Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
- Database option:
Method database for up to 15 user-
defined methods
Countdown timer
After pressing start, a countdown timer
shows remaining total cycle time.
CitoPress can reduce mounting times to nearly one third, compared to competing presses.
(Applies for a 30 mm dia. cylinder. When using a 40 mm dia. cylinder CitroPress can reduce
mounting times by half)
2
SPECIFICATIONS Cat. no. TECHNICAL DATA
CitoPress-20 05746127 SUBJECT SPECIFICATION
Advanced, electro-hydraulic hot mounting press with two cylinders,
which can be used individually. Built-in Hot Mounting Application Guide Mounting unit
with automatic conversion of method parameters. Mounting units
Mounting dia. 25, 30, 40, 50 mm, 1", 1"
are ordered separately. Optional dosing unit CitoDoser and Base Unit
No. of mounting units CitoPress-10: 1
(05796101+ 05796102), recirculation Cooling system 7 (05767XXX),
CitoPress-20: 2
Database (05736900) and Sensitive mode (05736901).
CitoPress-10 05736127
Advanced, electro-hydraulic hot mounting press with one cylinder. Mounting press
Built-in Hot Mounting Application Guide with automatic conversion of
Mounting parameters
method parameters. Mounting units are ordered separately.
Pressure 50-350 bar / 725-5076 psi in steps
Optional dosing unit CitoDoser and Base Unit (05796101+05796102),
of 25 bar / 363 psi
recirculation Cooling system 7 (05767XXX), Database (05736900)
Heating time 1-15 min in steps of 0.5 min
and Sensitive mode (05736901).
Heating temperature 80-180C /176-356F in steps
Mounting units of 5C / 9F
Consisting of heating/cooling unit, lower ram and Cooling time 1-15 min in steps of 0.5 min
top closure with upper ram. Cooling rate High: Full flow
Cylinder diameter 1" 05786127 Medium: 20% of full flow
Low: 3% of full flow
Cylinder diameter 1" 05786227
Dosing rate
Cylinder diameter 25 mm 05786327 (with optional CitoDoser) 20-150%
Struers products are subject to constant product development. Therefore, we reserve the
right to introduce changes in our products without notice.
3
Available in two m
CitoPress-20 with
CitoPress-10 with
HandyDoser* - when combining two resins
Combining CitoDoser with HandyDoser, no spoons or
funnels are required any more, and dosing the right
volume becomes really easy. Compact, low-mass
mounting units
significantly reduces
heating time
Remote signalling
The mounting unit tower is equipped with a LED-
bar, which lights up when a process is started,
and flashes when the process is completed.
Extended temperature
range: 80-180C
Easy cleaning
Easy access means quick change of
mounting units and easy cleaning.
Selectable Stand-by
heat with sleep function
Intuitive operation
The large LCD display and the turn/push-knob
facilitate a fast and easy selection of parameters.
4
models:
dual cylinders
a single cylinder
CitoDoser*
The unique automatic dosing system enables dosing of
a pre-set amount of mounting resin meaning faster filling
Hydraulic system of the cylinders and less spilling of resins.
controls the pressure
with very high
accuracy, securing
fragile specimens
*Optional
5
Struers A/S
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Phone +45 44 600 800
Fax +45 44 600 801
struers@struers.dk
www.struers.com
About Struers
Struers is the world leader in materialographic innovation. We develop, manufacture and distribute quality
10.2014 / 62127374. Printed in Denmark
materialographic preparation solutions to help our customers realize maximum productivity and performance in
laboratories and production facilities around the world. Struers is based in Copenhagen, Denmark with affiliates
in 23 countries. Struers employees, including experienced metallographers and qualified service personnel,
work from strategically positioned global offices, supported by a worldwide network of dealers.
Learn more
Contact a Struers sales representative today or visit www.citopress.com