9125/7
26 September 1997
SUPERSEDING
MIL-1-55164/7G
24 February 1987
COMMERCIAL ITEM DESCRIPTION SHEET
TERMINAL LUGS, SOLDER TYPE, STYLES TBLD AND TBLS
‘The General Services Administration has authorized the use of this commercial item description
(CID) as a replacement for Styles TBLD and TBLS of MIL-T-55164/7 for all federal agencies.
‘The requirements for acquiring the product described herein shall consist of this sheet and CID
A-A-59125,
REQUIREMENTS:
Dimensions and configuration: see Figure 1.
STVLE TEL:
TERMINAL BOARD TYPE 37,38 AND 39
AMSC N/A
PSC 5940
DISTRIBUTION STATEMENT A. Approved for public release;
istribution is unlimited,4
zl im )
ame Tato
ie
>
A-A-5S9125/7
TERUINAL BOARD TVPE 43
iF
stae wis
TLE TELE STHLETELS
Xu L BOARD TYPE 44
Figure |. Terminal Board.
Table I, Dimensions.
Dimensions TBL-37 TBL-38 TBL-39 ‘TBL-43 TBL-44
‘A Style TBLD) 1219 1590 1.859 1.062 1031
‘A (Style TBLS), 92 1188 1.406 812 119.
B -280/,300 325, 4 180, 180
G 453 578 680 406 316
H 312 421 500 250
NOTES:
1. Dimensions are in inches.
2. Tolerances are as follows:
Dimension “A” and “G" + 0.016
Dimension “B” and “H” (except for types 43 and 44) + 0.005
Dimension “B” for types 43 and 44 + 0.006A-A-S9125/7
3. The drawing depicts only general design characteristics and is not intended to limit specific
manufacturing processes
4, Dimensions “B”, “G”,
and “H” apply to both TBLD and TBLS lugs
Table II. Current Ratings.
MILITARY INTERESTS, CIVIL AGENCY COORDINATING ACTIVITY:
Custodian: GSA-7FXE,
Army - CR
Navy - AS Preparing activity:
Air Fore - 85 Amy - CR
Reviewer: (Project No, 5940-1192-07)
DLA - GS