Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TUBE CLAMPS
CATALOGUE
including our
WORKING AT HEIGHT RANGE
Tube Clamps DDA Handrail pre - assembled safety posts Handrail Bends
warmagrip Roof edge protection handrail standards Adjustarail
Mesh Infills Kick plate FABRICATED GATES ROOF DOMES ROOF ANCHOR
industrial ROOF ACCESS ladder ACCESSORIES LADDER KITS
TUBE CLAMPS & GALVANISED TUBE BRUNDLE
Tube Clamp fittings are manufactured with simplicity and ease of use very much in mind. No special skills are required
no welding, no bending, no threading, just an Allen key to tighten the set screws and you can join tubes together in a
matter of seconds. The comprehensive range of fittings and sizes means Tube Clamps can be used in a wide variety
of applications, temporary or permanent. For example in the construction of:
As with the fittings weve also made ordering simple. Each illustration in this manual carries a number - for example 16101.
Look under the type column and you will see that this fitting is available in five different sizes A, B, C, D and E. Each of
these letters refers to the size of the tube on which the fitting is to be used as indicated below. No letter after the fitting
number indicates that size is not available at the time of printing. For example 16191 is only available to suit size D tubing.
GALVANISED TUBE
26.9mm
33.7mm
42.4mm
48.3mm
SPECIAL LENGTHS
CUT TO ORDER.
See page 35
NOTE: The standard finish is hot-dipped galvanised to BS EN ISO 1461 Tube Clamps and
tube can also be supplied to order, polyester powder coated in a range of colours.
Whilst every care has been taken to ensure that the information given in this catalogue is correct,
F.H.Brundle reserves the right to alter and revise this information as and when they consider it
60.3mm necessary. This is in line with its policy of ongoing research and development.
2
BRUNDLE
DDA HANDRAIL FITTINGS
FOR DISABLED ACCESS
06
03
01 04
DDA rails are 42.4mm tube
08
Uprights are 48.3mm tube
01 02
07
08
For uprights use type D tube ( 48.3mm) for horizontal use type C tube ( 42.4mm).
Enquire now for warmagrip warm to the touch handrail system. See page 43.
01 02 03
3
DDA HANDRAIL FITTINGS BRUNDLE
04 05
06 07
08
mm Code mm Code
42.4 1699508C 48.3 16133D
03
06
05 07
08 04 01 01 02 07 08
4
BRUNDLE
TUBE CLAMPS
Adjustable Short Tee Two Socket Cross Wall Flange Railing Base Flange
30 - 60 With adjustable centre 30 - 45
**
A size to suit 26.9mm tube B size to suit 33.7mm tube C size to suit 42.4mm tube
5
tube clamps BRUNDLE
Gate Hinge Railing Side Support Kick Plate Clamp Handrail Bracket
**
Railing Side Support Railing Side Support Side Palm Fixing Internal Swivel Tee
Vertical base Horizontal base
Short Swivel Tee Sleeve Joint Internal Joint Angle Base Flange
Used in pairs 11 - 30 slopes
6
BRUNDLE
TUBE CLAMPS
Base Flange Short Tee Elbow Long Tee
Allows slope up to 11 Allows slope up to 11 Allows slope up to 11 Allows slope up to 11
A size to suit 26.9mm tube B size to suit 33.7mm tube C size to suit 42.4mm tube
7
TUBE CLAMPS BRUNDLE
Mesh Panel Clip Mesh Panel Clip Single Swivel Female Section Of
Single Double Combination Swivel
Also available in stainless steel Also available in stainless steel
* *
Single Male Section Side Outlet Tee Three Socket Tee Two Socket Cross
of Swivel 11 - 30 slopes 11 - 30 slopes
**
8
BRUNDLE
Tube clamps
Pallet Flange Wall Mounted Stair Tread Bracket Metal Stop Ends
Handrail Joiner
Stair Tread
Code: 44001
Safety Brace
Code: 44001TCB
Short Tee
Code: 16101D Short Tee
Code: 16101D
A size to suit 26.9mm tube B size to suit 33.7mm tube C size to suit 42.4mm tube
9
TUBE CLAMP slope fittings BRUNDLE
154
155
154
153
156
153
152
152
152
For railings required on slopes and ramps between 0 - 11. Available to suit 42.4 and 48.3mm tube (C and D size).
N.B. The tolerance on standard Tube Clamp fittings is between 3 and 5.
FOR SLOPES UP TO 11
Base Flange Short Tee Elbow
155 156
WE CAN SUPPLY
Type Code Type Code MESH INFILL
C 16155C C 16156C PANELS.
D 16155D D 16156D
FOR SLOPES 11 - 30
Angle Base Flange Three Socket Tee Two Socket Cross
FOR APPLICATION
GUIDES GREATER
THAN 11, SEE PAGE 11.
10
BRUNDLE
APPLICATION GUIDE
CONSTRUCTING OF AN INLINE GUARDRAIL - SLOPING
ADJUSTABLE 30 - 60 VARIABLE ADJUSTABLE 30 - 45 0 - 45 MACHINED TO
REQUIRED ANGLE
129 129
125
133 177
Tube bend
129 101
130 178
Tube bend
BOTTOM END POST 0 - 11 MID POST 0 - 11 TOP END POST 0 - 11 LEVEL TO SLOPING
155
155 125
154
129
156
156 101
153
129
101
152
146 146
133
133
125
128
104
16176 176 148
+ 16133
to plug top
of open end
in upright
101
148 116
119
176
11
MESH INFILL PANELS BRUNDLE
mm Code
42.4 16170C
48.3 16170D
Mesh Size Mesh Size Frame Panel
Gauge Code
Inch mm (approx) mm H x W mm
2x2 50 x 50 10g 8 972 x 1382 0102003B Mesh Panel Clip double
Also available in stainless steel
mm Code
42.4 16171C
48.3 16171D
Through Bolt
Zinc Plated
TESTED
TO
0.74kN
mm Length mm Code
NOT SUPPLIED ASSEMBLED 12 100 162412
Code Code
Post Type
42.4mm 48.3mm FOR OUR FULL RANGE
End 1603004C 1603004D
OF GALVANISED TUBE,
Intermediate 1603005C 1603005D
Corner 1603006C 1603006D SEE PAGE 2.
12
BRUNDLE
MESH INFILL PANELS
mm Code
42.4 16170C
48.3 16170D
Mesh Size Mesh Size Frame Panel
Gauge Code
Inch mm (approx) mm H x W mm
2x2 50 x 50 10g 8 826 x 1382 0102004B Mesh Panel Clip double
Also available in stainless steel
mm Code
42.4 16171C
48.3 16171D
Through Bolt
Zinc Plated
TESTED
TO
0.74kN mm Length mm Code
12 100 162412
NOT SUPPLIED ASSEMBLED
13
MESH INFILL PANELS BRUNDLE
mm Code
42.4 16170C
48.3 16170D
Mesh Size Mesh Size Frame Panel
Gauge Code
Inch mm (approx) mm H x W mm
A 2x2 50 x 50 10g 8 369 x 1382 0102001B Mesh Panel Clip Double
B 2x2 50 x 50 10g 8 470 x 1382 0102002B Also available in stainless steel
mm Code
42.4 16171C
48.3 16171D
Through Bolt
Zinc Plated
TESTED
TO
0.74kN
mm Length mm Code
SUPPLIED ASSEMBLED 12 100 162412
Code Code
Post Type
42.4mm 48.3mm FOR OUR FULL RANGE
End 1603001C 1603001D
OF GALVANISED TUBE,
Intermediate 1603002C 1603002D
Corner 1603003C 1603003D SEE PAGE 2.
14
BRUNDLE
Pedestrian Panels
HANDY
TIP!
Adjustable Angle
Code: 16148D x 2
mm Code
42.4 1603003CA
48.3 1603003DA
Handy Accessories
TESTED Through Bolt
TO Zinc Plated
0.74kN
NOT SUPPLIED ASSEMBLED
15
HANDRAIL BENDS BRUNDLE
F.H.Brundle is continually striving to make installations quicker and easier. Tubular bends in both galvanised and
self colour for 33.7, 42.4 and 48.3mm tube will do just that. These bends are designed for Handrail Standards,
Adjustarail and Tube Clamps. Joining bends to handrail tube couldnt be simpler with splice locks, Tube Clamp 16149
sleeves or 16150 internal joints.
Made Made
TO Order TO Order
Self Colour
Description (mm Legs) 33.7mm 42.4mm 48.3mm
Adjustarail return bends (500mm centres) 300 legs 25BA25113 25BA32113 25BA40113
Standard return bends (550mm centres) 300 legs 25B25113 25B32113 25B40113
90 bends 300 legs 25B25143 25B32143 25B40143
Galvanised
Description (mm Legs) 33.7mm 42.4mm 48.3mm
Adjustarail return bends (500mm centres) 300 legs 25BA25213 25BA32213 25BA40213
Standard return bends (550mm centres) 300 legs 25B25213 25B32213 25B40213
90 bends 300 legs 25B25243 25B32243 25B40243
Crimp Connectors
To suit 33.7mm
16
BRUNDLE
SELF CLOSING FABRICATED GATE
1070mm
For use with tube clamps &
roof edge protection system.
1090mm
Lockable with padlock through 15mm hole
Gate post centres 1070mm FROM
Not supplied with base fittings STOCK
16147 16101
125 125
Tighten the setscrew on
the 16147 to the gate
Tighten the setscrew on
the 16101 to the 16147
Tighten the setscrew on
101 101
the 16179 to the upright
Leave the setscrew on
16179 the 16101 to the upright
125 125
GATE UPRIGHT loose
17
ROOF EDGE PROTECTION BRUNDLE
NO FIXINGS REQUIRED
Roof Edge Protection is a system that requires no fixings or drilling and subsequently no repair to the roof membrane.
It is suitable for flat or nearly flat roofs. The system operates on a counterbalance principle using curved PVC
counterweights as the main component. A galvanised malleable iron foot supports the handrail post, this includes
an integral toeplate facility which is a fundamental requirement if there is no perimeter edge upstand.
Finish Code
Recycled PVC
16RE11G40
moulding
1100mm
1100mm
Run End Counterweight
Finish Code
Finish Code Finish Code Recycled PVC
16RE12G40
moulding
Galvanised 16RE00G40 Galvanised 16RE00G40SS
To suit 48mm tube To suit 48mm tube 90 Elbow
18
BRUNDLE
ROOF EDGE PROTECTION
ASSEMBLY
FREE ENDS
19
ROOF DOME MAXI BRUNDLE
Roof Dome Maxi is a modular system designed specifically to prevent falls through skylights, roof hatches and other roof
penetrations. Sturdy recycled PVC bases lock the posts into position around the corners of a skylight then Tube Clamp
fittings and tube are used to construct a rigid frame. Additionally a gate can be incorporated for access to roof hatches.
1 2
2200mm 2200mm
(max) (max)
1100mm
(min) 1100mm
550mm (O/A)
1500mm 2000mm
(max centres) (max centres)
3 4
1100mm 1100mm
(min) (min)
3200mm
(max centres) 1500mm 1800mm
1500mm (max centres) (max centres)
(max centres)
20
BRUNDLE
ROOF DOME MINI
Roof Dome Mini is made from 33.7mm (size B) fittings and tube and incorporating new smaller recycled PVC bases.
The product has been developed to maximize safety without being obtrusive when a building rooftop is visible. The top
cover of this is very easy to assemble using Tube Clamp fittings, making this a quick and effective protection solution.
FEATURES
Modular system
Designed using 33.7 mm (size B) tube and fittings
Galvanised to BS EN ISO 1461
Complies with EN 14122 pt3
Suitable for use on all roof surfaces with a maximum
pitch of 3
Recycled PVC bases
BENEFITS
Top cover minimises the risk of falling through the skylight
Unobtrusive solution on visible roof tops
Rapid assembly
Designed as a permanent solution, but can be dismantled,
moved and re-erected elsewhere
L x W mm Code
1200 x 1200 16KDK4
1800 x 1800 16KDK5
21
ROOF ANCHOR BRUNDLE
Roof Anchor is a mobile, deadweight anchor device for use on roofs of up to 5 pitch, where the absence of guardrails
or permanent anchor devices would otherwise preclude safe means of access. Roof Anchor is the first Class E
anchor device to be approved for use on metal clad rooftops up to 5 pitch (subject to the addition of two extra
weights) and all roof surfaces in wet conditions. Roof Anchor utilises a central point which raises the height at which
the arrest force is applied, thus reducing the distance the anchor device moves during a fall arrest event.
1420mm
355mm
ONLY 355mm
250kg
Description Code Torso Chest Thigh
Code
Deadweight anchor system 16WTA Length mm Circuit mm Circuit mm
25kg single weight 16DWA1012 550 - 750 750 - 1200 500 - 700 16FP01C10
22
BRUNDLE
BOARD-WALK
IDEAL FOR Short duration roof maintenance
between the eaves & ridge level
Fitted to form the first point of support from the valley For rolling the Board-Walk to ridge level and hooking over
into position
23
VALLEY-WALK BRUNDLE
550mm
20
00
mm
m
00m
10
24
BRUNDLE
PAINTERS MATE
Lightweight and safe personal mini access platform, for any external short duration work at heights of up to 4m
(reach). Comprising of a secure gated platform and a special detachable ladder, Painters Mate is light enough to
lift and shift whilst still assembled, and easily transportable.
25
LADDER SAFETY ACCESSORIES BRUNDLE
ANCHOR-FIX LADDER-SPURS
Helps top stability by Reducing the chance of a
widening the base of the sideways slip at the top
ladder Prevents outward slip
Maximum slope angle 15 Width at base 750mm plus
Maximum stile width 70mm ladder width
Maximum ladder width Maximum stile size
450mm 120 x 35mm
Weight 5.2kg Weight 5kg
Base width 980mm Reach 500mm
Clearance 90mm Material steel
Material aluminium and
steel
Code Code
16ED604S 16ED601S
Code Code
16LALS10 16LAT50
26
BRUNDLE
LADDER SYSTEM KITS
2 - 6m available
easy to install
Modular
27
LADDER SYSTEM KITS BRUNDLE
Galvanised
Long Ladder Section Top Hoop With Holes
2500mm Supplied with set of 5 bolts
Lower Hoop
Code: 25AX9
Ladder Stays
(sold in pairs)
Ladder Foot
(sold in pairs)
Stringers 65 x 10mm flat Cage 50 x 8mm flat Mild Steel Ladder Rung
400mm inside stringers Rungs 20mm solid bar
All items sold with necessary bolts/nuts Galvanised
and washers (excluding structure/wall fixings)
28
BRUNDLE
LADDER SYSTEM KITS
LADDER ASSEMBLY DETAILS
NOTE
Cup head bolts for extension
pieces above floor level to be
fitted to the inside of the ladder.
Ladder Extension
(sold in pairs)
Extended Stringers
(sold in pairs)
Top Step
Splice Plates
(sold in pairs)
NOTE
Cup head bolts for ladder
sections to be fitted to the
outside of the ladder.
Ladder Stays
(sold in pairs)
Ladder Sections
Ladder Foot
(sold in pairs)
NOTE
The longer cup head bolts are to
be used when connecting 3 no.
thickness of material together.
29
LADDER SYSTEM KITS BRUNDLE
Code: 25AX8
Code: 25AX8
Code: 25AX9
Code: 25AX9
NOTE
For 25AX9 hoops the cup head
bolts are always fitted to the
Lower Cage Strap outside of the ladder.
(sets of 5)
CAGE SPLICE
ASSEMBLY Code: 25AX9
NOTE
The longer cup head bolts are to
be used when connecting 3 no.
thickness of material together.
30
BRUNDLE
LADDER SYSTEM KITS
LADDER KITS FOR APPROX 2000, 2500 & 3000mm RISES
240mm
240mm
700mm
100mm
100mm
1200mm
1200mm
to suit to suit
Cut straps
to suit
Re-drill for
top hoop if
2000mm approx up to 2300mm max
required
2500mm
Stays can be
2375mm
optimum
fitted to any hole Stays can be
2200mm min
in ladder to suit fitted to any hole
3000mm max
requirements in ladder to suit
2500mm
2375mm
Cut down main
optimum
ladder section
2200mm min
at base to suit
3000mm max
Cut down
1200mm
Stays can be
2400mm up to 2700mm max
requirements
2500mm the fittings please use the
2515mm
31
LADDER SYSTEM KITS BRUNDLE
240mm
700mm
700mm
1200mm
1200mm
to suit 100mm to suit
100mm
1035mm
1035mm
Stays can be
fitted to any hole
in ladder to suit
requirements Stays can be
fitted to any hole
3300mm up to 3800mm max
in ladder to suit
requirements
3500mm approx
2500mm
optimum
2200mm min
3000mm max
2500mm
2375mm
optimum
2200mm min
3000mm
max
Cut down
ladder section
at base to suit
Cut down
ladder section
at base to suit
32
BRUNDLE
LADDER SYSTEM KITS
LADDER KITS FOR APPROX 4500 & 5500mm RISES
Cut straps
Cut straps
to suit
700mm
700mm
to suit
1200mm
1200mm
240mm 240mm
100mm 100mm
1035mm
1035mm
1000mm
fitted to any hole fitted to any hole
in ladder to suit in ladder to suit
requirements requirements
4400mm up to 5200mm max
4500mm approx
2500mm
2590mm
optimum
2200mm min
3000mm max
2500mm
2590mm
optimum
Cut down 200mm min
ladder section 3000mm max
at base to suit
33
LADDER SYSTEM KITS BRUNDLE
Component List
Description Code
2500mm ladder section 25AX1
1250mm ladder section 25AX2
Extended stringers pair (incl. 4 no. 12 x 35mm bolts) 25AX3
Extensions to floor pair (incl. feet, incl. 4 no. 12 x 35mm bolts) 25AX4
Top steps (incl. 4 no. 12 x 50mm bolts) 25AX5
Ladder feet pair (incl. 4 no. 12 x 35mm bolts) 25AX6
Ladder stays pair (incl. 4 no. 12 x 35mm bolts) 25AX7
Ladder system upper hoop - 700 x 750mm with holes and 5 no. 12 x 36mm bolts 25AX8
Ladder system lower hoop - 700 x 7500mm with holes and 5 no. 12 x 36mm bolts 25AX9
Splice plates pair (incl. 6 no. 12 x 35mm bolts) 25AX10
Upper cage straps set of 5 25AX11
Lower cage straps set of 5 (incl. cage splices and 10 No. 12 x 50mm bolts) 25AX12
34
BRUNDLE
TUBULAR HANDRAIL STANDARDS
Self colour or galvanised to fit 33.7, 42.4 AND 48.3mm TUBE
Selfcolourventedforgalvanising
M8 clampingscrewsfittedtoballs
1010mm
1067mm 1100mm 1250mm
90mm
66mm
32.5mm 65mm
35
ADJUSTARAIL BRUNDLE
Load tested
500mm 500mm
500mm 700mm
70mm 180mm
RSJ BOLT DOWN POST Useful 48.3mm Fittings for Bolt Down Posts
Suits tube
48.3mm
Overall height
1060mm Code Code Code
Base plate 16131D 16133D 16125D
200mm square
Sleeve Joint Internal Joint Locking Collar
Upright
50 x 100mm
36
BRUNDLE
TUBULAR HANDRAIL STANDARDS
Self colour or galvanised to fit 33.7, 42.4 AND 48.3mm TUBE
Handrail
Diameter Base Options
1 2 3 4
Rake
Degrees Rectangular Horizontal Long Side Palm Rectangular Raked
Flat Base Side Palm Flat Base
35mm mm
65mm 25
65
Ball
mm
Diameter 65mm 65mm
25mm mm
50
65mm
100mm 100mm m
0m
150mm 150mm 10
65mm
Shank
Diameter 5 6 7
Round Base Triangular Square Base Handrail & Ball
B Side Palm Diameter
Options
60mm Handrail Ball
mm mm
33.7 63
150mm 150mm
33.7 75
150mm 100mm
42.4 75
Dimension B is to bottom 48.3 75
of base plate if flat base 48.3 90
or centre of top hole if 150mm
side mount. 100mm 100mm
37
TUBULAR HANDRAIL STANDARDS BRUNDLE
5 6 7
Round Base Triangular Side Palm Square Base
For 10,15 & 20mm thick Footplates call youR local branch today!
38
BRUNDLE
Handrail standard gates
FROM
Supplied with hinge post and slam post STOCK
Galvanised
Height 1100mm
Horizontal tube centres 550mm on horizontal rails
Gate post centres 1070mm
Lockable with padlock through 15mm hole
Base plate: 2 x 18mm holes at 100mm centres
We stock the largest range of gate closers in the UK, visit www.fhbrundle.co.uk
39
WELDABLES BRUNDLE
WELDABLE CAPS
25C114
25C42
40
BRUNDLE
KICK PLATE CLAMPS
Profile Type
As the installation of kick plates has become more prevalent in mezzanines around factories, warehouses and
the work place, so has our range of accessories to help the installer retro fit and help conform to changing
building regulations.
H x W x L mm Code
150 x 25 x 3000 25KF3000
41
KICK PLATE CLAMPS BRUNDLE
3
5
1
2
42
BRUNDLE
WARMAGRIP HANDRAILING
A WARM TO THE TOUCH DDA COMPLIANT HANDRAIL COMPONENT SYSTEM
G A 02
26
27
DDA B 25 04
03 24
15
Building D
E
Regs
19 02
06
TESTED 22 01 09 21
Health & TO 02
C 23
Safety 0.74kN F
11 18 20
02 03 22
19 06 01
Mid Rail Single Adjustable Mid Rail Single Mid Rail Double
21 04 20
Adjustable Mid Rail Double Mid Rail Corner 63.4 Mid Rail Double
09 11 23
43
WARMAGRIP HANDRAILING BRUNDLE
18 15
TUBE OPTIONS
Steel Core
Tube
Code Code
52SFS 52LFS
44
BRUNDLE
OTHER PRODUCT RANGES
WROUGHT IRON Components GATE AUTOMATION
Endless design opportunities with our huge range of Full range of CAME gate kits, motors, intercoms and
wrought iron components. accessories available from stock.
The most comprehensive range of swing and sliding gate Ready-to-install galvanised or powder coated bow tops.
accessories from one supplier. RoSPA play and standard in many different heights.
Robust, tough and corrosion resistant. Vandgard is Open Steel Flooring, Durbar, Gratings, Chequer Plate
lightweight, easy to handle and quick to install. and much more.
45
OTHER PRODUCT RANGES BRUNDLE
A full range of mesh panel fence systems to provide robust, Protect people, property and plant from the damage
good quality and secure solutions at a competitive price. caused from moving machinery and vehicles.
A stylish and durable stainless steel handrail component Provides the finishing touch to your design with brilliant
system designed with ease of installation in mind. cool white light.
Visit
www.fhbrundle.co.uk
Whilst every care has been taken to ensure that the information given in this catalogue is correct, F.H.Brundle reserve the right to alter
and revise this information as and when they consider it necessary. This is in line with their policy of ongoing research and development.
46
BRUNDLE
FREE
Visit www.fhbrundle.co.uk
and click on the Design App icon
47
PRO-RAILING
THE FLOORING AND
THE WROUGHT IRON CATALOGUE
MATION
OGUES,
LOW.
e
etails
tails ANY QUANTITY SUPPLIED
F.H.BRUNDLE
BRUNDLE
28
28 Coxhill
Coxhill Street
Street
F.H.BRUNDLE
nge
n ge Springburn
Springburn COMPETITIVE PRICES WHOLESALE DISTRIBUTORS SINCE 1889
Glasgow
Glasgow
G21
G21 1HN
1HN
99
99 Tel:
Tel: 0141
0141 332
332 3231
3231
AVAILABLE FROM STOCK
11
11 Fax:
Fax: 0141
0141 332
332 7325
7325
BRUNDLE
www.fhbrundle.co.uk
c
com
om
01/2015