Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UMTS:
LST
1.LST UEXT2GCELL (confirmar externas no RNC)
2.LST UINTRAFREQNCELL
3.LST U2GNCELL
4.LST UCELLCAC
5.LST UINTERFREQNCELL
6.LST UCELL
7.LST ULOCELL
8.LST ADJNODE
9.LST OPTLOG (MOSTRA TODOS OS COMANDOS INSERIDOS NO SITE)
10.LST UPCPICH (CPICH POWER)
11.LST UCAMPSTRATFORMASS(List Parameters Related to Camping Policy Switching in
Case of Heavy Traffic.)
(Use this command to query parameters related to camping policy switching in
case of heavy traffic.)
DSP
RET:
1.DSP RETSUBUNIT - selecione o site e depois insira o cdigo.
2.DSP RETDEVICEDATA - selecione o site e depois insira o cdigo.
3.DSP RET- selecione o site e depois insira o cdigo.
4.DSP RETDEVICEDATA - d-nos o mximo do tilt que a antena possui "Max
Tilt(0.1degree)"
DSP NODEBBBRES-para identificar a capacidade de CE UL no site. dever ser igual ou
superior ao licenciado na board e a capacidade deve ser "Capacity = UMTS Only"
1.DSP BRD
2.DSP TXBRANCH (potncia do hardware em watts) TxBranch Status
3.DSP UCELLCFG (comando no nodeB e mostra-nos o que est configurado na RNC)
4.DSP ULOCELLRES (ver em que sector est as placas) Display Resource of Local Cell
5.DSP BBPTC (capacidade de processamento de trfego na placa) Display Base Band
Process Unit Traffic Capability
6.DSP BRDMFRINFO (Use this command to query the manufacturing information about a
board. Only one board can be queried at a time. Because there is only one backplane
in the BBU subrack, the manufacturing information about the subrack can be obtained
by the query of the manufacturing information about the backplane.
Activao/Verificao do 64QAM
A nvel de NodeB(Selecionamos o Site):
LST ULOCELL--> Query Mode:LOCALCELL Local Cell ID: 0(A),1(B),2(C)...
A nvel de RNC:
LST UCELLALGOSWITCH Parmetros(Cell 64QAM Function Switch:ON & Cell DL L2ENHANCED
Function Switch:ON)
Potncia -
430dB --> 20W
447dB --> 30W
460dB --> 40W
490dB --> 80W
LTE-4G