Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
15
Model 447.6/7
Vehicle with steering wheel buttons and without ASSYST
Model 448.7
Vehicle with steering wheel buttons and without ASSYST
G00.20-3160-11
Dialing
1 Close doors
2 Turn key in ignition switch to position "1" The standard display (total distance) must
appear in the multifunction display (6), if
necessary press the "Scroll forward" button (4)
repeatedly.
3 Repeatedly press "System selection" button "Trip" remains selected for approx. 5 s.
(1) until menu item "Trip" is highlighted in Operation step 4 must be carried out within
multifunction display (6) this time.
4 First press and hold down "Accept call" The multifunction display (6) shows the
button (2) and then, within 1 second, also Workshop menu with the "Vehicle data",
press and hold down "OK" button (3) for "Dynamometer test" and "ASSYST PLUS"
approx. 5 seconds tabs.
On vehicles with fixed maintenance intervals,
without ASSYST maintenance computer,
"ASSYST PLUS" also appears in the display.
5 Press the "Scroll forward" button (4)
repeatedly until "ASSYST PLUS" is highlighted
and confirm selection with the "OK" button (3)
Read out maintenance data
6 Select "Service data" tab and confirm with
"OK" button (3)
7 Note down the service code (e.g. "A") which
appears in the multifunction display (6)
8 Press "Scroll forward" button (4) repeatedly
and read out remaining time, remaining
distance and oil data record (e.g. "01 1F 00")
9 Note down the read-out data
10 Press "Exit menu" button (5) repeatedly until
standard display (total distance) appears in the
multifunction display (6)
Reset service data
11 Turn key in ignition lock to position "2" Only on model 447.6/7 with engine 622
12 Press "System selection" button (1) repeatedly
until workshop menu with "Vehicle data",
"Dynamometer test" and "ASSYST PLUS"
tabs appears in multifunction display (6)
13 Press the "Scroll forward" button (4) The workshop menu with the "Service
repeatedly until "ASSYST PLUS" is highlighted data", "Full service" and "Oil measurement"
and confirm selection with the "OK" button (3) tabs appears in the multifunction display (6).
14 Press the "Scroll forward" button (4) The multifunction display (6) then shows,
repeatedly until "Full Service" is highlighted e.g. "Service A" and "Confirm with OK".
and confirm selection with the "OK" button (3)
Daimler AG, 8/8/16, G/07/16, ap00.20-s-0042eb, Reset service indicator Page 1 of 2
Model 447.6/7 Vehicle with steering wheel buttons and without ASSYST Model 448.7 Vehicle with steering wheel buttons and without ASSYST
15 Confirm with "OK" (3) button The multifunction display (6) shows the oil
selection.
16 Select specification of used engine oil using The multifunction display (6) then shows
"Scroll forward" button (4) and confirm "Service conducted".
selection with "OK" button (3)
To achieve the maximum kilometer interval
with engine 274.
17 Press "Scroll forward" button (4) until "Yes" is "Reversal not possible" appears on the
highlighted, and confirm selection with "OK" multifunction display (6).
button (3)
18 Press "Scroll forward" button (4) until "Full service completed" appears on the
"Confirm" is highlighted, and confirm selection multifunction display (6).
with "OK" button (3)
If the service is not performed or only partly
performed after resetting the maintenance
computer.