Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Description
EN EN EN EN
New - test
50119 Railway applications - Fixed installations - Electric traction overhead contact lines
50121-4
the signalling and telecommunications apparatus
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of
EN
50121-5
fixed power supply installations and apparatus
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
EN
50122-1
- Part 1: Protective provisions against electric shock
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
EN
50122-2
- Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
EN
50122-3
- Part 3: Mutual Interaction of a.c. and d.c. traction systems
Railway applications - Fixed installations - D.C. switchgear - Part 3: Indoor d.c.
EN
50123-3
disconnectors, switch-disconnectors and earthing switches
Railway applications - Fixed installations - D.C. switchgear - Part 4: Outdoor d.c.
EN
50123-4
disconnectors, switch-disconnectors and earthing switches
50123-7-1
control and protection devices for specific use in d.c. traction systems - Application guide
50123-7-2 control and protection devices for specific use in d.c. traction systems - Isolating current
transducers and other current measuring devices
Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement,
EN
50123-7-3 control and protection devices for specific use in d.c. traction systems - Isolating voltage
transducers and other voltage measuring devices
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances
EN
50124-1
and creepage distances for all electrical and electronic equipment
Railway applications - Insulation coordination - Part 2: Overvoltages and related
EN
50124-2
protection
Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and
EN
50125-1
on-board equipment
Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical
EN
50125-2
installations
Railway applications - Environmental conditions for equipment - Part 3: Equipment for
EN
50125-3
signalling and telecommunications
50126-1
Maintainability and Safety (RAMS) - Part 1: Basic requirements and generic process
50128
railway control and protection systems
Railway applications - Fixed installations - Electric traction - Copper and copper alloy
EN
50149
grooved contact wires
Railway applications - Fixed installations - Electric traction - Special requirements for
EN
50151
composite insulators
50152-1
switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV
50152-2 switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage
above 1 kV
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
EN
50152-3-1 Part 3-1: Measurement, control and protection devices for specific use in a.c. traction
systems - Application guide
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
EN
50152-3-2 Part 3-2: Measurement, control and protection devices for specific use in a.c. traction
systems - Single-phase current transformers
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
EN
50152-3-3 Part 3-3: Measurement, control and protection devices for specific use in a.c. traction
systems - Single-phase inductive voltage transformers
EN
50162 Protection against corrosion by stray current from direct current systems
EN EN
50163 Railway applications - Supply voltages of traction systems
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1:
50206-1
Pantographs for main line vehicles
EN Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2:
50206-2
Pantographs for metros and light rail vehicles
Railway applications - Testing of rolling stock after completion of construction and before
EN
50215
entry into service
Railway applications - Compatibility between rolling stock and train detection systems -
EN
50238-1
Part 1: General
Railway applications - Compatibility between rolling stock and train detection systems -
EN
50238-2
Part 2: Compatibility with track circuits
EN EN EN
50239 Railway applications - Radio remote control system of traction vehicle for freight traffic
50317
measurements of the dynamic interaction between pantograph and overhead contact line
50318
interaction between pantograph and overhead contact line
Railway applications - Fixed installations - Harmonization of the rated values for converter
EN
50327
groups and tests on converter groups
EN EN EN
50328 Railway applications - Fixed installations - Electronic power converters for substations
50367
between pantograph and overhead line
Railway Applications - Power supply and rolling stock - Technical criteria for the
EN
50388 coordination between power supply (substation) and rolling stock to achieve
interoperability
Railway applications - Current collection systems - Pantographs, testing methods for
EN 50405
carbon contact strips
Effects of electromagnetic interference on pipelines caused by high voltage a.c electric
EN
50443
traction system, and/or high voltage a.c power supply systems
Railway applications - Fixed installations - D.C. surge arresters and voltage limiting
EN
50526-1
devices - Part 1: Surge arresters
Railway applications - Fixed Installations - D.C. surge arresters and voltage limiting
EN
50526-2
devices - Part 2: Voltage limiting devices
Railway applications - Fixed installations - Harmonisation of the rated values for converter
EN
50527
groups and tests on converter groups.
EN EN EN EN
50528 Railway applications - Fixed installations - Electronic power converters for substations
50546
vehicles
Railway applications - Fixed installations - Process, measures and demonstration of safety
IEC IEC IEC IEC EN
50562
for electric traction systems
60038 IEC standard voltages
IEC
60349-2
convertor-fed alternating current motors
Electric traction - Rotating electrical machines for rail and road vehicles - Part 3:
IEC
60349-3 Determination of the total losses of convertor-fed alternating current motors by
summation of the component losses
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4:
IEC
60349-4
Permanent magnet synchronous electrical machines connected to an electronic converter
60364-1
general characteristics, definitions
Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1:
60494-1
Pantographs for main line vehicles
60529 Degrees of protection provided by enclosures (IP code)
60913 Railway applications - Fixed installations - Electric traction overhead contact lines
61936-2 Power installations exceeding 1 kV a.c. and 1,5 kV d.c. - Part 2: d.c.
61992-7-1
and protection devices for specific use in d.c. traction systems - Application guide
61992-7-2 and protection devices for specific use in d.c. traction systems - Isolating current
transducers and other current measuring devices
Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control
IEC
61992-7-3 and protection devices for specific use in d.c. traction systems - Isolating voltage
transducers and other voltage measuring devices
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
IEC
62128-1
- Part 1: Protective provisions relating to electrical safety and earthing
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
IEC
62128-2
- Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC
62128-3
- Part 3: Mutual interaction of a.c. and d.c. traction systems
62236-1 Railway applications - Electromagnetic compatibility - Part 1: General
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole
62236-2
railway system to the outside world
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of
62236-5
fixed power supply installations and apparatus
Railway applications - Power supply and rolling stock - Technical criteria for the
62313
coordination between power supply (substation) and rolling stock
Safety requirements for secondary batteries and battery installations - Part 3: Traction
62485-3
batteries
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances
62497-1
and creepage distances for all electrical and electronic equipment
Railway applications - Insulation coordination - Part 2: Overvoltages and related
62497-2
protection
Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical
62498-2
installations
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
62505-1
Part 1: Single-phase circuit-breakers with Un above 1 kV
62505-2
Part 2: Single-phase disconnectors, earthing switches and switches with Un above 1 kV
62505-3-1 Part 3-1: Measurement, control and protection devices for specific use in a.c. tractions
systems - Application guide
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
IEC
62505-3-2 Part 3-2: Measurement, control and protection devices for specific use in a.c. traction
systems - Single-phase current transformers
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
IEC
62505-3-3 Part 3-3: Measurement, control and protection devices for specific use in a.c. traction
systems - Single-phase inductive voltage transformers
Railway applications - Electric traction - Short-primary type linear induction motors (LIM)
IEC
62520
fed by power converters
Railway applications - Fixed installations - Electric traction - Specific requirements for
1653.3-2012 IEEE Guide for Rail Transit Traction Power Systems Modeling
IEEE Standard for DC Traction Power System Field Testing and Acceptance Criteria for
1653.4-2009
System Applications up to 1500 V DC Nominal
IEEE Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in
1653.6-2013
Traction Power Distribution Facilities
IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear -
C37.20.1b-2006 Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC
Traction Power Switchgear
Electrically propelled road vehicles - Test specification for lithium-ion traction battery
ISO
12405-1
packs and systems - Part 1: High-power applications (ISO 12405-1:2011, IDT)
Electrically propelled road vehicles - Test specification for lithium-ion traction battery
ISO
12405-2
packs and systems - Part 2: High-energy applications (ISO 12405-2:2012, IDT)
Electrically propelled road vehicles - Test specification for lithium-ion traction battery
ISO
12405-3
packs and systems - Part 3: Safety performance requirements (ISO 12405-3:2014, IDT)
7622-1
elongation
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile
7622-2
strength
ISO ISO
ISO 1044 Industrial trucks - Lead-acid traction batteries for electrical trucks - Preferred voltages
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation
ISO 7622-1
(ISO 7622-1:2013)
Keywords Comments
fixed installations, safety, earthing, grounding, return circuit, protection, shock ASP
fixed installations, safety, earthing, grounding, return circuit, dc, traction system, stray current ASP
fixed installations, safety, earthing, grounding, return circuit, ac, dc, traction system, interaction ASP
fixed installations, dc, switchgear, measurement, control protection, traction systems, guide ASP
machines, vehicles, ac, variable frequency, converter, PMSM, permanent magnet, synchronous ASP
fixed installations, safety, earthing, grounding, return circuit, dc, traction system, stray current ASP
fixed installations, safety, earthing, grounding, return circuit, ac, dc, traction system, interaction ASP
low voltage, circuit breaker, switchgear, dc, traction, control, auxilliary ASP