Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ARCHITECTURAL COATINGS
TOUCHWOOD
www.asianpaints.com/oman NC Colour
PRODUCT DESCRIPTION
BERGER Touchwood NC Colour is a high quality nitro-cellouse based quick drying pigmented coating, recommended for
interior wood finishes.
It provides a new glossy/ silkmatt / matt finish colour to wood.
TECHNICAL DATA
Finish : Gloss / Satin / Matt
Composition Nominal : One component NC based.
Specific gravity : 1.1 0.02
% Volume Solids : 32 2 %
Gloss level at 60 head : Gloss: more than 70 / Satin: 30 5 / Matt: 10 - 15
Viscosity of supply : Gloss : 105-115 KU @ Stormor Viscometer
APPLICATION DATA
SURFACE PREPARATION
Proper surface preparation is important to get a good finish.
Sand the wooden surface and clean free of any dirt or grease.
Use Touchwood wood Filler to fill the grains of the wood.
Sand and remove excess wood filler and apply NC primer Surfacer.
Do not use any filler if open grain is required.
Note : Sanding should be done along the grains only.
APPLICATIONS DETAILS
On the prepared surface apply one coat of NC Colour, which has been thoroughly mixed with NC thinner in the
recommended thinning ratio.
Allow the surface to dry for 2-4 hrs. Sand mildly with Emery paper 400, clean and apply 2-3 coats to give the desired finish.
For extra high gloss rub and polish the surface with conventional rubbing compounds recommended for NC finishes
* For detailed system recommendation based on specific requirements please contact Berger representative.
DISCLAIMER
The information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve.
In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this
product, unless specifcally agreed to in writing by us. The information provided in the datasheet may be modifed by us without notice.
This Technical Data Sheet supersedes those previously issued with immediate effect.
Version: 02/2007