedule
meet or exceed all local, state, and
federal fire codes for Class A
D
compliance. Certified compliance
and Class A listing by
9'-0"
R
Mural Wall Graphic Underwriters Laboratories shall
Commercial grade Type 2 vinyl wallcovering, be provided.
O
digitally printed with 6 color UV-curing inks
Program Location:
O
C
FRONT VIEW 900 Otay Lakes Road
3
?
Scale: 1/4 = 1-0 Chula Vista, CA 91910
3'-4"
M
13'-0" 11'-6" 11'-3"
DESIGN
O
INTENT
MATCHLINE
O
Do Not Use As Fabrication Shop
R
Revisions / Bulletins:
10'-0"
??
IS
TH
Checked by:
FRONT VIEW
2
IS
These documents are for design intent and Program Number: Drawn By:
ER
This is an eyebrow.. not a flat wall shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be responsible
to meet all CBC Title 24 code compliance Original Issue: Scale:
specifications for tactile letter spacing, tactile
10.07.2016 As Noted
H
iID.17
approval prior to proceeding with fabrication. Sheet:
All copy shall be proofread by client andany
legal requirements checked by clients legal
department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Dimensional Letters
1/2 thick acrylic letterforms,
CL faces and edges painted color C4,
3M VHB 5952 tape mounted flush to wall surface
Program Location:
4'-3"
4"
STUDENT LOCKERS
6 3/4"
DESIGN
INTENT
Do Not Use As Fabrication Shop
FRONT VIEW
2 Scale: 3/4 = 1-0
Revisions / Bulletins:
Checked by:
Approval:
iID.18
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Mural Wall Graphic Letterforms Title 24 signage
Commercial grade type 2 vinyl 1/2 thick flat-cut out acrylic, painted C2, 1. For custom shapes cut from
wallcovering, digitally printed with VHB tape mounted to wall surface acrylic, all sides and edges shall
6 color UV-curing inks be sanded and free from cutting
tool marks.
2'-6" 2'-6"
900 Otay Lakes Road
Chula Vista, CA 91910
Womens Mens
DESIGN
8'-0"
INTENT
5'-0"
5'-0"
5'-0"
5'-0"
Do Not Use As Fabrication Shop
Revisions / Bulletins:
5'-0" 5'-0"
Checked by:
Approval:
2 4
Program Number: Drawn By:
3 5 These documents are for design intent and
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Swim Lockers Entrance
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Second Floor
COM MUNITY MEMBERSHIP ENTRA N C E S variations from the dimensions and
1 Scale: 1/4 = 1-0
conditions shown on this drawing. Shop
iID.19
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
A B C A B C
2A 2B 2C 3A 3B 3C
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
women entry men entry engineering, for all dimensions and Swim Lockers Entrance
familiarity with the site and the conditions it
presents. GNU Group must be notified of any Second Floor
STUDENT ENTRA NCES variations from the dimensions and
1 Scale: 1/4 = 1-0
conditions shown on this drawing. Shop
iID.20
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent 1'-6"
Prepared By:
DRAWING NOTES:
General Notes:
Poster Lens Wall
1. Printed material and content
2 1/2" 2 1/2"
created and provided by SWC.
Barrel
2. Quantity and placement may
Anchorage based on installation vary. Consult SWC for final
location wall type. Use concrete locations.
anchors where needed.
2'-0"
Program Location:
Adjustable Grip
Revisions / Bulletins:
Checked by:
3'-0"
Approval:
CL
Poster Holder
These documents are for design intent and Program Number: Drawn By:
Adjustable edge-grip barrel holders, shall be used only as a guide to produce the
18x24 15.1388.04 AA
24x36 color to match architectural finished sizes, appearances and functions
window framing shown. The sign fabricator shall be
5'-0"
iID.21
drawings and details must be submitted to Sheet:
INSTALLATION ELEVATION, TY P. P O S T E R E L E VAT I O N , 2 4 x 3 6
1 2
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
Scale: 1/4 = 1-0 Scale: 1 1/2 = 1-0 by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
QUOTE LINE ONE,
QUOTATION LINE TWO
CITATION LINE General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
6 3/4" 4"
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
2 15.1388.04 AA
5 1/4"
finished sizes, appearances and functions
5 __ 3 shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
4
2 1/4"
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
Wall Graphic Wall Graphic
contractor shall be responsible for all
Applied 3M Vinyl, color V4 Applied 3M Vinyl, color V2 structural, electrical, mechanical, foundation
Title:
3M adhesion test required 3M adhesion test required engineering, for all dimensions and Locker Graphics
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW G R A P H I C L AY O U T
1 6
iID.22
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: N.T.S. Scale: 1/2 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
6 3/4" 4"
5 __ 3 These documents are for design intent and Program Number: Drawn By:
4 shall be used only as a guide to produce the
15.1388.04 AA
5 1/4"
finished sizes, appearances and functions
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
2 1/4"
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
Wall Graphic Wall Graphic
contractor shall be responsible for all
Applied 3M Vinyl, color V4 Applied 3M Vinyl, color V2 structural, electrical, mechanical, foundation
Title:
3M adhesion test required 3M adhesion test required engineering, for all dimensions and Locker Graphics
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW G R A P H I C L AY O U T
1 6
iID.22.A
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
Scale: N.T.S. Scale: 1/2 = 1-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
25'-8 3/8" 17'-3 5/8"
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
POOL
5"
5'-0"
5'-0"
1'-6"
Checked by:
< To Pool Deck Private Shower Private Shower
Approval:
CORRDIOR 225 NORTH ELE VAT I O N
1 Scale: 1/4 = 1-0
Mural Wall Graphic
Commercial grade type 2 vinyl wallcovering,
Program Number: Drawn By:
digitally printed with 6 color UV-curing inks
15.1388.04 AA
10.07.2016 As Noted
Title:
iID.23
Sheet:
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
October 7, 2016
Program: 15.1388.04
PROGRAM MANAGEMENT
DESIGN
PRODUCTION
INSTALLATION
2016 GNU Group. The physical and intellectual contents of this presentation are copyright protected. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Program Location:
ELP.08
024
025
ID.09
E.ID.09
ELP.07 DESIGN
027
E.ID.09
INTENT
023 022 019 ELP.06
DI.10 RG.02 ID.01 Do Not Use As Fabrication Shop
039
E.ID.10E
Revisions / Bulletins:
028
E.ID.09
ELP.10 029
E.ID.09 038
E.ID.10A
018
037 DI.07
E.ID.10B
031
034 016 Checked by:
E.ID.09
E.ID.10D E.ID.02
ELP.05
033 015
032
E.ID.10D DI.10 Approval:
E.ID.09
001
E.ID.08 014
E.ID.05
002 These documents are for design intent and Program Number: Drawn By:
013
E.ID.08A shall be used only as a guide to produce the
003
E.ID.04
finished sizes, appearances and functions 15.1388.01 KS
E.ID.04A 004 012 shown. The sign fabricator shall be
E.ID.05A DI.10 responsible to meet all CBC Title 24 code Original Issue: Scale:
005 compliance specifications for tactile letter
DI.03 ELP.04
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
008
011 engineering, for all dimensions and Exterior All Levels
DI.06 familiarity with the site and the conditions it
E.ID.07 presents. GNU Group must be notified of any Sign Location Plan
006 007 009 010 variations from the dimensions and
ELP.02 ELP.03 conditions shown on this drawing. Shop
DI.10 E.ID.06 E.ID.03 DI.10
ELP.01
drawings and details must be submitted to Sheet:
GNU Group for approval prior to proceeding
with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
050212CIV6
2013 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
001
E.ID.08
002
E.ID.08A 003
E.ID.04A
004 900 Otay Lakes Road
E.ID.05A
Chula Vista, CA 91910
DESIGN
6'-6"
INTENT
Do Not Use As Fabrication Shop
6"
005
DI.03 Revisions / Bulletins:
1'-2"
Checked by:
1'-2"
006
DI.10
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.02
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
007 008
E.ID.06 E.ID.07
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.03
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
9'-6"
011
DI.06
Checked by:
1'-2" 1'-7"
010 Approval:
1'-2"
DI.10
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.04
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
3'-6"
900 Otay Lakes Road
1'-2"
015 Chula Vista, CA 91910
DI.10
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
014
E.ID.05
6"
012
DI.10
4'-8"
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.05
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
019
ID.01
6"
018
DI.07
1'-2"
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
3'-10"
1'-2"
ELP.06
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
12'-10"
021
DI.03 Checked by:
1'-2"
Approval:
020
E.ID.01
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.07
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
H
ST
RE
ET
900 Otay Lakes Road
Chula Vista, CA 91910
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
"
-0
5'
024
ID.09
6'-8"
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.08
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
"
-0
5'
Revisions / Bulletins:
024.A
DI.02
Checked by:
Approval:
These documents are for design intent and Program Number: Drawn By:
shall be used only as a guide to produce the
finished sizes, appearances and functions 15.1388.04 AA
shown. The sign fabricator shall be
responsible to meet all CBC Title 24 code Original Issue: Scale:
compliance specifications for tactile letter
spacing, tactile letter dimensioning, and 10.07.2016 As Noted
braille dimensioning. The fabricator/
contractor shall be responsible for all
Title:
structural, electrical, mechanical, foundation
engineering, for all dimensions and Exterior Location Plan
familiarity with the site and the conditions it
presents. GNU Group must be notified of any
variations from the dimensions and
conditions shown on this drawing. Shop
PLAN VIEW
ELP.09
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
DRAWING NOTES:
General Notes:
Program Location:
038
E.ID.10A
037
E.ID.10B
036
E.ID.10A
035
E.ID.10C
034
E.ID.10D
033
E.ID.10D
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
Approval:
ELP.10
drawings and details must be submitted to
1
Sheet:
GNU Group for approval prior to proceeding
Scale: 1 = 20-0 with fabrication. All copy shall be proofread
by client andany legal requirements checked
by clients legal department.
011715CIV8
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
UP
UP
RI
RI
RI
RI
FEC
RI RI Program Location:
RI
RI
FEC FEC
RI RW RD EP E E EP E
E EP E
008
RI
FEC
RI
iID.07B DESIGN
RI RI
INTENT
004 015 Do Not Use As Fabrication Shop
009 iID.08
iID.09 iID.06
RW
RI RD Revisions / Bulletins:
010
iID.06
RI
001 RD
iID.11C RW
005 011
iID.09 iID.06
RI RD
ER RW
006
iID.10
ER FEC RW
RD
RI RI 012
iID.06
Checked by:
002
iID.11B 003 007 013 016
iID.11A iID.09 iID.06 iID.08
RI ER CS Approval:
ER EP RI RI RI
TL RI
SL
014 CS
U
UP
P EP
iID.07A ER EP RCS
FEC FEC
Program Number: Drawn By:
UP
UP
017 E TL 15.1388.01 KS
iID.04 SL TL
018 RI
Original Issue: Scale:
iID.01 ALS
019
iID.05A 021
RI ALS ISA 10.07.2016 As Noted
RD RW
E
020 iID.05 022
RW RI
RD RI RD FEC RW iID.05 iID.05A Title:
Level 1 Branding
023
iID.03
E
Sign Location Plan
E ISA
024
iID.02 EP
ISA N
ILP.01
Sheet:
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
EUD UP
UP
RI
FEC
001
iID.22A
RW
E RI ER
RD
RW
ER
RD
EP
002
FEC iID.20
RI Program Location:
003
iID.20
RD
RD E RW
RI ER
RW
004
iID.22A 900 Otay Lakes Road
Chula Vista, CA 91910
RW
RD
FEC
E RI
RD RW
005
RW RD
ER
DESIGN
RD
iID.23 INTENT
RW
Do Not Use As Fabrication Shop
Revisions / Bulletins:
ER
E
RD EP
FEC
RW
RW
006
iID.19
RI
RI
007
iID.19
RD RW
RW E
EP Checked by:
ER
ER
Approval:
EP
RI RI RI RI TL RW
U
UP
P SL EP RD RI Program Number: Drawn By:
FEC
RI
15.1388.01 KS
FEC
E EP FEC RI UP
UP
E E E E EP RCS
EP 010 008 009 RCS 013 TL
iID.16 iID.12 iID.18 iID.16 SL
ER
RD FEC Original Issue: Scale:
RI RI EUD EP
RW
RI
10.07.2016 As Noted
FEC
FEC
RI
FEC
011
RI
iID.14 Title:
RD ER
RW
012
Level 2 Branding
RI E U
UP
P
iID.13 Sign Location Plan
ER RI RI RI ER
EP RI
E E
N
ILP.02
E
RI RI
Sheet:
UP
UP
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
RI Approval:
RI
RI
RI
RI RW 10.07.2016 As Noted
FEC RD
ER
EUD
RI EP EUD RI RI RI
EP Title:
TL
002
SL TL SL U
UP
P
iID.15 Level 3 Branding
RI RI
Sign Location Plan
UP
UP
FEC
N
ILP.03
Sheet:
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
UP
UP
RI
001
RM.06
RI
002
003 RM.13
RM.06
RI
004
005 RM.13
008 009 RM.06
006
RM.06 RM.06 RI
007 RM.13
FEC
RM.06 Program Location:
RI RI 011
RI
012 RM.06
IN.04
RI
014
RM.06
020
RM.09
015
RM.06
900 Otay Lakes Road
RI
022
021
RM.08
017 Chula Vista, CA 91910
RM.06
ISA RM.12
FEC FEC
RI RW RD 019 EP E018 028 029 EP 030 032
E 033
EP 035
E
E E
IN.05 RI RM.07
023
RI
RM.05
FEC
RM.07 RM.10 RM.07
031
RM.07 RM.10 RM.07
034
DESIGN
027
RI 025 026
RM.10 RM.06
RI
RM.06
IN.05 IN.05 INTENT
024 010 Do Not Use As Fabrication Shop
RM.06 DR.01
037
RM.09
036 RW
RI
RM.06 038 RD Revisions / Bulletins:
RM.08
RI
039
RM.06
040
RM.08
RD
041 RW
042 RM.09
RM.06 044
RM.09
RI RD
043 045
ER RW
RM.07 RM.08
046
DR.01
051 050ER FEC RW
047 048
RM.06 RM.07 RD
RM.08 RM.10
RI RI
052 049
RM.06 RM.09
Checked by:
064 060
053 IN.05 RM.07 065 068
RM.06 055 RM.12 RM.12
RI
RM.07 ER CS
066 069 Approval:
ER EP RI RI RI 061 070
RM.12 RM.12 RM.07
056 RM.06
TL RI
067 071 097
IN.10 SL CS
RM.07
U
UP
P EP
IN.07 IN.05
ER EP RCS
FEC FEC 096
IN.10 Program Number: Drawn By:
057 058 059 062 063
095
UP
UP
094
IN.06 RM.06 RM.06 IN.05 DI.09
IN.06
E
SL TL
TL
RM.07 15.1388.01 KS
064
RM.10 072 079 RI
RM.08 RM.06 089 090 Original Issue: Scale:
IN.02 RG.04 ALS 092 093
073 RG.04 IN.02
RM.09 RI
088 ALS ISA 10.07.2016 As Noted
074 RD RW 091
RM.08 080 RM.06
E
RW RI
RM.10 087 RM.12
075 RD RI RD FEC RW RM.07 Title:
081
RM.09
076 RM.10 085
RM.07
Level 1
RM.06
077
083 E
Sign Location Plan
RM.07
RM.09 082 E ISA
086
078 IN.05
RM.08
EP
ISA RM.12 N
ILP.04
084 Sheet:
RM.12
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
001 EUD UP
UP
RM.07 E
002
E RM.07
003
DR.01
004 005
RI RM.10
RM.06
FEC
006
RM.10 009
007 RM.06
RM.08 010
RW
008 E RI RM.07
ER
RD
RM.09 013RW 015 016
011 012 RM.09
RD
ER RM.07 IN.05
EP
RM.07 IN.05
014
RM.08 FEC
RI Program Location:
024 023 020 018
025 RM.07 IN.05 RM.09 RM.10
RD
RM.09 019
RD
026
E
RI ER 021
RW RM.08
RW
RM.08 RM.07
027 022
RM.10 RM.06 900 Otay Lakes Road
028
Chula Vista, CA 91910
RM.08 039
035 036 037 RM.10
RW
029 RM.09 RM.08 RM.09
RD
RM.09
FEC
030 E 032 RI
RD RW RW RD
ER
040
RM.07 DESIGN
RM.09
RD
031
RM.07 038
RM.08
041 INTENT
RW 033 034 DR.01
RM.08 IN.05 RM.06 Do Not Use As Fabrication Shop
Revisions / Bulletins:
042
RM.10
043 047 ER
RM.08 RM.07 048
E 045 RM.10
044 EPRM.07
RD
RM.09 050 051
FEC
RW
RW 046 049
IN.05 RM.08 RM.10
RM.09
RI
052
RM.06
RI
053
RM.06
054 057 060
RM.09 IN.05 RM.09
RD RW
061 062
055
RW E
058 RM.08 RM.10
RM.08 EPRM.07 Checked by:
059 ER
056
RM.07
RM.10
101
IN.05 110
ER
RM.07
100 102 Approval:
068 IN.10 RM.07 111
RM.06 DI.09
EP
112
067 072 083 086 089 103 RM.10
099 TL RM.08
RW 131
RM.10 RI RM.06
RI RM.06
RI RM.06
RI RM.10 113
IN.06 U
UP
P SL EP RD RI IN.06 Program Number: Drawn By:
FEC
063 RI RM.10
RM.07 095
15.1388.01 KS
FEC
E E 069 073
E 084
E 085 087 088
E EP FEC
EP RCS 104
RI
114 UP
UP
IN.07 TL
064 EP RM.09 IN.05
RCS 130
RM.07 RM.07 RM.07 IN.05 RM.07 IN.05 SL
IN.05 096 IN.10
070 074 ER
090 RM.07 115 Original Issue: Scale:
IN.05 IN.05 RD 105 126 FEC
RI RM.09 RM.01 RM.06 RM.06
RI EUD EP
065 066 RW 097 127 129
RI
10.07.2016 As Noted
FEC
ILP.05
E
079 RI 082 Sheet:
UP
UP
RI
RM.07 RM.05 RM.05 RM.05
RM.07 RM.06 094
080 RM.06 109 124
IN.05 RM.12 IN.07
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Prepared By:
Program Location:
DESIGN
INTENT
Do Not Use As Fabrication Shop
Revisions / Bulletins:
Checked by:
018.1
RM.07 066 068
IN.05 IN.10
031 043 055 058 067 069
DI.09 RM.10 RM.09 RM.10 RM.07 IN.06
RI Approval:
032 033 034 038 042 049 050 054 056 059
022 RI 019.1
IN.05 RM.07 RM.10 RM.07 RM.01 DR.01 RM.10 RM.08 RM.08 RM.01
RM.06 RM.06 RI
021.1 ER 030
001 018 019 020 021 RM.07
RI
020.1 RM.10 ER FEC ER FEC EUD
035 039 051 TL
Program Number: Drawn By:
RM.05 RI
RM.05 RM.05 RM.05 RM.05
FEC
RM.10 048 RW RD
SL
RM.10 RI RM.01 RI RI RI RM.06
RI RI
RM.01
017 023 RCS 027
RW RW
15.1388.01 KS
002 RI RI RI RI
IN.07 RM.01 029 ER ER ER ER RCS
FEC
063 EP 064
RM.07 036 037 040 044 047 EUD
RM.05 RI RI
DR.01 RCS RCS ER
RM.10 RM.07
ER RM.07 RM.01 RM.07 RM.07 RM.07 RD RD
028 052 057 060 062 065 Original Issue: Scale:
016 RM.10 041 046
003 RM.09 RM.09 IN.07 RM.07 IN.05
FEC
006 SL TL
010 012 013 RM.09 SL U
UP
P
Level 3
RM.05 RM.05 RM.05 RM.05
045
RI
061
RI
Sign Location Plan
024 RM.06 RM.06
007
UP
UP RM.10
IN.10
FEC N
ILP.06
008 Sheet:
IN.06
050212CIV6
2016 GNU Group. All rights reserved.
1617-2021R Exhibit 4.D.6 WAC Const. Intent
MESSAGE SCHEDULES
Exterior, Interior Branding, And Interior Wayfinding / Regulatory
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Client Name
Southwestern College
Chula Vista , CA
Programming Phase
Exterior
Submittal Date
10/07/16
Total Signs
40
Project Number
15.1388.01
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Summary Of Sign Types
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Exterior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Site 001 E.ID.08 (DONOR NAME TBD)AQUATIC 1 Trellis Name See elevation drawing
COMPLEX
Site 002 E.ID.08A (see artwork sheet) 1 Trellis Banner See elevation drawing
Site 003 E.ID.04A TICKETS 1 Ticket Window Letters See elevation drawing
Site 004 E.ID.05A (see artwork sheet) 1 Ticket Window Flag See elevation drawing
Site 005 DI.03 (TBD - standards show campus zoning - 1 Pedestrian Directional Refer to SCCD Signage
coordinate with SWC for content and Guidelines 10/15
direction)
Site 006 DI.10 (ISA) Aquatic Gate Access 1 Accessible Path Refer to SCCD Signage
(RA ->) Directional Guidelines 10/15
Site 007 E.ID.06 (see artwork sheet) 1 Sun Logo See elevation drawing
Site 008 E.ID.07 SCHOOL OF WELLNESS, EXERCISE 1 Department Letters Non-standard approved
SCIENCE & ATHLETICS by Department Dean's
Office
Site 009 E.ID.03 (DONOR NAME TBD) 1 Arena Donor Letters See elevation drawing
Site 010 DI.10 (Side A:) 1 Accessible Path Refer to SCCD Signage
(ISA) Main Entrance for Fitness Center and Directional Guidelines 10/15
Pool
(UA ^)
(Side B:)
(ISA) Gymnasium Entrance
(UA ^)
Site 011 DI.06 (TBD - coordinate with SWC for map 1 Campus Directory Refer to SCCD Signage
artwork content and direction) Guidelines 10/15
Site 012 DI.10 (ISA) To Street and Upper Levels 1 Accessible Path Refer to SCCD Signage
(LA) Directional Guidelines 10/15
Site 013 E.ID.04 TICKETS 1 Ticket Window Letters See elevation drawing
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Exterior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Site 014 E.ID.05 (see artwork sheet) 1 Ticket Window Flag See elevation drawing
Site 015 DI.10 (ISA) Upper Level & Campus (LA) 1 Accessible Path Refer to SCCD Signage
Directional Guidelines 10/15
Site 016 E.ID.02 (DONOR NAME TBD) 1 Arena Name Letters May be a custom logo
Site 018 DI.07 (TBD - standards show campus zoning - 1 Campus Directory Refer to SCCD Signage
coordinate with SWC for content and (Stanchion) Guidelines 10/15
direction)
Site 020 E.ID.01 (see artwork sheet) 1 Sun Logo See elevation drawing
Site 021 DI.03 (Side A:) 1 Pedestrian Directional Refer to SCCD Signage
(TBD - standards show campus zoning - Guidelines 10/15
coordinate with SWC for content and
direction)
(Side B:)
(TBD - standards show campus zoning -
coordinate with SWC for content and
direction)
Site 022 RG.02 (Regulator Signage TBD on striping plans 1 Regulatory Info Requires striping plan to
unavailable as of this document) program. See GC for
document availability
Site 023 DI.10 (ISA) Pool Access Through Building 1 Accessible Path Refer to SCCD Signage
(LA) Directional Guidelines 10/15
Site 024A DI.02 (UA) GYM & Aquatic Complex Parking 1 Parking Lot ID Refer to SCCD Signage
Guidelines 10/15
Page 2
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Exterior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Site 025 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 026 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 027 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 028 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 029 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 030 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 031 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 032 E.ID.09 (see artwork sheet) 1 Aquatic Banners Pole placement and
hardware TBD
Site 033 E.ID.XX (see artwork sheet) 1 Locker Headers See elevation drawing
Site 034 E.ID.XX (see artwork sheet) 1 Locker Headers See elevation drawing
Site 035 E.ID.XX (see artwork sheet) 1 Aquatic Header See elevation drawing
(A)
Page 3
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Exterior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Site 036 E.ID.10A (see artwork sheet) 1 Athletic Banners See elevation drawing
Site 037 E.ID.10B (see artwork sheet) 1 Pool Wall Graphics See elevation drawing
Site 038 E.ID.10A (see artwork sheet) 1 Athletic Banners See elevation drawing
Site 039 E.ID.XX (see artwork sheet) 1 Aquatic Banner See elevation drawing
(A)
Page 4
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Client Name
Southwestern College
Chula Vista , CA
Programming Phase
Interior Branding
Submittal Date
10/07/2016
Total Signs
5
Project Number
15.1388.01
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Summary Of Sign Types
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior Branding 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Desc. / Notes Install
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior Branding 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Desc. / Notes Install
Page 2
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior Branding 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Desc. / Notes Install
Page 3
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior Branding 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Desc. / Notes Install
Page 4
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior Branding 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Desc. / Notes Install
Page 5
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Client Name
Southwestern College
Chula Vista , CA
Programming Phase
Interior
Submittal Date
10/07/16
Total Signs
296
Project Number
15.1388.01
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Summary Of Sign Types
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
1 002 RM.13 (NFPA Chemical Marker) 1 NFPA Chemical Marker Correct NFPA Chemical
Marker to be
determined by Others
1 004 RM.13 (NFPA Chemical Marker) 1 NFPA Chemical Marker Correct NFPA Chemical
Marker to be
determined by Others
1 006 RM.13 (NFPA Chemical Marker) 1 NFPA Chemical Marker Correct NFPA Chemical
Marker to be
determined by Others
Page 1
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 2
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 3
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 4
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 5
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Level 1
--------------
Gymnasium
Team Locker Rooms
Ticket Office
Level 2
--------------
Fitness Center
Aquatic Lockers
Pool Deck
Level 3
--------------
Fitness
Multi-Purpose
Administration Offices
Page 6
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 7
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
COURTESY IS CONTAGIOUS
Page 8
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
COURTESY IS CONTAGIOUS
Page 9
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
2 008 RM.09 (Men / ISA Symbol) 1 Restroom Door ID (Title Exterior Grade
24)
Page 10
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
2 025 RM.09 (Women / ISA Symbol) 1 Restroom Door ID (Title Exterior Grade
24)
Page 11
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 12
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
2 044 RM.09 (Men / ISA Symbol) 1 Restroom Door ID (Title Exterior Grade
24)
Page 13
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
2 054 RM.09 (Women / ISA Symbol) 1 Restroom Door ID (Title Exterior Grade
24)
Page 14
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
COURTESY IS CONTAGIOUS
Page 15
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 16
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 17
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 18
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Level 1
--------------
Gymnasium
Team Locker Rooms
Ticket Office
Level 2
--------------
Fitness Center
Aquatic Lockers
Pool Deck
Level 3
--------------
Fitness
Multi-Purpose
Administration Offices
Page 19
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
2 125 IN.02 Fitness Room Rules 1 Informational Sign (Wall Copy Needed
Mounted)
Page 20
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 21
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 22
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 23
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Level 1
--------------
Gymnasium
Team Locker Rooms
Ticket Office
Level 2
--------------
Fitness Center
Aquatic Lockers
Pool Deck
Level 3
--------------
Fitness
Multi-Purpose
Administration Offices
Page 24
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 25
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 26
1617-2021R Exhibit 4.D.6 WAC Const. Intent
Copy List
Project Name Project Number Programming Phase Submittal Date
School of Wellness, Exercise Science & 15.1388.01 Interior 9/21/16
Athletics
Level Location Sign Type Copy Qty.. Sign Type Description Notes
Page 27