Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Analyzer Update
Release Notes
December 2008
Actix Release Notes Analyzer Update December 2008 2
1 In this version
This release contains support for new and updated file formats. There are updates
for most technologies that Actix supports, with changes falling under the following
categories:
Decode improvements
Stability improvements
None.
3 Decode improvements
The attribute Distance is now correctly set when the Preference Load Time
Message Filtering is selected.
The Auto Create Frequency Stream preference now works for Couei scanners.
A problem has been resolved that could have caused some GPS measurements
to be missing.
A problem has been resolved that could have caused CDMA messages to be
incorrectly decoded in rare cases.
A problem has been resolved with Nemo Outdoor version 5.xx that could have
caused duplicated GSM L3 versions of UMTS NAS messages to be decoded.
An issue has been resolved that prevented GPS interpolation from working with
UMTS scanner devices.
Initial support has been added for the following Qualcomm HSPA+ messages:
0x4222 HS decode status log packet with data Version 3
0x4186 WCDMA temporal analysis Version 2
The Auto Create Frequency Stream Preference for Rohde & Schwarz UMTS
scanner devices is now supported.
In EDGE technology log files, an issue has been resolved with the decoding of
the modulation and coding scheme (MCS).
Added support for version 10.1.xx. This mainly consists of improvements with
the HSDPA attributes support for Nokia handsets.
A problem has been solved which caused log files with Japanese characters not
to load in Analyzer.
A problem has been resolved which could cause the Time attribute to be set
incorrectly in log files spanning over midnight.
A problem has been resolved which could cause Top N UMTS scanner
attributes not to be sorted correctly by EcIo.
A problem has been resolved which could cause the PN Delay to be incorrectly
set to negative values. The fix consists in using the Preference Scanner Ec/Io
Threshold to filter out measurements with a level below the noise floor, as they
are the source of the vast majority of incorrect PN Delay values.
3.12 Generic
Added initial support for RRC release 7 messages (3GPP specification 25.331
release 7 version 10 from 09-2008).
Actix Release Notes Analyzer Update December 2008 5
Improvements have been made to the algorithm that determines the serving
sector from the test device GPS coordinates.
A problem has been resolved which could cause the DT Data Testing report to
display no result.
A problem has been resolved so that the Spotlight binned query GSM DT
Design Validation and Quick Analysis is now displayed correctly in maps and
tables.
In UMTS, the PS event detection has been improved so that a PS call setup is
now detected at the Activate PDP Context Accept message, even if the RRC
messages Radio Bearer Setup and / or Radio Bearer Setup Complete are
missing. If the message Radio Bearer Setup is missing, a new attribute
Uu_MissingRRCMessage_Flag is set, in order to indicate that a key message
potentially affecting the event detection is missing.
In EVDO, new events have been created that are set when a personality switch
occurs:
Personality_Change_RevA_To_Rev0
Personality_Change_Rev0_To_RevA
None.
Actix Release Notes Analyzer Update December 2008 6
ReleaseNotes_Analyzer_Update_November2008.pdf
ReleaseNotes_Analyzer_Update_October2008.pdf
ReleaseNotes_Analyzer_Update_September2008.pdf
ReleaseNotes_Analyzer_Update_August2008.pdf
ReleaseNotes_Analyzer_Update_July2008.pdf
ReleaseNotes_Analyzer_Update_June2008.pdf
ReleaseNotes_Analyzer_Update_May2008.pdf
ReleaseNotes_Platform_FileFormat_2008Apr_FF22.pdf
ReleaseNotes_Platform_FileFormat_2008Feb_FF21.pdf