Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Print ISSN: 2349-8404; Online ISSN: 2349-879X; Volume 1, Number 4 ; August, 2014 pp. 8 13
Krishi Sanskriti Publications
http://www.krishisanskriti.org/jceet.html
4.5. Mineral Admixture-Silica Fume Dosage GLENIUM B233 dosage ranges from
Silica fume (very fine amorphous silica particle < 1 500ml to 1500ml per 100 kg of cementitious material is
m) and superplasticizer are complementary materials to normally recommended. Figure 1 shows the manufacture
manufacture self levelling concretes with great cohesion of pack of GLENIUM B233 from BASF Chemicals.
fresh mix.
Journal of Civil Engineering and Environmental Technology
Print ISSN: 2349-8404; Online ISSN: 2349-879X; Volume 1, Number 4; August, 2014
Development of High Strength Self Compacting Concrete Using Mineral And Chemical Admixture 10
SLUMP VALUE
710 710
4 437.29 66.26 8.06 2.52
700 700
5 445.86 67.56 8.21 2.57 690 690
685
680
6 454.78 68.91 8.38 2.62 670
660
Mix 1 Mix 2 Mix 3 Mix 4 Mix 5 Mix 6
Table 6.2 Mix proportioning 2 TRIAL MIXES
730 730
Slump U- L- V- J- 720 720
ID 710 712
flow Box Box Funnel Ring
700
1 735 10 0.98 6.9 1
690
2 725 13 0.96 7 2 680
3 710 15 0.93 7.32 4 Mix 1 Mix 2 Mix 3 Mix 4 Mix 5 Mix 6
TRIAL MIXES
4 700 17 0.9 7.58 5
5 690 19 0.88 8.02 6 Chart 3Slump Value mix without VMA.
6 685 21 0.86 8.96 7
7.2.1Test Results on Hardened Concrete VMA mix 7.2.2 Test result for mix without VMA Addition
Flexural Flexural
ID Compressive Strength N/mm2 Strength ID Compressive Strength N/mm2 Strength
test test
7 Days 14 Days 28 Days 28 Days 28
6.8 7 Days 14 Days 28 Days
1 42.15 50.87 61.33 Days
6.92 1 41.86 47.96 60.75 7.52
2 45.34 55.23 64.24
2 43.02 49.12 63.07 7.73
3 50.58 59.42 66.22 7.29
3 44.47 50.29 65.98 7.88
4 53.63 61.04 68.02 7.52 4 45.34 52.61 66.85 8.05
8 5 47.38 54.06 68.89 8.15
5 54.06 61.48 69.32
6 54.5 63.22 72.96 8.43 6 48.83 55.81 70.92 8.32
Table 9 Compressive and Flexural strength test result Table 11 Compressive and flexural strength test results
@28 Days
72
66
70
64
68
62
28 Days
66
64 60
62 0.33 0.34 0.35 0.36 0.37
60
W/C Ratio
0.33 0.34 0.35 0.36 0.37 Chart 5 Compressive Strength Vs W/C ratio
W/C Ratio
Split Tensile test was carried out by cylinder specimen of 7 Days 14 Days 28 days
diameter 150mm, height 300 mm. 1 1.94 2.64 3.82
2
ID Split Tensile test N/mm 2 2.08 2.78 4.02
7 Days 14 Days 28 days 3 2.2 2.91 4.16
1 1.25 2.64 3.89 4 2.44 3.05 4.3
2 1.67 3.05 4.58 5 2.58 3.19 4.58
3 2.08 3.19 4.72 6 2.74 3.47 4.86
4 2.22 3.33 5.14
5 Table 12 Split tensile test results
2.5 3.47 5.28
6 2.64 3.89 5.42
Table 10 Split tensile test results (VMA mixes)