Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
REVOLVE &
PATTERN
Objectives of LESSON 4:
Revolved feature
1. 3D model that has to be developed in this lesson is shown below.
4. Click Revolve boss/bas tool on features toolbar. In revolve parameters, select the
construction line as the revolve axis. Angle = 360 deg. Solidwork will
automatically preview the result of revolve. Click OK. A completed revolved
feature will be built and the feature will appear in feature manager design tree.
Save as REVOLVE.
2. Sketch a big circle (16mm dia) on the surface of the revolved part. Then, create
a small circle (2mm-dia) at any position on the big circle line.
3. Click Circular sketch pattern on Sketch toolbar. The circular pattern parameter
box will appear and select the small circle as the entities to pattern; number of
pattern is 8 with 360 deg.
Exercise 3:
Based on orthographic view shown below, construct a 3D model.
ANSWER