Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Key Features
Single Phase - 2P
Three Phase - 3P and 4P
High Energy Handling Capacity
Quick Response Time
Low let-thru Voltage
Compliant to IEC, VDE standards installation against the effects of direct lightning
and surge, and is installed on the main power supply
system, such as the service entrance, forming the
Application & Installation boundary of lightning protection zone 0A to LPZ1
within the Lightning Protection Zones Concept; A
The ProM series Class II arresters are designed for
typical application for surge arresters of Class II against
limiting surge in low-voltage installations. They also
the effect of surge caused by atmospheric discharge or
protect subsequently arranged installations and
switching transients is, at the sub-distribution board of
equipment against surge caused by power switching,
low-voltage installations forming the boundary from
ground potential rise, induced lightning electro-
LPZ 1 to LPZ2; And the application of surge arresters
magnetic pulses. Generally, a Class I surge protection
of Class III is for protection of sensitive equipments
device is used for protecting the low-voltage
against surge, installed at LPZ2 to LPZ3.
Figures 1 ~ 4 show the suggested circuit diagrams for the installation of arresters. The earthing conductor
is to be connected to earth bus bar of the circuit being protected via the shortest possible path.
w w w. p r o t e c - p o w e r. c o m
Technical Data Sheet
Product Complied:
UL1449 3rd Edition, UL1283, CE Compliant and IEC ComplianU