Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 1.0
English
Zipp10 Series - 1 -
Installation Guide 2013 GeoMax AG, Widnau, Switzerland
Tablet of Contents
1 I NTRODUCTION .............................................................................. 3
Zipp10 Series - 2 -
Installation Guide 2013 GeoMax AG, Widnau, Switzerland
1 I NTRODUCTION
This guide provides complete step-by-step instructions for preparing the Zipp10 Pro total
station series for measuring work.
The latest versions of GeoMax documents and software referred to in this document are
all available from the GeoMax Parner Area in the Zipp10 Pro folder at www.geomax-
positioning.com/partner-area
Only the tasks required for the initial setup are described in this document. For further
information regarding the operation of the Zipp10, please refer to the respective manuals.
The Zipp10 Quick Guide is included with the container set. The comprehensive User
Manual is available from the included USB stick and also from GeoMax Partner Area in the
Zipp10 folder at www.geomax-positioning.com
Zipp10 Series - 3 -
Installation Guide 2013 GeoMax AG, Widnau, Switzerland
To customize the instrument for personel requirements, the firmware file in the required
language and coordinate order should be installed. The respective files can be obtained
from Geomax Partner Area in the Zipp10/Firmware folder and are in the format
Zipp10_XX_ENH.fw or Zipp10_XX_NEH.fw where XX indicates the language.
Choose either ENH or NEH depending on the coordinate order display required. The
firmware files also contains all available applications.
Note: Ensure that a fully charged battery is inserted when uploading firmware. This
process can take some time and the power supply must NOT be interrupted during the
loading process.
Zipp10 Series - 4 -
Installation Guide 2013 GeoMax AG, Widnau, Switzerland