Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TEST AND INSPECTION PER: 01-SAMSS-043 & P.O Specifications as Noted Below
0020 X Welding Procedure Specification / Procedure Qualification Per para 6 of 01-SAMSS-043 and ASME Sec IX.
Records (including repair WPS / PQR)
0040 X X Raw Material Verification Per Applicable ASTM standards. 01-SAMSS-043 Para 16.3 and
10.2.3
0020
0010
*** X X
In process inspection & test requirement
Heat Treatment
Specification Details / Notes:
Per para 7 of 01-SAMSS-043
0030 X X Chemical Composition, Heat and Product analysis Per para 8 of 01-SAMSS-043 and applicable ASTM std.
0040 X X Mechanical Tests; Tensile, Impact test, Flattening, Hardness, Per para 9 of 01-SAMSS-043 and applicable ASTM std.
Guided Bends test.
0050 X X HIC Testing Per 01-SAMSS-043 Annex B (pipes ordered for sour service)
and IR010210
0070 X Repair welding Per para 6 of 01-SAMSS-043 (Weld repairs on seamless pipes
and autogenously welded pipes are not permitted.)
0090 X X NDT Examinations: UT, EMI and RT Per para 11 of 01-SAMSS-043 and applicable ASTM.
0030 *** Final inspection & test requirements Specification Details / Notes:
IR010710 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/08/2011 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 04/13/2011 IR010710 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010 X X Visual and Dimensional including Workmanship, Diameter, Wall Per para 12 of 01-SAMSS-043 and Applicable ASTM Std.
Thickness, Out of roundness, straightness, weld inspection,
Weight, and Lengths
0020 X Coatings Pipes shall be supplied w/o mill coating unless otherwise
specified in P.O.
0030 X X Marking, Handling, Packing and shipment Per para 14 and 15 of 01-SAMSS-043
0040 X X Product Material Test Certificate and Quality Data Dossier Per para 16 of 01-SAMSS-043
Notes
(1) May only be waived by the responsible Saudi Aramco, ASC, and AOC Inspection Offices.
(2) See form SA175 - 000003 for instructions on using this form.
(3) Extent of witnessing should be decided during the pre-inspection meeting.
End of IR010710