Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TENDER
FOR
PART IV
Price Bid
Total in
Sr No Name of S/S Supply Erection Civil Rs.
220kv Suva (Rahiyad)
1 S/S
Bidder's
Seal
Date : ___________________________
Total
I/ We agree to supply the articles noted above at the rates herein tendered by me/ us subject to
the condition of tender and supply of the Tender inquiry, which I / We have carefully read and thoroughly
understood.
I/ We hereby agree to keep this offer open for 180 days after the date of the opening of technical
bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time.
Unit
SR. Descripti
No./ Qty. Particulars
NO. on
wt. Total erection
Erection/ Unit rate of &
Commis erection & commissionin
sioning comm. g charges on
rate per Any other charges + end cost
unit tax any other tax basis (Qty. x
(includin Unit rate
g Service
tax)
TOTAL
I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to
the condition of tender and execute of the Tender inquiry, which I / We have carefully read and
thoroughly understood .
I/ We hereby agree to keep this offer open for 180 days after the date of the opening of
technical bid of tenders and shall be bound by communication of acceptance dispatched within
the prescribed time.
Bidder's
Seal
Date : ___________________________
Name of Substation:----------------------
Amount in Rs.
SR.
RATE IN RATE IN
NO DESCRIPTION UNIT QTY. AMOUNT
FIGURE WORDS
.
TOTAL
TOTAL AMOUNT
IN WORDS
I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to
the condition of tender and execute of the Tender inquiry, which I / We have carefully read and
thoroughly understood.
I/ We hereby agree to keep this offer open for 180 days after the date of the opening of
technical bid of tenders and shall be bound by communication of acceptance dispatched within
the prescribed time.
Bidder's
Seal
Date : ___________________________
5 BPI 8kN with str and clamp connectors as per Technical spec No. 219 219
HBPI 8kN with str and clamp connectors as per Technical spec No. 30 30
6
HDB Isolator with one ES 1600A 40kA 3s with str and clamp connectors
7 Set. 2 2
as per Technical spec
Supply and Erection of 220kV Switchyard materials considering
31mm/kV creepage distance due to marine atmosphere of site as per
respective technical specifications and relevant special conditions
suitable for Two Main Bus with Quad ACSR Moose conductor and
B relevant Flyover Bus with Twin ACSR Moose conductor. ,
1 Gantry structures GI as per BOM, Steel & A/B part MT 121
127.4
2 Gantry structures GI as per BOM, Bolt nut part MT 6.4
VHF Tower Mast Structure GI with stub, template complete as per BOM,
3 MT 1.65
Steel & A/B part
1.7
VHF Tower Mast structures GI with stub, template complete as per BOM,
4 MT 0.05
Bolt nut part
Stringing of bus with Quad Moose ACSR conductor for all the three
phases with required insulators, hardwares & accessories, spacers
provided at every 3.0 mtr. interval etc. complete as per relevant standards
5 and approved drawings with Jumpers for continuous Bus Arrangement (It
includes cost of insulators, hardwares & accessories, spacers etc.all items
required for satisfactory functioning. Any variation in quantities shall be
absorbed by contractor.)
No.
Main Bus with 36 Mtr span including bus jumpers of 18 18
a Span
Stringing of Earth Wire with 7/3.15 GS wire with required hardwares &
accessories etc. complete as per standards and approved drawings .(It
6 includes cost of hardwares & accessories, etc. all items required for
satisfactory functioning. Any variation in quantities shall be absorbed by
contractor.)
a 36 mtr span Span 10 10
3
66kV SBB Hybrid switchgear module for 66kV Bus Coupler bay Set. 1 1
Surge Arrester 60kV, 10KA, Class 3 with structure and clamp connectors
suitable to provide connection between 66kV Cable and Single Moose No. 18 18
4 ACSR
Surge Arrester 60kV, 10KA, Class 3 with structure and clamp connectors
5 suitable for Single Moose ACSR No. 9 9
6 PT 66kV/v3-/110V/v3-2C with structure and clamp connectors suitable for
No. 6 6
Single Moose ACSR
BPI 4kN with structure and clamp connectors as per Technical spec
No. 129 129
7
HBPI 4kN with structure and clamp connectors as per Technical spec No. 24 24
8
a Main Bus with 30.9 Mtr. Span including bus jumpers Span 4 4
b Main Bus with 34.4 Mtr span including bus jumpers span 2 2
c Main Bus with 31.9 Mtr. Span including bus jumpers Span 2 2
d No.
Transformer flyover bus with 42 Mtr. Span of 2 2
bay
4
Stringing of Earth Wire with 7/3.15 GS wire with required hardwares &
accessories etc. complete as per standards and approved drawings for
the shown span. (It includes cost of hardwares & accessories etc. all items
for satisfactory functioning. Any variation in quantities should be absorbed
by erection contractor.
a No.
220/66KV Transformer Bay - LA of 2 2
bay
b No.
66KV PT Bay of 2 2
bay
c No.
66KV Line Bay of 6 6
bay
d No.
66/11KV, 5MVA Station Transformer of 1 1
bay
a No.
220/66KV Transformer Bay (66KV side) of 2 2
bay
b No.
66KV Bus Coupler Bay of 1 1
bay
5) Carbon dioxide (CO2) gas type of capacity 22.5 Kg. capacity No. 0 1
6) Mechanical Foam type of capacity 9 LT. No. 0 2
7) Mechanical Foam type of capacity 50 LT. No. 0 1
2
Pack
Battery Room LS LS
i age
Pack
LV Room LS LS
ii age
Pack
Store Room LS LS
iii age
Pack
Ramp Slope LS LS
iv age
Pack
Veranda LS LS
v age
Pack
Toilet Gents LS LS
vi age
Pack
WC LS LS
vii age
Pack
Toilet Ladies LS LS
viii age
Pack
Passage (Corridor) LS LS
ix age
Pack
Water Room LS LS
x age
Providing and fixing of flood light luminaries as per design for 66kV switch
yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 150/250W
lamp with energy efficient type choke (HF) with control gear box &
ancillaries and suitable for mounting on structure at appropriate height ( as
per design) as per specifications TS illuminations cl. no 2.10.4.8 with
Pack
necessary GI fabrication & GI bolt nuts to fix control gear box at the LS LS
age
structure with complete internal and external wiring to J. box ,Dist
panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2
copper armoured cable (as per spec ) .The scope includes supply and
erection of all the materials required for satisfactory functioning of above
work.
Providing and installation of post top lantern for main gate and road from
main gate to swichyard via control room as per design with
Philips/CGL/Bajaj/GE/Oshram make and energy efficient type suitable
wattage lamp with control gear box & ancillaries suitable for mounting on
Gate pillars and 4.5 mtr poles with necessary GI fabrication & GI bolt nuts
to fix control gear box with complete internal and external wiring to Pack
LS LS
J.box,Dist panel/section feeder pillar, fixing terminal etc. with supply of age
required 3 c x 2.5 mm2 copper armoured cable as per spec .This also
includes the supply and erection of required 4.5 mtr poles and its
foundation work as per spec and earthing with main mesh. The scope
includes supply and erection of all the materials required for satisfactory
functioning of above work.
5
Providing & Fixing of Energy Efficient Indoor 2x36 Tube light for Quaters,
Security Building, Store Building etc. in all the rooms, passages complete
(ref. Ann-4 Item (B,C&D)) as per technical spec with required casing
caping point wiring as per technical spec. Scope also includes providing
and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex-
Fan,with requisite MCBs and as per Ann-4 Item (B,C&D)
Pack
6 age LS LS
Note: Extra earth should be removed away from the site s/s premises
or refilling earthing pits if required. All required materials for this job
such as CI pipe, CI cover with frame, salt, cement, sand,
charcoal/bentonite, gravel, bricks etc. to be supplied by the
contractor.
Control & Protection panels for 220KV Bays ( Control Voltage - 220V DC )
1 as per tech specifications & suitable for Hybrid switchgear modules
with following break up
1A) Control & Protection panel for line with Distance protection relays as
Main-I & Main-II Set 8 8
1B) Control & Protection panel for line with Line Differential protection
relays as Main-I & Main-II Set 2 2
Control & Relay Panel for 220kV Suva feeder bays at consumer end
substation ( Control Voltage - 110/220V DC ) which are connected
A2.1
with short lines (i.e. with lines having length < 5Km) to Suva s/s as per
tech specifications with following break up.
a) Control & Relay Panel for 220kV lines with Line Differential Protection Set 2 2
relay as Main-I & Main-II Protection
2 Control & Protection panel for Transformer with Differential Set 2 2
3 Control & Protection panel for BC Set 1 1
Control & Protection Panel for 66kV bays ( Control Voltage - 220V DC ) as
per tech specifications & suitable for Hybrid switchgear modules with
1 following break up.
1) Control & Protection Panel for Line Set 6 6
2) Control & Protection Panel for Buscoupler Set 1 1
Battery set - 220 V, 350Ah (2 V, 110 cells) Plante type Lead Acid Battery
1 No. 2 2
Set with FRP stand of adequate size
2 Battery Charger - 220 V (Float - 70A / Boost - 70A) - (SCADA compatible) No. 2 2
3 DCDB-220 V with 35 Feeder No. 0 0
4 DCDB-220 V with 20 Feeder No. 4 4
5 LTPB - (SCADA compatible) No. 2 2
2
1) 2c x 2.5 mm , copper control cable Mtr. 550 550
2) 2c x 4 mm2 , copper control cable Mtr. 6900 6900
3) 4cx2.5 mm2, copper control cable Mtr. 3400 3400
4) 4c x 4 mm2 , copper control cable Mtr. 7500 7500
2
5) 7c x 2.5 mm , copper control cable Mtr. 600 600
2
6) 12c x 2.5 mm , copper control cable Mtr. 2900 2900
2
7) 12c x 4 mm , copper control cable Mtr. 1400 1400
8) 19c x 2.5 mm2 , copper control cable Mtr. 3500 3500
9) 27c x 2.5 mm2 , copper control cable Mtr. 2550 2550
10A) 1 x 50 mm2 , copper cable Mtr. 2500 2500
2
10B) 4C x 10 mm , copper control cable Mtr. 200 200
2
12) 3.5 x 25 mm , Al. armoured LT cable Mtr. 200 200
2
13) 3.5 x 50 mm , Al. armoured LT cable Mtr. 1000 1000
15) 1C x 150 mm2 , Al. armoured LT cable Mtr. 2150 2150
1) cables from 2 core to 7 core of 2.5 & 4.0 Sq.mm size No. 700 700
2) cables above 7 core No. 650 650
Providing and fixing of 50mm dia 'B' class GI pipes with necessary size of
band and couplings for control cable protection of CT, PT/CVT etc.
equipments including fixing with structures as per instruction of Engineer-
4 in-charge.
1) 220 kV Switch Yard Mtr. 100 100
2) 66 kV switch yard Mtr. 25 25
Providing and fixing of 100mm dia 'B' class GI pipes with necessary size
of band and couplings for control cable protection of CB, Isolator
etc.equipments including fixing with structures as per instruction of
4a Engineer-in-charge.
1) 220 kV Switch Yard Mtr. 25 25
2) 66 kV switch yard Mtr. 10 10
Providing and fixing of GI tray of suitable size with necessary size of
bands & joints and top covers for cable protection of LCC as per
4b instruction of Engineer-in-charge.
1) 220 kV Switch Yard Mtr. 35 35
2) 66 kV switch yard Mtr. 20 20
Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders No. 2 2
6
Providing and fixing Yard LT ACDB as per tech spec -with 12 OG feeders No. 2 2
7
Providing and fixing of all weather proof, cold rolled sheet steel junction
box for CVT & PT, CT terminations with 30 Nos. of disconnecting type,
8 No. 4 4
'Elmex' make CATDM 4 or equivalent type connectors and required no of
fuses, links etc.as per instruction of Engineer-in-charge.
M
Supply, Erection, Testing and Commissioning of SCADA equipments
and materials as per respective technical specifications and relevant
special conditions and suitable for Two Main Bus system on 220kV
and 66KV side
6 FSK Data Modem Make: ABB & Type: NSK 5, Programmable for both
Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and
fully compatible with 40W fully programmable Carrier terminal Type :ETL- No. Nil 1
41, Make: ABB .
7 FSK Data Modem with stand alone 19" rack with power supply module
,Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to
2400 Baud) and VFT Channel Centre Frequency and fully compatible with No. 1 1
40W fully programmable Carrier terminal Type :ETL-41,
1 220kV DBB Hybrid switchgear module for 220kV line bay & 220/66 kV
No. 13 0
Transformer bay
2
220kV SBB Hybrid switchgear module for 220kV Bus Coupler bay No. 1 0
4 66kV DBB Hybrid Switchgear Module for 66kV line bay & (66kV side)
No. 10 0
220/66kV Transformer bay
5
66kV SBB Hybrid switchgear module for 66kV Bus Coupler bay No. 1 0
Note:
1) Any material/equipment accessories which are not listed in BOQ or in
scope of supply but required to
complete the job shall be included and shown in technical bid.
2)*Ethernet switches shall have as many spare ports as utilized ports.
3) ** PLCC/ FOTE BCU shall have sufficient I/Os as per given list.
4) # BCU for station Auxiliary shall have sufficient I/Os as per list or
otherwise suitable RTU shall be provided.
1) Supply & Erection of 220/66KV Transformer is not in the scope of awardee, but
awardee will erect the itmes other than the scope of transformer manufacturer and
witness during the erection and testing of the same and provide all the result in as built
drawings/documents.
2) Terminal Clamp & Connectors shall be provided as per, details of conductor shown in,
drawings of Layout Plan & Section.
3) The Connectors of the Bushings of 220 kV & 66 kV Hybrid Modules must be
compression type terminal connectors only.
4) 31mm/kV creepage distance is considered due to high pollution level of site.
5) The fabricated structures of gantries and equipments shall have a minimum overall
Zinc coating of 900 gm/sq. m of surface are except for plates and sections below 5 mm
which shall have a minimum overall Zinc coating 610/sq.m of surface area. The average
Zinc coating for all sections and plates 5 mm and above shall be maintained minimum
127 microns and that for plates and sections below 5 mm shall be aintained minimum 87
microns.
a Main Bus with 34.4 Mtr. Span including bus jumpers Span 2 2
ACSR Zebra Conductor per Span Rmtr. 206.4 206.4
Insulators-90KN AF Per Span No. 72 72
Double Tension H/W & Acc. With Turn Buckle suitable for
No.
Twin Zebra ACSR cond. & 90KN Insulator disc Per Span 3 3
Double Tension H/W & Acc. Without Turn Buckle suitable
for Twin Zebra ACSR cond. & 90KN Insulator disc Per No.
Span 3 3
Spacers suitable for Twin Zebra ACSR (350mm Spacing)
No.
Per Span 21 21
b Main Bus with 31.9 Mtr. Span including bus jumpers Span 2 2
ACSR Zebra Conductor per Span Rmtr. 191.4 191.4
Insulators-90KN AF Per Span No. 72 72
Double Tension H/W & Acc. With Turn Buckle suitable for
No.
Twin Zebra ACSR cond. & 90KN Insulator disc Per Span 3 3
Double Tension H/W & Acc. Without Turn Buckle suitable
for Twin Zebra ACSR cond. & 90KN Insulator disc Per No.
Span 3 3
Spacers suitable for Twin Zebra ACSR (350mm Spacing)
No.
Per Span 21 21
c Main Bus with 30.9 Mtr. Span including bus jumpers Span 4 4
ACSR Zebra Conductor per Span Rmtr. 185.4 185.4
Control
1 Room 8.8x8.5 4 300 0 3 4 3 2 0 2 1 1 1 1
Battery
2 Room 8.8x8.5 4 100 0 0 0 3 2 4 1 0 0 0 0
3 LV Room 8.8x8.5 4 150 0 0 2 2 2 0 1 0 1 0 1
PLCC
4 Room 9.8x5.5 4 300 0 2 2 2 2 0 1 0 1 1 0
Store
5 Room 5.8x5.5 4 100 0 0 2 2 1 0 0 0 0 0 0
Ramp
6 Slope 2x3.6 4 100 0 0 1 1 0 0 0 0 0 0 0
7 Veranda 2.0x17.9 2.5 70 0 0 0 2 0 0 0 0 0 0 0
8 Office 6.8x8.5 4 300 2 0 2 2 1 0 0 0 0 2 0
Toilet
9 Gens 2.2x1.5 4 70 0 0 0 1 0 1 0 0 0 0 0
10 WC 1.5x0.9 4 70 0 0 0 1 0 1 0 0 0 0 0
Toilet
11 Ladies 2.5x1.7 4 70 0 0 0 1 0 1 0 0 0 0 0
Passage
(Corridor
12 ) 15.8x2.8 4 70 0 0 0 2 0 0 0 0 1 0 0
Ramp
13 Slope 3.6x2 4 100 0 0 1 1 0 0 0 0 0 0 0
14 Veranda 6.2x2.1 2.5 70 0 0 0 2 0 0 0 0 0 0 0
B Quarters
TYPE-
B1 4(GROU
ND
Store
D Building 19x8.5 4 150 0 0 2 4 0 4 0 0 1 0 0
Note:
The area if not applicable as per layout of the project may
please be ignored.
Annexure- "D"
Supply of Furniture, RO Water Filter System, Water Cooler Etc.
Sr.
Particulars Quantity
No.
Furniture for 220KV S/S
a) Steel chair "S" type, Overhanging arm with cushion with cane
seat/back 1"X 16" gauge round pipe frame 3
Erection
Sr. Supply
Particulars of Item Unit PLCC requirement for 220KV Bays at Sub-station end (Laying/Installation,testin
No. Qty.
g &commissioning) Qty.
11 laying of 75 Ohm, unbalanced KM 3.3 0 0.55 0.55 0.55 0.55 5.5 5.5
armoured co-axial cable for PLCC
signal connectivity and providing
UHF gland on both the ends of each
main cable length to be laid for
PLCC carrier room to bay gentry
and loop cable for Ph to Ph coupling
arrangement.
12 PLCC Exchange preferably of No. 1 0 0 0 0 0 1 1
Make: MATRIX, Type Eternity 10S
with 16 Nos. of Trunks & 16 Nos. of
Subscribers suitable for both PLCC
Dialling and Express
Communication connectivity with
Universal slot architecture and Hot
stand by Power supply and CPU
along with the push button type
telephone instrument (8 Nos.) of
reputed make for subscribe
extension and Digital Key phone (4
Nos.) for express point to point
connectivity.
13 DAS Meters network wiring Job 1 0 0 0 0 0 0 1
complete up to RS 485 to RS 232
Convertor of DAS PC using
a) 3 core communication cable (as Mtr. As per As per actual requirement
per specification given hereunder) actual
require
CIVIL BOQ
Name of Work: - Construction of C.R. building, Structure & Equipment foundation, cable
trench Watchmen Cabin, Asphalt Road and ancillary civil works at 220KV Rahiyad (Suva)
s/s at Dahej Ta.Wagra Dist. Bharuch under Bharuch TR Circle.(Turnkey Work)
SR
No DESCRIPTION Qty Unit
1 Excavation for foundation up to 1.5m depth including soring out 16660.00 Cmt
and stacking of useful materials and disposing of the excavated
stuff upto any lead (A) dence or hard soil soil.
2 Excavation for foundation for depth from 1.5M to 3.0M including 3485.00 Cmt
soring out and stacking of useful materials and disposing of the
excavated stuff upto any lead (A)Dence or hard soil.
3 Excavation for foundation for depth from 3.0M to 5.0M including 20.00 Cmt
soring out and stacking of useful materials and disposing of the
excavated stuff upto any lead.(A) Dence or hard soil.
4 Filling in trenches with sand including watering ramming 2844.00 Cmt.
consolidation and dressing etc complete as directed by EIC.
5 Supplying & stacking 150 to200 mm size hard stonerubble 1380.00 Cmt.
black including transportation filling the box etc. complete. (box
measurement shall be paid with 25% void deduction)- For road
work.
6 Filling in plinth / trenches with yellow earth/ murrum of approved 3382.00 Cmt
quality brought from outside in layers not exceeding 200mm
thick layers including watering, ramming, consolidating etc.,
complete as directed by EIC.
7 Providing and laying cement concrete 1:4:8 (1 Cement : 4Course 3722.00 Cmt
sand : 8 black crushed stone aggregate 40mm nominal size )
and curing complete- Foundation and plinth.
8 Providing and laying cement concrete work of 1:2:4 (1- Cement 1264.00 Cmt
:2-Sand :4 C.Agg of 20mm size) and curing complete excluding
the cost of formwork and reinforcement in Foundations, footing
and base of columns and mass concrete
9 Providing & laying control cement concrete M-20 as per mix 2933.00 Cmt
design exposed work with curing etc. complete including the
cost of ply wood / steel sheathing form work & adjustable tubular
steel supports / Props.but excluding the cost of reinforcement.
For Foundation and footings (Min Cement Content is
320Kg/Cmt)
10 M20 as above but for column . 212.00 Cmt
11 M20 as above but for paradi 620.00 Cmt
12 M20 as above but for beam. 4.00 Cmt
13 M20 as above but for slab, chhajah, lintel 13.00 Cmt
31 Providing and laying polished Kota stone slab 25 mm th. in risers 52.00 Smt
of steps, Dado and sills laid on 10 mm thick CM 1:3 & jointed
with grey cement slurry including rubbing and polishing etc.
complete.
32 Providing and laying color glazed tiles- 120.00 Smt
JOHNSON/KAJARIA/NITTCO or its equivalent make 6mm thick
in flooring & dado laid on bed of 12mm thick cement mortar 1:3
(1 cement: 3 course sand) & fixing the same in cement &
providing 12mm thick back coating of cement plaster in CM 1:3
for base, filling the joints with white/color cement neatly finishing
the joints curing etc. complete.
33 Providing & fixing approved quality ceramic tiles (8mm thick) of 121.00 Smt
best quality matt/glossy finish of Johnson/Kajaria/Nittco or its
equivalent make of required size for flooring, skirting etc.
including fixing the same in cement mortar (1:2) setting with
ready made tile adhesive as recommended by manufacturer's
including fillings of joints mixed with pigmented cement slurry of
matching shade etc. complete - For battery room.
34 Providing and laying 24"x24" Vitrified 8mm thick tile flooring over 50.00 Smt
20mm (avg) base of cement mortar 1:6 (1-Cement:6 Sand) on
new surface or fixing on existing surface by adhesive material
including jointed with colour cement slurry including finished with
flush pointing and cleaning the surface etc complete for antiskid.
35 Providing & placing 60MM thick grey colour PAVER PRECAST 2170.00 Smt
CONCRETE BLOCK of approved quality size & shape in line &
level including fitting in 50MM AVERAGE THICK LAYER of
approved quality of RIVER SAND below CONCRETE BLOCK in
slope filling the joint of concrete.
37 Providing & fixing approved quality FRP door having FRP frame 10.00 Smt
of size 100x50mm & 28mm thick FRP shutter with Depressed
Panel shutter having extra reinforcement on side and edges and
in Gel coat finish. The core of the shutter is to be filled up with
injected fiber extinguishing grade polyurethane foam done in situ
along with embedded wooden pieces for stiffening and also for
fixing hinges and fixtures. The whole FRP frame and shutter is
to be water proof, weather proof, termite proof and resistance to
mild acid/Alkali resistance including SS hinges with necessary
screws and aluminum fixture and fastenings etc complete.
28mm th. shutter & 100x50mm frame.
40 Providing and fixing approved quality aluminum ventilator having 2.00 Smt
frame size 55x35mm having thickness 3mm & weighing
1.36kg/rmt approx standard aluminum extruded anodized frame
having panel of 5mm thick white/brown glass fixed horizontal
louvers in aluminum channel as per details drawings.
41 Providing and fixing approved quality rolling shutters of of 18 5.00 Smt
guage approved make made of 80mm wide M.S. Laths
interlocked together through their entire length and jointed
together at the ends by end locks mounted on specially designed
pipe shaft with bracket plates guide channels and arrangements
for inside locking with push pull operation complete including the
cost of hood cover & spring&oil painting etc. comp. (A) Shutter
having width below 3.5 meter.
Providing and fixing approved quality to wall, ceiling, floor &
trenches UPVC pipe of Dutron/Astral or its equivalent ISI make
and wall thickness of the following nominal bore tube fitting and
clamps of GI sheet at every one Metre Distance including making
good the wall, ceiling, floor & refilling trenches.
42 15 mm OD pipe 180.00 Rmt
43 25mm OD pipe 610.00 Rmt
44 40mm OD pipe 200.00 Rmt
45 50mmpipe OD pipe 320.00 Rmt
Providing & fixing approved quality gun metal check or non-
return wheel valve (ISI Make)
46 15mm dia. 2.00 No
55 Providing & fixing FINOLEX brand or equivalent approved quality 74.00 Rmt
rigid P.V.C. pipe for rain water including necessary fittings like
bends, shoe, cowl etc. & fixing the pipes to the wall in plumb by
means of G.I. Clamps of 18 gauge sheet at 1 to 1.5 meter
distance, filling the joints with approved solution complete as
directed by E.I.C.(A) 110 MM DIA O.D.P.V.C. pipe 2.5kg/cm2.
56 Providing and fixing approved quality ORISSA PAN water closet 3.00 No
squatting pan size 580mm including providing and fixing 100mm
size P or S trap jointing tap with the pan and soil waste pipe and
with G.I. inlet connection for flush pipe with W.C. pan and
chromium plated brass half turn flush cock of approved quality of
25mm dia etc. complete.
63 Providing & fixing Acrylic name plates of required size including 8.00 No
painting letters as directed & fixing as directed by E.I.C.
Providing and laying (to level or slopes) and jointing with stiff
mixture of cement mortar in proportion 1:1 approved quality salt
glazed stoneware pipes following nominal internal diameters
including testing of pipes and joints complete.
64 Do as above but 100mm dia 65.00 Rmt
65 Do as above but 150mm dia 135.00 Rmt
67 Providing and fabricating and erecting M.S.angle posts, racks & 16200.00 Kg
trays, covers for cable trench using structural steel angels,
sheets and flats etc. of approved steel manufacturer as per
drawing & design including fixing the angles /racks with the help
of the galvanised ISI fasteners of approved manufacturere with
the RCC etc.including three coats of oil painting etc. completed
as directed by EIC.(All materials required for the work to be
brought by the contractor).
68 Providing and Fixing 20 micron colour Anodised Partly panneled 40.00 Smt
& partly Glazed Alu.Partition using alu. Section
JINDAL/Hindalco/Banco aluminium Ltd. as per design out of
extruted tubuler hollow section approx size of partition frame
double groove (63.50x38.1x3.20 ,1.95 kg/rmt), partition frame
single groove ( 63.50x38.1x2.50 ,1.092 kg/rmt), glazing clip
(19x17.3x.1.2 ,154 kg/rmt), glazing strip/plate (44.45x5.72x3.22,
0.453 kg/rmt) including fixing upper part of partition with 5 mm
thk. plain/brown float glass or froasted glass as per design & of
approved quality (like modi gaurd/saint gobain) & lower part of
the partiton with 8 mm waterproof ply fixing with laminate sheet
both side of approved brand & colour (greenply/royal
touch/marino/century) with alu. glazing cleat and rubber
sealing/glass wool including necessary fittings like screws,
angles, cleat etc and filling with appropriete silicon sealent
between aluminium section members & wall/ceiling or any
surface gap between Wall & section etc. complete as per detail
drawing and instruction of EIC.
69 Labour charges for making molding edge to to marble/Kotah 50.00 Rmt
stone including all tools tackles, materials and labour etc.
complete as directed.
70 Providing and fixing cats iron spigot and socket soil, waste and 5.00 Rmt
ventilating pipes of 100mm dia.
71 Providing and fixing 75mm dia CI Cowl ventilator of light type. 4.00 No
(pwd/ch.23/it6)
74 Providing & fixing approved quality light type C.I. Manhole covers 4.00 No
with water tight C.I. Frame & fixing the same in concrete etc.
complete as directed by E.I.C.
(A) 600mm x 600mm.
75 Setting of template & foundation bolts in line and level before 600.00 No
concreting of foundation and making arrangement of fixing
template in such a way as it remains in position during concrete
etc. comp. As directed by EIC. Rate includes supplying and
fabricating of template from Mild steel as per template drawing
including all material, tools tackles & labours required for that. No
Extra payment for preparation of template will be given the
template such prepared will be the porperty of agency.
76 Providing and fixing to foundations and cable trenches wall 60 100.00 Rmt
grade 50mm dia HDPE 10 kg/cm2 pipe for the cable in line and
level as shown in the drawing and as directed by EIC. this work
includes cutting the core in to the RCC work by means of core
cutter as per the requirement of the cables and directed by the
EIC.
77 Providing and fixing to foundations and cable trenches wall 60 100.00 Rmt
grade 110mm dia HDPE 10 kg/cm2 pipe for the cable in line and
level as shown in the drawing and as directed by EIC. this work
includes cutting the core in to the RCC work by means of core
cutter as per the requirement of the cables and directed by the
EIC.100mm dia.
78 Supply, fabrication,cutting,threading of M.S rod including hot dip 10000.00 Kg
galvanizing the same of required size and length including 2 Nos
of nuts and pack/spring washers etc; complete as directed by
E.I.C
79 Supplying & stacking& spreading quary dust including 1200.00 Cmt
transportation for spreading on road /yard filling the box etc.
complete.Before spreading quarry dust doing micro leveling
including requiredcutting,filling,leveling the earth up to 150 to
200mm depth as directed by E.I.C.
96 Boring holes 4.50 M. deep in ordinary soil/Densr or hard soil (for 200.00 No
cast in situ piles) and disposal of the surplus excavated soil as
directed within a lead of 50 M. for following diameter of piles.500
mm Dia.
97 Boring holes 4.50 M. deep in ordinary soil/Densr or hard soil (for 100.00 No
cast in situ piles) and disposal of the surplus excavated soil as
directed within a lead of 50 M. for following diameter of piles.400
mm Dia
103 Providing & fixing sliding gate of 40 mm dia mild steel pipe B 15.00 Smt
class all round and 20 mm dia Mild steel pipe at 200 mm C/C and
12mm Mild steel square bars at 200 mm C/C alternatively
(i.e.One between two pipes) vertically welded to 40 mm dia pipe
frame as per drawing and design with necessary brackets,hold
fasts,locking arrangement on top & aldrop on both the side
including base rail for sliding the gate having ball bearing rollers
& guide tracks of 50x6mm M.S. flat with hold fast, fabrication of
side supports including fixing GETCO letter on front side
etc.comp.With three coats of approved oil painting & one coat of
red oxide primer as directed by EIC (The cost does not include
the cost of reinforcement, column, support,joints, concrete
masonry work.