Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
RWEYQ-PYDN
3 phase
460V, 60Hz
Specifications, designs and other content appearing in this brochure are current as of January 2014 but subject to change without notice.
RWEYQ-PTJU (208/230V)
RWEYQ-PYDN (460V)
Heat Pump / Heat Recovery
1. Specifications ..............................................................................................2
1.1 RWEYQ-PTJU.............................................................................................. 2
1.2 RWEYQ-PYDN............................................................................................. 8
2. Dimensions ...............................................................................................14
3. Service Space ...........................................................................................15
4. Piping Diagrams........................................................................................16
5. Wiring Diagrams........................................................................................17
6. Field Wiring ...............................................................................................20
6.1 Heat Recovery............................................................................................ 20
6.2 Heat Pump ................................................................................................. 21
7. Electric Characteristics..............................................................................22
8. Capacity Table (Reference Data)..............................................................24
8.1 Cooling Capacity ........................................................................................ 24
8.2 Heating Capacity ........................................................................................ 78
8.3 Antifreeze Correction Factor .................................................................... 132
8.4 Capacity Correction Factor....................................................................... 133
9. Operation Limits ......................................................................................136
9.1 Heat Pump ............................................................................................... 136
9.2 Heat Recovery.......................................................................................... 137
10.Operation Limits (Antifreeze Usage) ....................................................... 138
10.1 Heat Pump ............................................................................................... 138
10.2 Heat Recovery.......................................................................................... 139
11.Sound Levels (Reference) ...................................................................... 140
11.1 Overall ...................................................................................................... 140
11.2 Octave Band Level ................................................................................... 140
12.Accessories............................................................................................. 141
12.1 Optional Accessories................................................................................ 141
1. Specifications
1.1 RWEYQ-PTJU
Model Name RWEYQ72PTJU
Power Supply 3 phase, 208/230V, 60Hz
Nominal 72,000
1 Cooling Capacity Btu / h
Rated 69,000
Nominal 81,000
2 Heating Capacity Btu / h
Rated 77,000
Casing Color Ivory White (5Y7.5/1)
Dimensions: (HWD) in. (mm) 39-3/830-3/421-11/16 (1,000780550)
Heat Exchanger Stainless Steel Plate Type
Type Hermetically Sealed Scroll Type
Displacement ft3/h 395
Compressor Number of Revolutions r/min 5,280
Motor Output kW 3.6
Starting Method Soft Start
Liquid Pipe in. (mm) 3/8 (9.5) C1220T (Flare Connection)
Suction Gas Pipe in. (mm) 3/4 (19.1) C1220T (Brazing Connection) 3
Connecting Discharge Gas Pipe in. (mm) 4 5/8 (15.9) C1220T, 5 3/4 (19.1) C1220T (Brazing Connection)
Pipes Water inlet 1-1/4 FPT Female Thread
Water outlet 1-1/4 FPT Female Thread
Drain outlet 1/2 FPS Female Thread
Mass Lbs (kg) 330 (150)
Sound Level (Reference Value) dBA 50
Safety Devices High Pressure Switch, Inverter Overload Protector, Fusible Plug
Capacity Control % 23~100
Refrigerant Name R410A
Refrigerant Charge Lbs (kg) 9.9 (4.5)
Control Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Connection Pipes, Clamps, Conduit Mounting Plate
Drawing No. C: 4D066036C
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 25ft (7.6m) for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 25ft (7.6m)
for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 25ft (7.6m) for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 25ft (7.6m)
for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW2
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW2
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW3
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW3
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
1.2 RWEYQ-PYDN
Model Name RWEYQ72PYDN
Power Supply 3 phase, 460V, 60Hz
Nominal 72,000
1 Cooling Capacity Btu / h
Rated 69,000
Nominal 81,000
2 Heating Capacity Btu / h
Rated 77,000
Casing Color Ivory White (5Y7.5/1)
Dimensions: (HWD) in. (mm) 39-3/830-3/421-11/16 (1,000780550)
Heat Exchanger Stainless Steel Plate Type
Type Hermetically Sealed Scroll Type
Displacement ft3/h 395
Compressor Number of Revolutions r/min 5,280
Motor Output kW 3.6
Starting Method Soft Start
Liquid Pipe in. (mm) 3/8 (9.5) C1220T (Flare Connection)
Suction Gas Pipe in. (mm) 3/4 (19.1) C1220T (Brazing Connection) 3
Connecting Discharge Gas Pipe in. (mm) 4 5/8 (15.9) C1220T, 5 3/4 (19.1) C1220T (Brazing Connection)
Pipes Water inlet 1-1/4 FPT Female Thread
Water outlet 1-1/4 FPT Female Thread
Drain outlet 1/2 FPS Female Thread
Mass Lbs (kg) 343 (156)
Sound Level (Reference Value) dBA 50
Safety Devices High Pressure Switch, Inverter Overload Protector, Fusible Plug
Capacity Control % 23~100
Refrigerant Name R410A
Refrigerant Charge Lbs (kg) 9.9 (4.5)
Control Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Connection Pipes, Clamps, Conduit Mounting Plate
Drawing No. C: 4D079926B
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 25ft (7.6m) for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 25ft (7.6m)
for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 25ft (7.6m) for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 25ft (7.6m)
for ducted indoor units, 50ft (15.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW2
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW2
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.64kW3
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
Notes:
1. 1 Indoor temp.: 80.6FDB (27CDB), 66.2FWB (19CWB)/inlet water temp.: 86F (30C)
Equivalent piping length: 50ft (15.5m) for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
2 Indoor temp.: 68FDB (20CDB), 59FWB (15CWB)/inlet water temp.: 68F (20CDB)/Equivalent piping length: 50ft (15.5m)
for ducted indoor units, 100ft (30.5m) for non-ducted indoor units, level difference: 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room, etc).
3. Hold ambient condition at 35~104F (2~40C), ~80%RH
Heat rejection from the casing: 0.71kW3
4. There are some cases where capacity decreases depending on operating states.
5. It is necessary to install a strainer (field supply) on the inlet of each condensing unit.
2. Dimensions
RWEYQ72PTJU / RWEYQ84PTJU
RWEYQ72PYDN / RWEYQ84PYDN Unit: in. (mm)
3D066053B
3. Service Space
RWEYQ72PTJU / RWEYQ84PTJU
RWEYQ72PYDN / RWEYQ84PYDN Unit: in. (mm)
3D066039A
4. Piping Diagrams
RWEYQ72PTJU / RWEYQ84PTJU
RWEYQ72PYDN / RWEYQ84PYDN
4D066041A
5. Wiring Diagrams
RWEYQ72PTJU / RWEYQ84PTJU
C: 3D065922C
C: 3D073330
RWEYQ72PYDN / RWEYQ84PYDN
3D078285A
6. Field Wiring
6.1 Heat Recovery
3D066054B
3D066049A
7. Electric Characteristics
RWEYQ72PTJU / RWEYQ84PTJU / RWEYQ144PTJU / RWEYQ168PTJU / RWEYQ216PTJU / RWEYQ252PTJU
3D066048B
3D079928A
3D066046A
RWEYQ84PTJU / RWEYQ168PTJU
RWEYQ84PYDN / RWEYQ168PYDN
3D066052A
RWEYQ144PTJU
RWEYQ144PYDN
3D066111A
9. Operation Limits
9.1 Heat Pump
3D066042B
3D066043B
3D079067B
3D079068B
dB(A)
Power Supply TJ: 208/230V, 60Hz
YD: 460V, 60Hz
Model
RWEYQ72PTJU
50
RWEYQ72PYDN
RWEYQ84PTJU
RWEYQ84PYDN 51
C: 4D055414A C: 4D055415A
12. Accessories
12.1 Optional Accessories
3D066050C
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
RWEYQ-PYDN
3 phase
460V, 60Hz
Specifications, designs and other content appearing in this brochure are current as of January 2014 but subject to change without notice.