0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
41 visualizzazioni4 pagine
Dual Editors - Conversational and G-code - switchable from one mode to the other another in 5 seconds. 32 bit Motorola 68030 Microprocessor 10.6" Monochrome or Color LCD Monitor Alphanumeric Industrialized keyboard.
Dual Editors - Conversational and G-code - switchable from one mode to the other another in 5 seconds. 32 bit Motorola 68030 Microprocessor 10.6" Monochrome or Color LCD Monitor Alphanumeric Industrialized keyboard.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato PDF, TXT o leggi online su Scribd
Dual Editors - Conversational and G-code - switchable from one mode to the other another in 5 seconds. 32 bit Motorola 68030 Microprocessor 10.6" Monochrome or Color LCD Monitor Alphanumeric Industrialized keyboard.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato PDF, TXT o leggi online su Scribd
Dual Editors – Conversational & G-code - switchable from one mode to the other another in 5 seconds.
CNC and Programming Features
Hardware Interpolation
• 32 bit Motorola 68030 Microprocessor * 50 plus block look ahead (G51)
• 10.6” Monochrome or Color LCD Monitor * Rapid linear interpolation (G00) • Alphanumeric Industrialized keyboard * Feed linear interpolation (G01) • Open architecture * Circular interpolation • Pulse width modulated power supply * XZ Simultaneous • Built in PLC * Thread cutting • RS 232 Serial Port (38,400 bauds) • 24 Meg Mem card Machining Conditions • Battery backed RAM memory • Graphic coprocessor • Programmable dwells • 40 optoisolated digital inputs • Feedrate in inches per minute • 24 optoisolated digital outputs • Automatic round corner programming • 8 analog inputs • Feedrate in inches per revolution • 8 analog outputs • Automatic square corner programming • Automatic input voltage sensing • Constant tool surface speed • Digital probe input (TTL or 24V) • Programming in inches or metric • Output protection against overload, short • Constant RPM circuits and over voltage • Programming in absolute or incremental • Feedback ports for each axis plus spindle encoder and electronic handwheel Canned Cycles • Pattern repeating cycle • EFHOLD- Enable feed hold • Turning cycle with arcs • DFHOLD-Disable feed hold • Stock removal cycle on X axis • GOTO-Jump to a label • Facing cycle with arcs • RPT-Repeat program blocks • Stock removal cycle on Z axis • SUB-Define a subroutine • Longitudinal thread cutting cycles • RET-End of subroutine • Turning cycle with straight sections • CALL-Call to a subroutine • Face thread cutting cycles • PCALL-Call to a parametric subroutine • Facing cycle with straight sections • MCALL-Modal call to a subroutine • Grooving cycle along X axis • MDOFF-deactivate modal subroutine • Deep hole drilling • IF, ELSE- Conditional execution • Grooving cycle along Z axis • OPEN-Open program • WRITE-Write program blocks • ERROR- Display error msg., stop Tool Compensation program • MSG-Display error msg. w/o stopping • Tool wear Compensation program • Tool nose radius compensation • In addition to the above, there are hundreds • Tool nose orientation location codes of other mnemonics for sine, cosine, tangent, arc sine, arc tangent, decimal logarithm, plus complete sets of mnemonics Geometric Assistance for feedrate, spindle speeds, PLC commands, keyboard simulation, tools, • Arc tangent to previous path work zones and many other functions. • Arc defined by three points Virtually any mathematical or control • Mirror image function may be executed with M00- • Automatic radius blending Program stop mnemonics. • Tangential entry • Tangential exit Programming • Automatic chamfer blending • Part scaling (in part or whole) • DNC (RS232) • Programming in absolute arc center • Geometric help coordinates • Execution mode • MDI mode (Manual Data Input) • Teach-in mode Coordinate Systems • Play back mode • Single block mode • Main plane selection • Manual mode • Individual plane selections • Background editing mode • Definition of lower work area limits • Automatic tool calibration mode • Definition of upper work area limits • Tool inspection mode with auto-return • Zero offsets and auto-deletion of offsets • Mid program start • Automatic machine home reference • Programmable spindle speed • Probing • Number of main programs: 999,999 *3 • Presets of coordinate values • Number of nesting levels: 15 • Preset of polar origin • Repeat of sections of program • Zero offsets High Level Mnemonics • Feedrate: 0.00001 to 7900 inches/min. • Machining canned cycles in all planes • ESBLK-Enable single block mode • User defined canned cycles • DSNLK-Disable single block mode • On board graphic editor • ESTOP- Enable cycle stop • Override control for feedrate and spindle • DSTOP- Disable cycle stop • Editing in CNC language (ISO), High- • Position and following error (axis lag) Level, Profile Editor and Interactive Editor • Parts simulation graphics with 3D, zoom, • Interactive editor conversational type data and up to four simultaneous views. entry • Comments included in the part program and • Assisted help mode for all programming name commands • Open architecture software allows for the • Number of repetitions of standard, customization of specific applications, by parametric and modal subroutines: 9999 creating intelligent editors, custom screens • Parametric programming for: mathematical and utilizing the on-board graphic editor operations, conditional jumps and which allows creation of pages, symbols and unconditional jumps. Includes 200 global windows. parameters plus 27 local parameters times 7 • 7 languages are available. They include levels. English, Spanish, French, Italian, German, Dutch and Portuguese. Diagnostics Tables • Over temperature alarms • Zero offset tables • Complete hardware fault alarms • Tool offset tables • Software travel limits • Tool and tool magazine tables • Complete software fault alarm diagnostics • Global and arithmetic parameter tables • Individual program travel limits • Machining parameters and tables are stored • Input/output status in non-volatile memory • Programmable program error messages • Programmable PLC messages M-Functions • Logic analyzer for the PLC: real time monitoring of up to 8 PLC signals M01 - Conditional program stop simultaneously M02 - End of program • Interface errors (feedback, servo system, M03 - Clockwise spindle rotation external emergencies, etc.) M04 - Counter clockwise spindle • Transmission errors with peripherals (such rotation as PC, floppy disk drives, etc.) M05 - Spindle stop M06 - Tool change M08 - Coolant on Compensation: M09 - Coolant off M19 - Spindle orientation • Lead screw backlash compensation M30 - End of program, return to first block • Lead screw error compensation (up to 255 M41-44 Spindle speed ranges points per axis) M45 - Auxiliary spindle or live tool • Lead screw compensation allows slopes up M0…. 9999 - User defined M codes for any to 45 degrees use (i.e. for flood or mist coolant, bar feeding, etc.) • Laser beam sag and axis skew compensation Display (3 tables) • Compensation for tool length, radius and • 11” Monochrome LCD wear • Solid graphics w/ zoom in, out and around • Machine acceleration and deceleration: linear and bell shaped • Display of execution time • Display of parts counter • Hour and date with battery backup Solid Graphics: • Display of parameter values • Single block/Continuous cycle Allows the operator to see the part being formed graphically at any time during a Simulation or Execution mode