Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Pantalla anterior
Desarmado y Armado
D9T Track-Type Tractor Power Train
Nmero de medio -RENR7471-04 Fecha de publicacin -01/02/2011 Fecha de actualizacin -03/02/2011
i03381859
Track - Separate
SMCS - 4170-076
Separate Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
4C-6486 Stand 2
8S-8048 Saddle 2
A
8S-7615 Pin 2
8S-7621 Tube 2
B 260-9412 Chain As 1
Personal injury can result from the track roller frame falling.
The track roller frame can fall if the eyebolts are installed in the pins.
The pins can come out of the track roller frame if the pins are used to
lift the roller frame.
Install the eyebolts in the track roller frame as shown to prevent injury.
Personal injury can result from performing service on the track roller
frame.
Personal injury can result from the track coming off of the roller frame.
The track can move off the track roller frame very quickly when a
separation of the track is made.
Keep away from the front of the machine when the track is removed
from the track roller frame.
Illustration 1 g01114544
Illustration 2 g01097225
3. Move the track until master link (5) is just above the centerline of rear idler (4) . Put suitable
blocks under the grouser bar just below master link (5) . Move the track to the rear until the
track is in contact with the suitable blocks.
4. Attach Tooling (B) to track shoe (7) . Remove bolts (6) and track shoe (7) . The weight of
track shoe (7) is approximately 45 kg (100 lb). Discard bolts (6) . Separate master link (5) .
Illustration 3 g01096414
6. Turn the final drive in a forward direction and permit track (8) to walk forward while track
(8) is supported by Tooling (B) .
Copyright 1993 - 2011 Caterpillar Inc. Thu Sep 22 14:06:53 UTC-0400 2011
Todos los derechos reservados.
Red privada para licenciados del SIS.