Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Created by:
Phone:
Date: 07/11/2017
Position Qty. Description
1 NK 125-315/336 A2-F-B-E-BAQE
Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with
dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according
to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of
the back pull-out design enabling removal of the coupling, bearing bracket and impeller without
disturbing the motor, pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted
on a common base frame.
Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures
deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the
process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
The pump housing has both a priming and a drain hole closed by plugs.
The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller is
statically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate for
axial thrust.
Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the spring
and around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movement
is not prevented by deposits on the shaft.
Primary seal:
- Rotating seal ring material: Carbon graphite, metal-impregnated
- Stationary seat material: Silicon carbide (SiC)
Date: 07/11/2017
Position Qty. Description
This material pairing has a very good corrosion resistance and is especially suitable for water up to
+120 C. However, seal life will be reduced at temperatures above +90 C. The material pairing is not
recommended for liquids containing particles as this will result in heavy wear on the SiC face.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft is made of stainless steel and has a diameter of 42 mm where the coupling is mounted.
The pump uses a spacer coupling between the pump and motor shaft.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards
and mounting designation B3 (IM 1001). Electrical tolerances comply with IEC 60034.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the motor
is to be connected to a variable speed drive, the pump should be ordered with an electrically insulated
motor bearing.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 C
Liquid temperature during operation: 20 C
Density: 983.2 kg/m
Kinematic viscosity: 0.48 mm2/s
Technical:
Speed for pump data: 1480 rpm
Actual calculated flow: 311 m/h
Resulting head of the pump: 32.3 m
Actual impeller diameter: 336 mm
Impeller nom: 315 mm
Primary shaft seal: BAQE
Secondary shaft seal: NONE
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-GJL-250
ASTM A48-40 B
Impeller: Bronze
DIN W.-Nr. CuSn10
ASTM B584-C83600
Rubber: EPDM
Date: 07/11/2017
Position Qty. Description
Wear ring mat.: High alloy brass(CuZn34Mn3AI2
Installation:
Maximum ambient temperature: 55 C
Maximum operating pressure: 16 bar
Flange standard: EN 1092-2
Pump inlet: DN 150
Pump outlet: DN 125
Pressure rating: PN 16
Coupling type: Spacer
Base frame: EN / ISO
Electrical data:
Motor type: SIEMENS
IE Efficiency class: IE3
Rated power - P2: 37 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 69,0-64,0/39,5-37,0 A
Starting current: 640-640 %
Cos phi - power factor: 0,86
Rated speed: 1480 rpm
Efficiency: IE3 93,9%
Motor efficiency at full load: 93.9-93.9 %
Motor efficiency at 3/4 load: 94.5-94.5 %
Motor efficiency at 1/2 load: 94.4-94.4 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Lubricant type: Grease
Others:
Minimum efficiency index, MEI : 0.63
ErP status: EuP Standalone/Prod.
Net weight: 679 kg
Gross weight: 746 kg
Shipping volume: 1.91 m
Date: 07/11/2017
98319001 NK 125-315/336 50 Hz
H NK 125-315/336, 50Hz eta
[m] [%]
Q = 311 m/h
H = 32.3 m
Pumped liquid = Water
Liquid temperature during operation = 20 C
Density = 983.2 kg/m
45
40
35
30
25 100
20 80
15 60
10 40
5 20
35 P2 7
30 6
25 5
20 4
15 3
10 2
5 P1 = 35.49 kW 1
P2 = 33.4 kW
NPSH = 2.7 m
0 0
Date: 07/11/2017
H NK 125-315/336, 50Hz eta
Description Value [m] [%]
Q = 311 m/h
General information: 45 H = 32.3 m
Product name: NK 125-315/336 Pumped liquid = Water
A2-F-B-E-BAQE 40 Liquid temperature during operation = 20 C
Density = 983.2 kg/m
Product No: 98319001 35
25 100
Technical: 20 80
Speed for pump data: 1480 rpm
15 60
Actual calculated flow: 311 m/h
10 40
Resulting head of the pump: 32.3 m
5 Eta pump = 80.5 % 20
Actual impeller diameter: 336 mm
Eta total = 75.8 %
Impeller nom: 315 mm 0 0
0 50 100 150 200 250 300 Q [m/h]
Primary shaft seal: BAQE P NPSH
Secondary shaft seal: NONE [kW] P1 [m]
Shaft diameter: 42 mm 30
P2
6
Curve tolerance: ISO9906:2012 3B
20 4
Pump version: A2 P1 = 35.49 kW
10 P2 = 33.4 kW 2
NPSH = 2.7 m
Materials: 0 0
Pump housing: Cast iron
EN-GJL-250
ASTM A48-40 B
1589
Impeller: Bronze 140 125
8 x 19
355
Material code: B
150
718
Rubber: EPDM
380
Code for rubber: E
100
Wear ring mat.: High alloy 110
= = 600
28
300
1200
670
730
1800
brass(CuZn34Mn3AI2
=
600
28
110
8 x 23
8 x 19 1589
140
125
Installation:
Maximum ambient temperature: 55 C
Maximum operating pressure: 16 bar
Flange standard: EN 1092-2
Connect code: F
+T +T +T
Liquid:
Pumped liquid: Water TO AMPLIFIER
RELAY
Electrical data:
Motor type: SIEMENS
IE Efficiency class: IE3
Rated power - P2: 37 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 69,0-64,0/39,5-37,0 A
Starting current: 640-640 %
Cos phi - power factor: 0,86
Date: 07/11/2017
Description Value
Rated speed: 1480 rpm
Efficiency: IE3 93,9%
Motor efficiency at full load: 93.9-93.9 %
Motor efficiency at 3/4 load: 94.5-94.5 %
Motor efficiency at 1/2 load: 94.4-94.4 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor protec: PTC
Motor No: 98957810
Lubricant type: Grease
Others:
Minimum efficiency index, MEI : 0.63
ErP status: EuP Standalone/Prod.
Net weight: 679 kg
Gross weight: 746 kg
Shipping volume: 1.91 m
Date: 07/11/2017
98319001 NK 125-315/336 50 Hz
355 380
100
8 x 19
125
600
670
730
8 x 23
28
718
300
=
1800
1200
1589
=
300
110
140
150
Date: 07/11/2017
98319001 NK 125-315/336 50 Hz
+T +T +T
+T +T +T
TO AMPLIFIER
RELAY
L1 L2 L3
Date: 07/11/2017
750,000
700,000
NK 125-315/336
650,000 597671 EUR
100 %
600,000
550,000
500,000
450,000
400,000
350,000
300,000 97%
250,000
200,000
150,000
Payback Time
700,000 Life Cycle Costs [EUR]
650,000
NK 125-315/336
600,000
550,000
500,000
450,000
400,000
350,000
300,000
250,000
200,000
150,000
100,000
50,000
years of operation
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Date: 07/11/2017
Life Cycle Cost Report
Requirements: General inputs:
Flow: 311 m/h Energy price (high tariff): 0.15 EUR/kWh n - Life in years: 15
Capacity per year: ---- i - Interest rate: 0 %
Head: ---- p - Inflation rate: 6 %
Inputs: A:
System: NK 125-315/336
per year total (life)
Initial investment cost [EUR]
Pump system [EUR]
Further investment [EUR]
[EUR/Year]
Routine maintenance cost [EUR/Year]
Repair cost [EUR/Year]
Other yearly costs [EUR/Year]
Output:
Net present LCC-value [EUR] 597671