Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
01000
02000
02000
Toggle locators
02000 Locating feet
Support blocks
03000
Spacing elements
04000
05000
06000
07000
08000
09000
20000
21000
22000
23000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
93
Distributed in Romania
by Best TOOLS SRL
02000 info@btools.ro / 0368.412.413
Toggle locators
D3 D3 D4
9
L1 0,02
L1 0,1
L1 0,2
Material:
Body in tempered steel.
Ball in ball-bearing steel 1.2067.
L2
L2
L2
Form M: ball in tempered steel, insert with serration
in hard metal.
D2 D2 D2
Surface nish:
Body heat-treated and phosphated. Ball hardened. SW SW SW
Form M ball heat-treated.
D1 D1 D1
Sample order:
nlm 02000-120
Note:
The toggle locators serve as stops, supports and
thrust pads in xture constructions.
The serrated hard metal tips are soldered in.
9
L 0,02
L1
L1
L 0,1
D2 D2
D1 n6 D1 n6
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
94
Distributed in Romania
by Best TOOLS SRL
02000 info@btools.ro / 0368.412.413
01000
Toggle locators
02000
03000
04000
05000
Order No. Form D1 D2 D3 L1 L2 Ball- SW Load capacity max. kN Approx.
(static load only) weight
kg
02000-108 C 13 M8 7,2 13 8 10 11 10 0,013
02000-110 C 20 M10 10,5 18 10 16 17 25 0,040
06000
02000-112 C 20 M12 10,5 18 12 16 17 25 0,040
02000-116 C 30 M16 20 27 16 25 27 90 0,100
02000-120 C 50 M20 34,5 35 20 40 41 165 0,520
07000
Order No. Form D1 D2 D3 L1 L2 Ball- SW Load capacity Approx.
max. kN weight
(static load only) kg
02000-308 F 13 M8 7,2 13 8 10 11 10 0,013
02000-310 F 20 M10 10,5 18 10 16 17 25 0,040
08000
02000-312 F 20 M12 10,5 18 12 16 17 25 0,040
02000-316 F 30 M16 20 27 16 25 27 90 0,100
02000-320 F 50 M20 34,5 35 20 40 41 165 0,520
09000
Order No. Form D1 D2 D4 L1 L2 SW Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02000-908 M 13 M8 7,7 13,3 8 11 10 10 0,013
02000-910 M 20 M10 12 18 10 17 16 25 0,040
20000
02000-912 M 20 M12 12 18 12 17 16 25 0,040
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
95
Distributed in Romania
by Best TOOLS SRL
02001 info@btools.ro / 0368.412.413
Toggle locators
with swivel angle 20
Form C Form M
plain, attened ball attened ball,
serration in hard metal
O-ring
O-ring
Material:
Body in steel. Ball in rust and acid resistant steel.
Form M with hard metal insert.
Surface nish:
Body black oxide nish. Ball natural nish
Sample order:
nlm 02001-108
Note:
Toggle locators are used to support and clamp unmachined
and machined workpieces. In addition, they serve as stops,
supports and thrust pads in xture and tool shops.
Patent applied for.
Grub screws or threaded studs can be screwed and glued into
thread D3. This is an easy way of obtaining a toggle locator
with external thread.
L3 0,25
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
96
Distributed in Romania
by Best TOOLS SRL
info@btools.ro / 0368.412.413
01000
Notes
02000
03000
04000
05000
06000
07000
08000
09000
20000
21000
22000
23000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
97
Distributed in Romania
by Best TOOLS SRL
02002 info@btools.ro / 0368.412.413
Toggle locators
with O-ring
Form C Form F
plain, attened steel ball serrated, attened steel ball
Form K
plain, attened POM ball
O-ring O-ring
Material:
Body tempered steel.
Ball:
Form C, F tool steel.
Form K POM.
Form O stainless steel with diamond surface.
Form P stainless steel with polyurethane surface.
Surface nish:
Body heat-treated and black oxide nish.
Ball:
Form C, F hardened, black oxide nish.
Form K POM ball in white.
Form O surface comparable with abrasive grit size 100.
Form P polyurethane, Shore hardness 60.
Sample order:
Form O Form P
nlm 02002-704X012
stainless steel ball with stainless steel ball with
Note: diamond surface polyurethane surface
The toggle locators are used to support and clamp unmachined
and machined workpieces.
In addition, they serve as stops, supports and pressure pieces in D2 D2
jig- and toolmaking. O-ring W O-ring W
L3
L3
0,13
0,13
L
It is ideally suited to supporting smooth or slippery applications
L
L1
L1
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
98
Distributed in Romania
by Best TOOLS SRL
02002 info@btools.ro / 0368.412.413
01000
Toggle locators
with O-ring
02000
03000
Order No. Form D1 D2 D3 L L1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
04000
02002-104X012 C 10 6 M4 12 4,5 7 12 0,006
02002-104X025 C 10 6 M4 25 12 7 12 0,013
02002-105X016 C 13 8,5 M5 16 5 10 20 0,015
02002-105X025 C 13 8,5 M5 25 12 10 20 0,023
05000
Order No. Form D1 D2 D3 L L1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02002-304X012 F 10 6 M4 12 4,5 7 12 0,006
06000
02002-304X025 F 10 6 M4 25 12 7 12 0,013
02002-305X016 F 13 8,5 M5 16 5 10 20 0,014
02002-305X025 F 13 8,5 M5 25 12 10 20 0,022
07000
Order No. Form D1 D2 D3 L L1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02002-704X012 K 10 6 M4 12 4,5 7 2 0,005
02002-704X025 K 10 6 M4 25 12 7 2 0,012
08000
02002-705X016 K 13 8,5 M5 16 5 10 4 0,011
02002-705X025 K 13 8,5 M5 25 12 10 4 0,019
09000
max. kN weight
(static load only) kg
02002-504X012 O 10 8 M4 12,5 3,5 2 28 7 11,5 0,006
02002-504X025 O 10 8 M4 25,5 9 2 28 7 11,5 0,013
02002-505X017 O 13 11 M5 17,5 6,5 3 28 10 19,8 0,015
20000
02002-505X026 O 13 11 M5 26,5 9 3 28 10 19,8 0,023
02002-506X021 O 17 14 M6 21 7,5 3 28 13 27,4 0,031
02002-508X024 O 19 19 M8 24 8,5 4 24 15 38,6 0,045
02002-510X028 O 24 21 M10 28 9 4 24 20 58,3 0,084
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
99
Distributed in Romania
by Best TOOLS SRL
02003 info@btools.ro / 0368.412.413
Toggle locators
with O-ring and exchangeable inserts
Form C
plain, attened steel insert
Form E Form F Form M
Stainless steel insert plain, serrated, gripper attened,
attened attened gripper serration in hard metal
Form K
plain, attened POM insert
10
10
10
nish.
4
Insert:
L3
L3
L3
L1 0,13
L1 0,13
L1 0,13
Form C in tool steel, hardened and black oxide nish.
Form F in tool steel, hardened and black oxide nish.
L2
L2
L2
Form M in tool steel with carbide serration, black oxide nish.
Form K in white POM D4 D4 D4
Form E stainless steel, hardened, natural nish. D1 D1 D1
Form O stainless steel with diamond surface comparable
with abrasive grit size 100.
Form P stainless steel with polyurethane surface, Shore
hardness 60.
Sample order:
nlm 02003-736X036
Note: Form O Form P
Toggle locators are used to support and clamp unmachined stainless steel insert with stainless steel insert with
and machined workpieces. diamond surface polyurethane surface
In addition, they serve as stops, supports and thrust pads in
xture and tool shops.
D2 O-ring D3
10
10
The ball can be removed from the housing by applying light O-ring
pressure to the socket head screw. D2
6
4
L3
L3
L1 0,13
0,13
L2
L2
Advantages:
Highly cost-effective as inserts can be exchanged.
D4 D4
The built-in O-ring keeps the ball in its place and prevents
D1 D1
dirt and foreign particles from entering.
This assures smooth and steady movements.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
100
Distributed in Romania
by Best TOOLS SRL
02003 info@btools.ro / 0368.412.413
01000
Toggle locators
with O-ring and exchangeable inserts
02000
03000
Order No. Form D1 D2 D4 L1 L2 L3 Ball- Load capacity Approx. Order No.
max. kN weight gripper
(static load only) kg
02003-217X022 E 17 10 M6 22 7 10 13 28 0,031 07113-10102
04000
02003-219X024 E 19 12 M8 24 8 10 15 39 0,043 07113-12102
02003-224X028 E 24 16 M10 28 8 10 20 58 0,081 07113-16102
02003-230X030 E 30 20 M12 30 9 10 23 95 0,139 07113-20102
02003-236X036 E 36 25 M12 36 11 10 28 136 0,251 07113-25102
05000
Order No. Form D1 D2 D4 L1 L2 L3 Ball- Load capacity Approx. Order No.
max. kN weight POM insert
(static load only) kg
02003-317X022 F 17 10 M6 22 7 10 13 28 0,031 07113-1010
02003-319X024 F 19 12 M8 24 8 10 15 39 0,045 07113-1210
02003-324X028 F 24 16 M10 28 8 10 20 58 0,082 07113-1610
06000
02003-330X030 F 30 20 M12 30 9 10 23 95 0,141 07113-2010
02003-336X036 F 36 25 M12 36 11 10 28 136 0,249 07113-2510
07000
02003-717X022 K 17 10 M6 22 7 10 13 4 0,027 07113-10109
02003-719X024 K 19 12 M8 24 8 10 15 7 0,036 07113-12109
02003-724X028 K 24 16 M10 28 8 10 20 14 0,069 07113-16109
02003-730X030 K 30 20 M12 30 9 10 23 27 0,121 07113-20109
08000
02003-736X036 K 36 25 M12 36 11 10 28 47 0,221 07113-25109
09000
02003-919X024 M 19 12 9,5 M8 24 8 10 15 39 0,045 07113-12107
02003-924X028 M 24 16 12,7 M10 28 8 10 20 58 0,082 07113-16107
02003-930X030 M 30 20 15,9 M12 30 9 10 23 95 0,141 07113-20107
02003-936X036 M 36 25 19 M12 36 11 10 28 136 0,249 07113-25107
20000
Order No. Form D1 D2 D4 L1 L2 L3 Ball- Load capacity Approx. Order No. for
max. kN weight stainless steel insert,
(static load only) kg diamond surface
02003-517X022 O 17 10 M6 22 7 10 13 28 0,031 07113-10105
02003-519X024 O 19 12 M8 24 8 10 15 39 0,043 07113-12105
02003-524X028 O 24 16 M10 28 8 10 20 58 0,081 07113-16105
21000
kg polyurethane surface
02003-617X024 P 17 10 10 M6 24 7 12 13 0,031 07113-10126
02003-619X026 P 19 12 13 M8 26 8 12 15 0,043 07113-12126
02003-624X030 P 24 16 16 M10 30 8 12 20 0,081 07113-16126
02003-630X032 P 30 20 21 M12 32 9 12 23 0,139 07113-20126
23000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
101
Distributed in Romania
by Best TOOLS SRL
02004 info@btools.ro / 0368.412.413
Toggle locators
swivels back automatically
Form C Form F
at support surface serrated support surface
Material:
L1 0,05
Tempered steel.
L1 0,1
Surface nish:
Hardened and black oxide nish.
Sample order:
nlm 02004-105
A
Note: D4 h9
Toggle locators are used to support and clamp unmachined
and machined workpieces. view "A"
In addition, they serve as stops, supports and thrust pads
in xture and tool shops.
Advantages:
The built-in O-ring prevents dirt and foreign particles
from entering.
The clamping surface swivels back to zero-point position
automatically after clamping.
High load rating and small size.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
102
Distributed in Romania
by Best TOOLS SRL
02005 info@btools.ro / 0368.412.413
01000
Adjustable toggle locators
02000
Form C
plain, attened ball
03000
Material:
Steel.
04000
Surface nish:
Housing heat-treated and manganese phosphate treated.
Ball hardened, natural nish.
Nut with black oxide nish. Form F
serrated, attened ball
Sample order:
05000
nlm 02005-316
Note:
Ball is protected against torsion.
06000
07000
08000
09000
Order No. Form D1 D2 L L1 E SW Ball- Load capacity Approx.
max. kN weight
20000
(static load only) kg
02005-108 C M8 5,8 36,6 25 14,5 13 8,5 8 0,025
02005-110 C M10 8,6 45,7 30 19 17 12 8 0,055
02005-112 C M12 8,6 50,7 35 19 17 12 15 0,055
02005-116 C M16 10,5 60,7 40 27 24 16 25 0,115
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
103
Distributed in Romania
by Best TOOLS SRL
02006 info@btools.ro / 0368.412.413
Form C Form F
plain, attened steel ball serrated, attened steel ball
Form K
plain, attened POM ball
O-ring O-ring
Material:
Body in tempered steel.
Ball:
Form C, F, tool steel.
Form K POM.
Form O stainless steel with diamond surface.
Form P stainless steel with polyurethane surface.
Surface nish:
Body tempered, black oxide nish.
Ball:
Form C, F hardened, black oxide nish.
Form K POM ball white.
Form O surface comparable with abrasive grit size 100.
Form P polyurethane, Shore hardness 60.
Sample order:
nlm 02006-106X040 SW
Note:
The toggle locators are used to support and clamp
unmachined and machined workpieces.
In addition, they serve as stops, supports and pressure pieces
in jig- and toolmaking. Form O Form P
stainless steel ball with stainless steel ball with
Ball secured against torsion. diamond surface polyurethane surface
SW
E E
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
104
Distributed in Romania
by Best TOOLS SRL
02006 info@btools.ro / 0368.412.413
01000
Adjustable toggle locators
with O-ring
02000
03000
Order No. Form D1 D2 L1 L2 E SW Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02006-106X012 C M6 6 12 9,5 11,5 10 7 9 0,007
02006-106X025 C M6 6 25 9,5 11,5 10 7 9 0,010
04000
02006-106X040 C M6 6 40 9,5 11,5 10 7 9 0,012
02006-108X012 C M8 8,5 12 13 15 13 10 15 0,016
02006-108X025 C M8 8,5 25 13 15 13 10 15 0,021
02006-108X040 C M8 8,5 40 13 15 13 10 15 0,026
05000
Order No. Form D1 D2 L1 L2 E SW Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02006-306X012 F M6 6 12 9,5 11,5 10 7 9 0,007
06000
02006-306X025 F M6 6 25 9,5 11,5 10 7 9 0,010
02006-306X040 F M6 6 40 9,5 11,5 10 7 9 0,012
02006-308X012 F M8 8,5 12 13 15 13 10 15 0,016
02006-308X025 F M8 8,5 25 13 15 13 10 15 0,021
02006-308X040 F M8 8,5 40 13 15 13 10 15 0,025
07000
Order No. Form D1 D2 L1 L2 E SW Ball- Load capacity Approx.
max. kN weight
(static load only) kg
08000
02006-706X012 K M6 6 12 9,5 11,5 10 7 2 0,006
02006-706X025 K M6 6 25 9,5 11,5 10 7 2 0,009
02006-706X040 K M6 6 40 9,5 11,5 10 7 2 0,011
02006-708X012 K M8 8,5 12 13 15 13 10 4 0,012
02006-708X025 K M8 8,5 25 13 15 13 10 4 0,017
09000
02006-708X040 K M8 8,5 40 13 15 13 10 4 0,022
20000
(static load only) kg
02006-506X O M6 8 12/25/40 10 2 11,5 10 - 28 1 9,2 0,008
02006-508X O M8 11 12/25/40 14,5 3 15 13 - 28 10 15,5 0,018
02006-510X O M10 14 15/30/50 16 3 19,6 17 3 28 13 18,8 0,032
02006-512X O M12 19 20/40/60 19 4 21,9 19 5 24 15 29,8 0,051
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
105
Distributed in Romania
by Best TOOLS SRL
02007 info@btools.ro / 0368.412.413
10
10
10
Ball in rust and acid-resistant steel, hardened and natural
nish.
4
Insert:
L3
L3
L3
L2
L2
L2
Form C in tool steel, hardened and black oxide nish.
Form F in tool steel, hardened and black oxide nish.
Form M in tool steel with carbide serration, black oxide
nish.
Form K in white POM.
Form E stainless steel, hardened, natural nish.
L1
L1
L1
Form O stainless steel with diamond surface comparable
with abrasive grit size 100.
Form P stainless steel with polyurethane surface, Shore
hardness 60.
SW1 SW1 SW1
Sample order: D1
nlm 02007-124X100
Note:
SW
10
- The built-in O-ring keeps the ball in its place and prevents D2
6
4
L3
L2
L2
L1
SW1 SW1
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
106
Distributed in Romania
by Best TOOLS SRL
02007 info@btools.ro / 0368.412.413
01000
Adjustable toggle locators
with O-ring and exchangeable inserts
02000
Order No. Form D1 D2 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No.
max. kN weight steel insert
(static load only) kg
02007-110X015 C M10 10 15 17 10 19,6 17 3 13 19 0,032 07113-10108
03000
02007-110X030 C M10 10 30 17 10 19,6 17 3 13 19 0,039 07113-10108
02007-110X050 C M10 10 50 17 10 19,6 17 3 13 19 0,047 07113-10108
02007-112X020 C M12 12 20 19 10 21,9 19 5 15 30 0,048 07113-12108
02007-112X040 C M12 12 40 19 10 21,9 19 5 15 30 0,059 07113-12108
04000
02007-112X060 C M12 12 60 19 10 21,9 19 5 15 30 0,071 07113-12108
02007-116X025 C M16 16 25 23 10 27,7 24 6 20 50 0,100 07113-16108
02007-116X050 C M16 16 50 23 10 27,7 24 6 20 50 0,127 07113-16108
02007-116X080 C M16 16 80 23 10 27,7 24 6 20 50 0,159 07113-16108
02007-120X030 C M20 20 30 24 10 34,6 30 8 23 85 0,171 07113-20108
05000
02007-120X060 C M20 20 60 24 10 34,6 30 8 23 85 0,220 07113-20108
02007-120X100 C M20 20 100 24 10 34,6 30 8 23 85 0,289 07113-20108
02007-124X040 C M24 25 40 30 10 41,6 36 10 28 121 0,321 07113-25108
02007-124X100 C M24 25 100 30 10 41,6 36 10 28 121 0,468 07113-25108
06000
Order No. Form D1 D2 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No.
max. kN weight for
(static load only) kg stainless steel insert
02007-210X015 E M10 10 15 17 10 19,6 17 3 13 19 0,032 07113-10102
02007-210X030 E M10 10 30 17 10 19,6 17 3 13 19 0,039 07113-10102
02007-210X050 E M10 10 50 17 10 19,6 17 3 13 19 0,047 07113-10102
07000
02007-212X020 E M12 12 20 19 10 21,9 19 5 15 30 0,048 07113-12102
02007-212X040 E M12 12 40 19 10 21,9 19 5 15 30 0,059 07113-12102
02007-212X060 E M12 12 60 19 10 21,9 19 5 15 30 0,071 07113-12102
02007-216X025 E M16 16 25 23 10 27,7 24 6 20 50 0,100 07113-16102
08000
02007-216X050 E M16 16 50 23 10 27,7 24 6 20 50 0,127 07113-16102
02007-216X080 E M16 16 80 23 10 27,7 24 6 20 50 0,159 07113-16102
02007-220X030 E M20 20 30 24 10 34,6 30 8 23 85 0,171 07113-20102
02007-220X060 E M20 20 60 24 10 34,6 30 8 23 85 0,220 07113-20102
02007-220X100 E M20 20 100 24 10 34,6 30 8 23 85 0,289 07113-20102
09000
02007-224X040 E M24 25 40 30 10 41,6 36 10 28 121 0,321 07113-25102
02007-224X100 E M24 25 100 30 10 41,6 36 10 28 121 0,468 07113-25102
Order No. Form D1 D2 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No.
max. kN weight gripper
20000
(static load only) kg
02007-310X015 F M10 10 15 17 10 19,6 17 3 13 19 0,031 07113-1010
02007-310X030 F M10 10 30 17 10 19,6 17 3 13 19 0,038 07113-1010
02007-310X050 F M10 10 50 17 10 19,6 17 3 13 19 0,047 07113-1010
02007-312X020 F M12 12 20 19 10 21,9 19 5 15 30 0,050 07113-1210
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
107
Distributed in Romania
by Best TOOLS SRL
02007 info@btools.ro / 0368.412.413
Order No. Form D1 D2 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No.
max. kN weight POM insert
(static load only) kg
02007-710X015 K M10 10 15 17 10 19,6 17 3 13 4 0,027 07113-10109
02007-710X030 K M10 10 30 17 10 19,6 17 3 13 4 0,034 07113-10109
02007-710X050 K M10 10 50 17 10 19,6 17 3 13 4 0,043 07113-10109
02007-712X020 K M12 12 20 19 10 21,9 19 5 15 7 0,041 07113-12109
02007-712X040 K M12 12 40 19 10 21,9 19 5 15 7 0,052 07113-12109
02007-712X060 K M12 12 60 19 10 21,9 19 5 15 7 0,064 07113-12109
02007-716X025 K M16 16 25 23 10 27,7 24 6 20 14 0,088 07113-16109
02007-716X050 K M16 16 50 23 10 27,7 24 6 20 14 0,115 07113-16109
02007-716X080 K M16 16 80 23 10 27,7 24 6 20 14 0,147 07113-16109
02007-720X030 K M20 20 30 24 10 34,6 30 8 23 27 0,152 07113-20109
02007-720X060 K M20 20 60 24 10 34,6 30 8 23 27 0,202 07113-20109
02007-720X100 K M20 20 100 24 10 34,6 30 8 23 27 0,270 07113-20109
02007-724X040 K M24 25 40 30 10 41,6 36 10 28 47 0,291 07113-25109
02007-724X100 K M24 25 100 30 10 41,6 36 10 28 47 0,438 07113-25109
Order No. Form D1 D2 D3 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No.
max. kN weight gripper
(static load only) kg
02007-910X015 M M10 10 7,9 15 17 10 19,6 17 3 13 19 0,031 07113-10107
02007-910X030 M M10 10 7,9 30 17 10 19,6 17 3 13 19 0,038 07113-10107
02007-910X050 M M10 10 7,9 50 17 10 19,6 17 3 13 19 0,047 07113-10107
02007-912X020 M M12 12 9,5 20 19 10 21,9 19 5 15 30 0,050 07113-12107
02007-912X040 M M12 12 9,5 40 19 10 21,9 19 5 15 30 0,061 07113-12107
02007-912X060 M M12 12 9,5 60 19 10 21,9 19 5 15 30 0,073 07113-12107
02007-916X025 M M16 16 12,7 25 23 10 27,7 24 6 20 50 0,100 07113-16107
02007-916X050 M M16 16 12,7 50 23 10 27,7 24 6 20 50 0,127 07113-16107
02007-916X080 M M16 16 12,7 80 23 10 27,7 24 6 20 50 0,159 07113-16107
02007-920X030 M M20 20 15,9 30 24 10 34,6 30 8 23 85 0,173 07113-20107
02007-920X060 M M20 20 15,9 60 24 10 34,6 30 8 23 85 0,222 07113-20107
02007-920X100 M M20 20 15,9 100 24 10 34,6 30 8 23 85 0,290 07113-20107
02007-924X040 M M24 25 19 40 30 10 41,6 36 10 28 121 0,319 07113-25107
02007-924X100 M M24 25 19 100 30 10 41,6 36 10 28 121 0,466 07113-25107
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
108
Distributed in Romania
by Best TOOLS SRL
02007 info@btools.ro / 0368.412.413
01000
Adjustable toggle locators
with O-ring and exchangeable inserts
02000
03000
04000
05000
Order No. Form D1 D2 L1 L2 L3 E SW SW1 Ball- Load capacity Approx. Order No. for
max. kN weight stainless steel insert,
06000
(static load only) kg diamond surface
02007-510X015 O M10 10 15 17 10 19,6 17 3 13 19 0,032 07113-10105
02007-510X030 O M10 10 30 17 10 19,6 17 3 13 19 0,039 07113-10105
02007-510X050 O M10 10 50 17 10 19,6 17 3 13 19 0,047 07113-10105
02007-512X020 O M12 12 20 19 10 21,9 19 5 15 30 0,048 07113-12105
07000
02007-512X040 O M12 12 40 19 10 21,9 19 5 15 30 0,059 07113-12105
02007-512X060 O M12 12 60 19 10 21,9 19 5 15 30 0,071 07113-12105
02007-516X025 O M16 16 25 23 10 27,7 24 6 20 50 0,100 07113-16105
02007-516X050 O M16 16 50 23 10 27,7 24 6 20 50 0,127 07113-16105
08000
02007-516X080 O M16 16 80 23 10 27,7 24 6 20 50 0,159 07113-16105
02007-520X030 O M20 20 30 24 10 34,6 30 8 23 85 0,171 07113-20105
02007-520X060 O M20 20 60 24 10 34,6 30 8 23 85 0,220 07113-20105
02007-520X100 O M20 20 100 24 10 34,6 30 8 23 85 0,289 07113-20105
02007-524X040 O M24 25 40 30 10 41,6 36 10 28 121 0,321 07113-25105
09000
02007-524X100 O M24 25 100 30 10 41,6 36 10 28 121 0,468 07113-25105
20000
kg polyurethane surface
02007-620X030 P M20 20 21 30 26 12 34,6 30 8 23 0,171 07113-20126
02007-612X020 P M12 12 13 20 21 12 21,9 19 5 15 0,049 07113-12126
02007-610X015 P M10 10 10 15 19 12 19,6 17 3 13 0,032 07113-10126
02007-624X100 P M24 25 27 100 32 12 41,6 36 10 28 0,468 07113-25126
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
109
Distributed in Romania
by Best TOOLS SRL
02008 info@btools.ro / 0368.412.413
Form C Form F
plain, attened steel ball serrated, attened steel ball
Form K
plain, attened POM ball
O-ring O-ring
Material: D2 D2
10
10
1,5
1,5
Body in tempered steel.
Ball:
Form C, F, tool steel.
Form K POM.
Form O stainless steel with diamond surface.
Form P stainless steel with polyurethane surface.
L
L
Surface nish:
Body tempered, black oxide nish.
Ball:
Form C, F hardened, black oxide nish.
Form K POM ball white. D1 SW1 D1 SW1
Form O surface comparable with abrasive grit size 100.
Form P polyurethane, Shore hardness 60.
Sample order:
nlm 02008-112X050
(Please also indicate dimension L.)
Note: Form O Form P
The toggle locators are used to support and clamp stainless steel ball with stainless steel ball with
unmachined and machined workpieces. diamond surface polyurethane surface
In addition, they serve as stops, supports and pressure
pieces in jig- and toolmaking. D2 D2
28 O-ring O-ring
Ball secured against torsion. 28
L3
L3
the surface.
The diamond surface offers excellent wear resistance.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
110
Distributed in Romania
by Best TOOLS SRL
02008 info@btools.ro / 0368.412.413
01000
Order No. Form D1 D2 L SW1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02008-112X025 C M12 6 25 6 7 15 0,015
02008-112X035 C M12 6 35 6 7 15 0,022
02000
02008-112X050 C M12 6 50 6 7 15 0,032
02008-116X025 C M16 8,5 25 8 10 23 0,028
02008-116X035 C M16 8,5 35 8 10 23 0,039
02008-116X050 C M16 8,5 50 8 10 23 0,058
03000
Order No. Form D1 D2 L SW1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02008-312X025 F M12 6 25 6 7 15 0,015
02008-312X035 F M12 6 35 6 7 15 0,022
04000
02008-312X050 F M12 6 50 6 7 15 0,032
02008-316X025 F M16 8,5 25 8 10 23 0,027
02008-316X035 F M16 8,5 35 8 10 23 0,039
02008-316X050 F M16 8,5 50 8 10 23 0,057
05000
Order No. Form D1 D2 L SW1 Ball- Load capacity Approx.
max. kN weight
(static load only) kg
02008-712X025 K M12 6 25 6 7 2 0,013
02008-712X035 K M12 6 35 6 7 2 0,021
02008-712X050 K M12 6 50 6 7 2 0,031
06000
02008-716X025 K M16 8,5 25 8 10 4 0,024
02008-716X035 K M16 8,5 35 8 10 4 0,035
02008-716X050 K M16 8,5 50 8 10 4 0,054
07000
max. kN weight
(static load only) kg
02008-510X026 O M10 6 26,5 1,5 5 5 - 0,010
02008-510X036 O M10 6 36,5 1,5 5 5 - 0,014
02008-510X051 O M10 6 51,5 1,5 5 5 - 0,022
08000
02008-512X027 O M12 8 27 2 6 7 15,4 0,015
02008-512X037 O M12 8 37 2 6 7 15,4 0,021
02008-512X052 O M12 8 52 2 6 7 15,4 0,033
02008-516X028 O M16 11 28 3 8 10 23,3 0,027
02008-516X038 O M16 11 38 3 8 10 23,3 0,040
09000
02008-516X053 O M16 11 53 3 8 10 23,3 0,060
02008-520X033 O M20 14 33 3 10 13 37,7 0,049
02008-520X053 O M20 14 53 3 10 13 37,7 0,090
02008-520X073 O M20 14 73 3 10 13 37,7 0,128
20000
Order No. Form D1 D2 L L3 SW1 Ball- Approx.
weight
kg
02008-610X028 P M10 8 28,5 3,5 5 5 0,010
02008-610X038 P M10 8 38,5 3,5 5 5 0,014
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
111
Distributed in Romania
by Best TOOLS SRL
02009 info@btools.ro / 0368.412.413
Form C
plain, attened steel insert
Form E Form F Form M
stainless steel insert plain, serrated, attened gripper gripper attened,
attened serration in hard metal
Form K
plain, attened POM insert
Material, surface nish:
Body in tempered steel, heat-treated and black oxide
nish. D2
Ball in rust and acid-resistant steel, hardened and natural O-ring D2 O-ring D2 O-ring D3
10
10
10
nish.
Insert:
4
L3
Form C in tool steel, hardened and black oxide nish.
L3
L3
Form F in tool steel, hardened and black oxide nish.
Form M in tool steel with carbide serration, black oxide
L1
L1
L1
nish.
Form K in white POM.
Form E stainless steel, hardened, natural nish.
Form O stainless steel with diamond surface comparable D1 D1 D1
with abrasive grit size 100. SW1 SW1 SW1
Form P stainless steel with polyurethane surface, Shore
hardness 60.
Sample order:
nlm 02009-720X070
Note:
Toggle locators are used to support and clamp
unmachined and machined workpieces. Form O Form P
In addition, they serve as stops, supports and thrust pads stainless steel insert with stainless steel insert with
diamond surface polyurethane surface
in xture and tool shops.
The ball can be removed from the housing by applying
light pressure to the socket head screw.
O-ring O-ring
Ball is protected against torsion. D2 D3
10
10
Advantages: D2
6
4
L3
L1
D1 SW1 D1
SW1
Order No. Form D1 D2 L1 L3 SW1 Ball- Load capacity Approx. Order No.
max. kN weight steel insert
(static load only) kg
02009-120X030 C M20 10 30 10 10 13 37 0,049 07113-10108
02009-120X050 C M20 10 50 10 10 13 37 0,084 07113-10108
02009-120X070 C M20 10 70 10 10 13 37 0,122 07113-10108
02009-124X040 C M24 12 40 10 10 15 55 0,101 07113-12108
02009-124X080 C M24 12 80 10 10 15 55 0,200 07113-12108
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
112
Distributed in Romania
by Best TOOLS SRL
02009 info@btools.ro / 0368.412.413
01000
Adjustable toggle locators
with O-ring, exchangeable inserts and hexagon socket
02000
03000
Order No. Form D1 D2 L1 L3 SW1 Ball- Load capacity Approx. Order No.
max. kN weight for
(static load only) kg stainless steel insert
02009-220X030 E M20 10 30 10 10 13 37 0,049 07113-10102
04000
02009-220X050 E M20 10 50 10 10 13 37 0,084 07113-10102
02009-220X070 E M20 10 70 10 10 13 37 0,122 07113-10102
02009-224X040 E M24 12 40 10 10 15 55 0,101 07113-12102
02009-224X080 E M24 12 80 10 10 15 55 0,200 07113-12102
05000
Order No. Form D1 D2 L1 L3 SW1 Ball- Load capacity Approx. Order No.
max. kN weight gripper
(static load only) kg
02009-320X030 F M20 10 30 10 10 13 37 0,049 07113-1010
02009-320X050 F M20 10 50 10 10 13 37 0,084 07113-1010
02009-320X070 F M20 10 70 10 10 13 37 0,121 07113-1010
06000
02009-324X040 F M24 12 40 10 10 15 55 0,103 07113-1210
02009-324X080 F M24 12 80 10 10 15 55 0,201 07113-1210
Order No. Form D1 D2 L1 L3 SW1 Ball- Load capacity Approx. Order No.
max. kN weight POM insert
(static load only) kg
07000
02009-720X030 K M20 10 30 10 10 13 4 0,045 07113-10109
02009-720X050 K M20 10 50 10 10 13 4 0,080 07113-10109
02009-720X070 K M20 10 70 10 10 13 4 0,117 07113-10109
02009-724X040 K M24 12 40 10 10 15 7 0,094 07113-12109
08000
02009-724X080 K M24 12 80 10 10 15 7 0,193 07113-12109
Order No. Form D1 D2 D3 L1 L3 SW1 Ball- Load capacity Approx. Order No.
max. kN weight gripper
(static load only) kg
02009-920X030 M M20 10 7,9 30 10 10 13 37 0,049 07113-10107
09000
02009-920X050 M M20 10 7,9 50 10 10 13 37 0,084 07113-10107
02009-920X070 M M20 10 7,9 70 10 10 13 37 0,121 07113-10107
02009-924X040 M M24 12 9,5 40 10 10 15 55 0,103 07113-12107
02009-924X080 M M24 12 9,5 80 10 10 15 55 0,201 07113-12107
20000
Order No. Form D1 D2 L1 L3 SW1 Ball- Load capacity Approx. Order No. for
max. kN weight stainless steel insert,
(static load only) kg diamond surface
02009-520X030 O M20 10 30 10 10 13 37 0,049 07113-10105
02009-520X050 O M20 10 50 10 10 13 37 0,084 07113-10105
02009-520X070 O M20 10 70 10 10 13 37 0,122 07113-10105
21000
Order No. Form D1 D2 D3 L1 L3 SW1 Ball- Load capacity Approx. Order No. for
max. kN weight stainless steel insert,
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
113
Distributed in Romania
by Best TOOLS SRL
02010 info@btools.ro / 0368.412.413
Thrust bolts
D1 -0.2
L3 x 45
0.8
L1 h9
0.8
L2
L4
D2 n6
Material:
0.8
Tool steel.
15
3.2
Surface nish:
Hardened and ground.
Support surface without centring.
Sample order:
nlm 02010-041
Note:
If more than one thrust bolt is used, the support height can
be reground. Thrust bolts can also be used as feet for jigs and
xtures.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
114
Distributed in Romania
by Best TOOLS SRL
02020 info@btools.ro / 0368.412.413
01000
Straight and thrust bolts
to DIN 6321 (Edition 1973)
02000
Form A Form B Form C
thrust bolt cylindrical attened
straight bolt straight bolt
03000
Material:
Tool steel.
04000
0.8
Surface nish:
Hardened and ground.
Support surface without centring.
Sample order:
nlm 02020-212
05000
Note:
Thrust bolts form A serve as a mount for workpieces
and xtures. other dimensions and
Straight bolts form B serve to position workpieces data same as form A
and xture parts in holes with locating dimensions.
06000
The attened form C can be used to bridge tolerances
in hole spacing or to secure the part to be positioned
in one direction only.
Form A and B can also be used as hardened stop and
as foot for xtures. Straight and thrust bolts
For similar bolts see 03120, 03130, 03140 and
07000
03150. Order No. Form D1 L1 D2 L2 L3 T Approx.
weight
g
02020-106 A 6 5 4 6 1,2 0,02 1,5
02020-110 A 10 6 6 9 1,6 0,02 5,5
08000
02020-116 A 16 8 8 12 2 0,04 16,0
02020-125 A 25 10 12 18 2,5 0,04 50,0
09000
Form B Form C weight
g
02020-206 02020-406 short 6 7 4 6 1,2 4 -/1 0,02 2
02020-208 02020-408 short 8 10 6 9 1,6 6 -/1,6 0,02 6
02020-210 02020-410 short 10 10 6 9 1,6 6 -/2,5 0,02 7
20000
02020-212 02020-412 short 12 10 6 9 1,6 6 -/2,5 0,02 8
02020-216 02020-416 short 16 13 8 12 2 8 -/3,5 0,04 21
02020-220 02020-420 short 20 15 12 18 2,5 9 -/5 0,04 46
02020-225 02020-425 short 25 15 12 18 2,5 9 -/5 0,04 66
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
115
Distributed in Romania
by Best TOOLS SRL
02028 info@btools.ro / 0368.412.413
Thrust bolts
Material:
Body in tempered steel.
Surface nish:
Body heat-treated with black oxide nish.
Sample order:
nlm 02028-106012
Note:
The thrust bolts act as supports for rough and machined
parts and as stops. They can also be integrated into
standard clamping or support elements. To change these
parts into male threaded feet, just screw and glue a grub
screw or threaded stud in tap D.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
116
Distributed in Romania
by Best TOOLS SRL
02029 info@btools.ro / 0368.412.413
01000
Thrust bolts with positioning pin
02000
Form A Form B Form C
face surface convex surface serrated surface
03000
H1 0,25
H1 0,01
H1 0,1
Material:
Body in tempered steel.
Surface nish:
04000
Body heat-treated with black oxide nish.
Support surfaces case-hardened.
D1 0,1
Sample order:
nlm 02029-106012
Note:
05000
The thrust bolts act as supports for rough and machined
parts and as stops. They can also be integrated into
standard clamping or support elements. To change these
parts into male threaded feet, just screw and glue a grub
screw or threaded stud in tap D.
06000
07000
08000
09000
Order No. Form D D1 D2 D3 E H H1 P R T Approx.
weight
kg
02029-106012 A M6 11,9 7 - 4 16,5 12,5 6 - 17 0,042
02029-106025 A M6 11,9 7 - 4 29 25 6 - 17 0,062
02029-110020 A M10 17,8 10 - 7 25 20 10 - 24 0,130
20000
02029-110040 A M10 17,8 10 - 7 46 40 10 - 24 0,180
02029-116030 A M16 25,8 20 - 13 40 30 16 - 41 0,295
02029-116060 A M16 25,8 20 - 13 70 60 16 - 41 0,480
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
117
Distributed in Romania
by Best TOOLS SRL
02030 info@btools.ro / 0368.412.413
Feet
with threaded pin, DIN 6320 (Edition 1971)
H B SW
Form A
D2
with smooth
D1
E
support surface
15
H B
Form B
Material: with hard metal tips
D1
D2
Tempered steel 1.1172.
Surface nish:
15
Black oxide nish.
Sample order:
nlm 02030-10
Note:
Thrust bolts 02010 and 02020 can also be used as feet.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
118
Distributed in Romania
by Best TOOLS SRL
02035 info@btools.ro / 0368.412.413
01000
Tie-rod bolts
02000
D1
E
C SW
03000
A B
Material:
Tempered steel
Surface nish:
Black oxide nish
04000
Sample order:
nlm 02035-120750
Note:
Extension pieces are used to lengthen toggle locators,
spring-mounted press-on studs, positioning feet support
05000
bolts and similar xings.
06000
07000
08000
09000
20000
Order No. A B C D D1 E SW Approx.
weight
kg
02035-08025 25 13 15 M8 M8 15 13 0,035
02035-08032 32 13 15 M8 M8 15 13 0,043
21000
02035-08040 40 13 15 M8 M8 15 13 0,051
02035-10025 25 15 17 M10 M10 19,6 17 0,056
02035-10032 32 15 17 M10 M10 19,6 17 0,065
02035-10040 40 15 17 M10 M10 19,6 17 0,085
02035-120320 32 18 20 M12 M12 25,4 22 0,095
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
119
Distributed in Romania
by Best TOOLS SRL
02037 info@btools.ro / 0368.412.413
Support bolts
Material:
Tempered steel, heat-treated.
locking nut
Surface nish:
Black oxide nish.
Sample order:
nlm 02037-16016
Note:
The rounded nose allows support bolts to be used as
positioning elements for workpieces with holes too.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
120
Distributed in Romania
by Best TOOLS SRL
02040 info@btools.ro / 0368.412.413
01000
Positioning feet
02000
Form A Form B Form C
with external thread with external thread with external thread
and face surface and convex surface and serrated surface
natural
nish convex
03000
Material:
Free-cutting steel.
04000
Surface nish:
Case-hardened with black oxide nish.
Sample order:
nlm 02040-215
05000
Note:
Positioning feet are used as supports, stops and
plungers for jigs and xtures, as well as in general
machine and appliance construction.
Form D Form E Form F
with internal thread with internal thread with internal thread
06000
and face surface and convex surface and serrated surface
natural
nish convex
07000
08000
Order No. Order No. Order No. D L1 D1 L2 E SW Tightening torque Approx.
09000
Form A Form B Form C max. Nm weight
kg
02040-1101 02040-2101 02040-3101 M8 10 17 20 19,4 17 18 0,024
02040-110 02040-210 02040-310 M12 10 22 24 25,2 22 60 0,040
02040-115 02040-215 02040-315 M12 15 22 29 25,2 22 60 0,056
20000
02040-1151 02040-2151 02040-3151 M16 15 30 34 33 30 140 0,130
02040-1201 02040-2201 02040-3201 M16 20 30 39 33 30 140 0,155
kg
02040-415 02040-515 02040-615 M8 15 17 6 19,4 17 0,023
02040-4251 02040-5251 02040-6251 M8 25 17 16 19,4 17 0,040
02040-420 02040-520 02040-620 M12 20 22 10 25,2 22 0,052
02040-425 02040-525 02040-625 M12 25 22 15 25,2 22 0,065
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
121
Distributed in Romania
by Best TOOLS SRL
02041 info@btools.ro / 0368.412.413
Positioning feet
Form A Form B
hardened face surface face surface,
hardened and ground
Material:
Body in tempered steel.
Surface nish:
Body heat-treated with black oxide nish.
Support surfaces case-hardened.
Sample order:
nlm 02041-106010
Note:
The positioning feet act as supports for rough and machined Form C Form D
parts and as stops. They can also be integrated into standard hardened convex surface heat-treated serrated surface
clamping or support elements.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
122
Distributed in Romania
by Best TOOLS SRL
02050 info@btools.ro / 0368.412.413
01000
Jig feet
with threaded pin
02000
+0,3
H +0.2 B
3 B1 SW
1.6
03000
D f8
D1
D2
Material:
E
Tempered steel 1.1181.
Surface nish:
3.2
Black oxide nish. 0.5x45
04000
Sample order:
nlm 02050-10X75 (please also indicate dimension H)
05000
06000
Order No. H B B1 D D1 D2 E SW
07000
Application: drilling jig
08000
09000
20000
21000
22000
23000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
123
Distributed in Romania
by Best TOOLS SRL
02070 info@btools.ro / 0368.412.413
Jig feet
with internal thread
Form A Form B
hardened face surface face surface,
hardened and ground
Material:
Body in tempered steel.
Surface nish:
Body heat-treated with black oxide nish.
Support surfaces case-hardened.
Sample order:
nlm 02070-106X20
Note:
The jig feet with internal thread act as supports for rough and Form C Form D
machined parts and as stops. They can also be integrated into hardened convex surface heat-treated serrated surface
standard clamping or support elements.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
124
Distributed in Romania
by Best TOOLS SRL
02080 info@btools.ro / 0368.412.413
01000
Toggle locators
swivel 12
02000
Form C Form F
with external thread with external thread
plain, attened ball serrated, attened ball
03000
Material:
Body in tempered steel.
04000
Ball in ball-bearing steel 1.3505.
Surface nish:
Body heat-treated, ball hardened (50 - 55 HRC).
Sample order:
nlm 02080-106
05000
Note:
The toggle locators serve as stops, supports and pressure pads
in the xture construction. They can also be installed in existing
clamping devices, e.g. arness clamping device.
06000
Ball is protected against torsion.
07000
08000
09000
20000
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
125
Distributed in Romania
by Best TOOLS SRL
02090 info@btools.ro / 0368.412.413
Locating feet
Material:
Hardened steel 1.0301.
Surface nish:
Case-hardened with black oxide nish.
Sample order:
nlm 02090-08
02110
Swivel pads
H2
D1
SW H1
Material:
Ball element in case-hardened free-cutting steel. H
Pressure pad in free-cutting steel ETG 100.
Surface nish:
Black oxide nish.
20
Sample order:
nlm 02110-10
Order No. D D1 H H1 H2 SW F Approx.
max. N weight
kg
02110-05 M5 13 16,5 6,5 4 10 1620 0,012
02110-06 M6 13 16,5 8,5 4 10 2330 0,011
02110-08 M8 16 21 9 4 13 4150 0,023
02110-10 M10 19 23 10 4 17 6480 0,035
02110-12 M12 22 25,5 12 4,7 19 8320 0,052
02110-16 M16 25 29,5 14 5 24 13940 0,074
02110-20 M20 32 36 18 8,5 30 21000 0,138
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
126
Distributed in Romania
by Best TOOLS SRL
02130 info@btools.ro / 0368.412.413
01000
Thrust pins
02000
03000
H 0,25
Material:
Hardened steel 1.0301.
04000
Surface nish:
Case-hardened, black oxide nish and ground.
Sample order:
nlm 02130-05X8 (please also indicate dimension H) Order No. H B D D1 R
05000
02130-05X 8/10/12/16 5 4 5 7
02130-06X 10/12/16/20 6 5 6 8
02130-08X 12/16/20/25 8 6 8 11
02130-10X 16/20/25/32 10 8 10 14
06000
02130-12X 20/25/32/40 12 10 12 16
02130-14X 20/25/32/40 14 12 14 20
02130-16X 25/32/40/50 16 14 16 25
02130-20X 25/32/40/50 20 16 20 28
07000
02150
Adjustable thrust bolts
08000
with counternut
H2
SW H1 H4
09000
D1
D
E
F
Material:
Tempered steel 1.1181. 1.5xD H3
20000
H R
Surface nish:
Surface hardened and black oxide nish. Order No. D D1 H H1 H2 H3 H3 H4 E SW R F Approx.
min. max. approx.N weight
Sample order: kg
nlm 02150-05 02150-05 M5 5 50 32 40 20,5 42,5 5 11,5 10 7 1000 0,019
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
127
Distributed in Romania
by Best TOOLS SRL
02153 info@btools.ro / 0368.412.413
Thrust bolts
A
B
Material: D
Tempered steel, heat-treated with black
oxide nish.
Sample order:
SW
nlm 02153-16055
Note:
E
The versions 02153-12148 and 02153-
16155 are made of brass.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
128
Distributed in Romania
by Best TOOLS SRL
02155 info@btools.ro / 0368.412.413
01000
Jack screws
02000
A C
B G
03000
F
E
D
Material:
Tempered steel.
04000
Surface nish:
Black oxide nish.
Sample order:
nlm 02155-0803006
05000
06000
07000
08000
Adjustable support that accepts
different tops.
screw support
09000
jack screw
20000
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
129
Distributed in Romania
by Best TOOLS SRL
02160 info@btools.ro / 0368.412.413
Stop, adjustable
with end position feedback
D1
H
SW
L
L1
Material, surface nish: D
Screw and plunger in stainless steel 1.4301, natural nish. M8x1
Guide bush in stainless steel 1.4112, natural nish.
Sensor housing in stainless steel, natural nish. LED-indicator
Inductive sensor:
make contact (NO) M5x0,5
operating voltage 10 - 30 V DC
operating current 100 mA
sensing distance 0.8
protection class: IP 67
connection type: 0.3 m cable, PUR, with plug connector
temperature range: -25C - +70C
approvals: CE, c-UL-us
Sample order:
nlm 02160-080352
Note:
The ensured sensing distance is achieved if the plunger is
actuated ush up to the stop surface of the guide bush. The
sensor is supplied unassembled.
Connection diagram:
BN = brown
BK = black
BU = blue
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
130
Distributed in Romania
by Best TOOLS SRL
02170 info@btools.ro / 0368.412.413
01000
Bolt stops
with at surface, in steel
02000
centre hole for 02210
D5
03000
Material:
Tempered steel
Surface nish:
Painted, trapezoidal thread - self-locking, spindle has end
04000
lock
Sample order:
nlm 02170-02
Note:
The version 02170-01 has no centring hole 12. Order No. D D1 D2 D3 D4 D5 H H1 H2 S S1 F Approx.
05000
max. kN weight
kg
02170-01 31 31 Tr 20 x 4 23 4 4 38 52 23 8 2 15 0,190
02170-015 50 49 Tr 30 x 4 36 6 6 42 52 24 12 2 60 0,550
02170-02 50 49 Tr 30 x 4 36 6 6 50 72 30 12 0,5 60 0,620
06000
02170-03 50 49 Tr 30 x 4 36 6 6 71 102 43 16 1,5 60 0,900
02170-04 65 70 Tr 40 x 7 43 6 6 100 140 58 25 2,5 100 2,635
02170-05 70 80 Tr 50 x 8 55 6 6 140 212 90 30 4 170 4,600
02170-06 80 100 Tr 65 x 10 70 6 8 190 300 126 34 5 350 9,000
07000
02180
Bolt stops
08000
with at surface, in aluminium
centre hole
for 02210
09000
Material:
Aluminium (400 N/mm tensile strength); spindle in tempered
20000
steel
Surface nish:
Self-locking trapezoidal thread, spindle has an integral brake
Sample order:
21000
nlm 02180-01
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
131
Distributed in Romania
by Best TOOLS SRL
02182 info@btools.ro / 0368.412.413
centre hole
for 02210
Material:
Aluminium (400 N/mm tensile strength); spindle in
tempered steel
Surface nish:
Self-locking trapezoidal thread, spindle has an integral
brake
Sample order: magnetic plate
nlm 02182-01
Note:
Suitable for horizontal and vertical applications. Long-
lasting and accurate positioning of the workpiece
vertically can be achieved with the Magnetic Foot.
02190
Atlas bolt blocks
with counter bolt
02190-01 02190-03
02190-02 02190-04
Material:
Tempered steel
12x11
centre hole
Surface nish: for 02210
Hammer nished, spindle has 30 x 6
trapezoidal thread
Sample order:
nlm 02190-03
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
132
Distributed in Romania
by Best TOOLS SRL
02210 info@btools.ro / 0368.412.413
01000
Convex insert, centring plate, vee-block inserts,
locating inserts, insert with revolving ball
02000
convex insert centring plate
03000
Material:
Tempered steel
Surface nish:
04000
Heat-treated and black oxide nish; ball hardened
Sample order: vee-block insert locating insert
nlm 02210-021
Note:
Can be used with
05000
02170
02180
02182
02190
02320
02330-020
06000
02350-010
insert with
revolving ball
07000
08000
Order No. Surface nish Approx.
weight
kg
09000
02210-01 convex insert 0,090
02210-03 centring plate 0,120
20000
max. min. weight
kg
02210-02 vee-block insert 50 10 45 42 23 32 0,120
02210-021 vee-block insert 100 22 65 62 38 56 0,545
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
133
Distributed in Romania
by Best TOOLS SRL
02240 info@btools.ro / 0368.412.413
+
Material:
Compact tensioning blocks: tempered steel
Surface nish:
Compact tensioning blocks: tempered
Sample order:
nlm 02240-75
Note:
Compact tensioning blocks are steel units of underlying plates,
which are solidly attached to each other by an axle. The discs can
be rotated individually and engage at 90; this allows them to be
used horizontally and vertically.
Every drop height required can be adjusted by a handle. All sizes
can be combined.
Order No. Surface nish max. Clamping height Clamp stages H1 Base surface Clamping surface A1 x B Approx.
AxB weight
kg
02240-30 compact tensioning block 30 11 2 50x35 20x35 0,380
02240-46 compact tensioning block 46 13 3 50x35 20x35 0,600
02240-85 compact tensioning block 85 26 3 50x35 20x35 1,100
02240-50 compact tensioning block 48 11 4 60x50 26x50 1,150
02240-102 compact tensioning block 102 24 4 60x50 26x50 2,330
02240-75 compact tensioning block 77 14 5 90x80 40x80 4,000
02240-150 compact tensioning block 153 29 5 90x80 40x80 8,150
02240-35 compact tensioning block with a magnetic baseplate 35 11 2 50x35 20x35 0,400
02240-51 compact tensioning block with a magnetic baseplate 51 13 3 50x35 20x35 0,650
02240-55 compact tensioning block with a magnetic baseplate 55 11 4 60x50 26x50 1,200
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
134
Distributed in Romania
by Best TOOLS SRL
02270 info@btools.ro / 0368.412.413
01000
Universal-tensioning bases
02000
Material:
Tempered steel B
Surface nish:
03000
Painted
H
Sample order:
nlm 02270-02
H
Note:
04000
You will nd a combination of these universal tensioning bases
under 02310.
Universal-tensioning bases can also be used in conjunction
with step-toothed spanners 04070. B B 30
05000
Horizontal step height: 2.3 mm
application example:
Order No. B H Support height Support height Approx.
06000
max. min. weight
kg
02270-01 19 32 51 22 0,090
02270-02 35,5 65 107 39 0,300
02270-03 68 130 208 71 1,050
07000
02310
Set of universal-tensioning bases
08000
Material:
Tempered steel
Surface nish:
Painted
09000
Sample order:
nlm 02310-01
Note:
The special arrangement of teeth allows these bases to be used in
20000
a vertical and horizontal position. The complete set in its wooden
case comprises 20 parts which are interchangeable and provide
many possible uses. These bases can also be ordered separately.
See 02270. Universal-Tensioning Bases can also be used in
conjunction with step-toothed spanners 04070.
21000
22000
4 ea. No. 03
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
135
Distributed in Romania
by Best TOOLS SRL
02320 info@btools.ro / 0368.412.413
Height-adjustable wedges
centre hole 48
for 02210
02320-50
12 H11
Material: centre hole
Tempered steel and spheroidal cast iron for 02210
Surface nish:
Tempered and black oxide nished; 02320-100
surface of wedges nely machined
Sample order:
nlm 02320-50
Note: 12 H11
Sensitive adjustments made using the edged bolt or
hexagonal spanner. This results in vertical movement
with no lateral displacement. Particularly suited for
moving or machining heavy parts. One set of 02210-
01 balls is included with every height wedge. Order No. Clamping range L B height adjustment F Approx.
per spindle turn kN weight
kg
02320-50 50 - 63 63 40 0,86 40 1,300
02320-100 100 - 125 125 115 1,16 100 8,600
02330
Cylindrical support elements
02330-020 02330-040
WKUHDGHGKROHIRU
Material:
Tempered steel 1.1181
FHQWUHKROH
Surface nish: IRU
Black oxide nish
Sample order:
VSULQJIRUFH1
nlm 02330-40
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
136
Distributed in Romania
by Best TOOLS SRL
02333 info@btools.ro / 0368.412.413
01000
Adjustable supports
02000
F
A L
E stroke
B
03000
D
F1
F2
Material:
Tempered steel
04000
K
Surface nish:
Base body black oxide nish; thrust bolt hardened and black oxide
nish
F
Sample order:
nlm 02333-08023
05000
H
06000
G
07000
08000
09000
20000
02333
adjustable
support
21000
02035
tie-rod bolt
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
137
Distributed in Romania
by Best TOOLS SRL
02334 info@btools.ro / 0368.412.413
Work supports
E
M
ball pressure screw L
Material:
Tempered steel.
F1
Surface nish:
D
F2
Base body black oxide nish; piston heat-
C
treated and black oxide nish
G
Sample order:
nlm 02334-06029
J A N
through hole for socket
F K head screw DIN 912
B
torsion protection
screw support
hexagon nut
02334
work support
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
138
Distributed in Romania
by Best TOOLS SRL
02335 info@btools.ro / 0368.412.413
01000
Work support cylinders
02000
cutting view A-A
F A
SW hexagon
socket wrench
03000
B
K
Material:
Tempered steel
04000
F1
Surface nish: F2
D
Base body black oxide nish;
C
piston hardened and black oxide nish
G
Sample order:
nlm 02335-06039
05000
L
ball pressure screw
E
J
mounting screw
06000
A A
07000
M
grub screw with hexagon socket
08000
09000
screw support
hexagon nut
20000
21000
02335
work support cylinder
ball pressure screw
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
139
Distributed in Romania
by Best TOOLS SRL
02340 info@btools.ro / 0368.412.413
Spacing element
load bearing
capacity N
max. 8 kN
55
M8
10,5
40
travel path
78-83
SW 6
Material:
Base body in hardened steel;
housing in aluminium unlock lock
25
Surface nish:
16
10
Base body nitrided, manganese phosphate treated and
ground;
housing red anodized
grub screw M12x30 DIN 913 (exchangeable)
Sample order:
nlm 02340-0508 49,4
nuts for T-slots M12x14 DIN 508
Note:
The support element serves to support over-determined A
component clamping points. It prevents vibrations and
bending during processing.
cutting view A
Method of operation:
1. By turning the clamping cam (hexagon socket SW 6) on
M6
the shell of the red protective sleeve, the supporting bolt
is fastened to the workpiece with easy spring force.
SW 21
2. By continuing to turn to stop (lock), the supporting bolt
gripping mechanism locks without change of travel.
3. By turning in the opposite direction (unlock), the
clamping is loosened. By continuing to turn in reverse to
stop, the supporting bolt drives into nal position.
13 13
Assembly:
Fasten the support elements with connection thread M6
onto the device.
Alternatively: Substitute grub screw M2x10 with grub
screw M12x30 and install the support element with
spanners (SW 21; e.g., for T-slot fastening).
For safe operation, the threaded hole M12 must always be
closed.
It is possible to countersink the support element by 16 mm.
Thread M8 can be accommodated with various thrust bolts.
Delivery with grub screw M12x30 and nut for T-slot
M12x14 (DIN 508).
unlock lock unlock lock
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
140
Distributed in Romania
by Best TOOLS SRL
02350 info@btools.ro / 0368.412.413
01000
Rectangular support elements
02000
02350-010 02350-030 WKUHDGHGKROHIRU
FHQWUHKROH
IRU
03000
Material:
Casing GJL 250; press-on bolts and locking parts: tempered
steel
Surface nish:
04000
Housing painted, steel parts black oxide nish
Sample order:
nlm 02350-030
05000
06000
07000
08000
09000
20000
21000
22000
02350-030 30 0,950
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
141
Distributed in Romania
by Best TOOLS SRL
02360 info@btools.ro / 0368.412.413
Spacing elements
Material:
Steel
Surface nish:
Case-hardened, black oxide nish and ground
adjusting screw
Sample order:
nlm 02360-006
Note:
The support element is used for support in milling, drilling, planing
ad grinding work, in order to prevent the workpiece from sliding or
moving away.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
142
Distributed in Romania
by Best TOOLS SRL
02380 info@btools.ro / 0368.412.413
01000
Compensating clamps
02000
compensation
travel
03000
Material:
Steel
04000
Surface nish:
K
Case-hardened, black oxide nish and ground
Sample order:
nlm 02380-150
Note:
05000
The Non-vibrating support is used for support in
milling, drilling, planing and grinding work in order to
prevent the workpiece from slipping or moving away.
The compensating clamp allows the workpiece to be
supported quickly, accurately and without grasping
the workpiece underneath. The support bolt contacts
06000
with very slight spring froce. It can be tightened in any
position. Threaded pins of any kind can be screwed into
the internal thread of the support bolt, in order to change
the support height.
07000
vibrating supports have only 1 groove.
08000
09000
20000
21000
(N) weight
kg
02380-75 65 85 75 35 13 - 8,5 30 10 M8 13 19,5 3 11,5 - 500 0,255
02380-150 80 165 150 90 20 - 13 50 25 M10 20 24 6 14 15 2500 1,200
02380-170 110 190 170 100 25 - 17 60 20 M16 26 34 11 21,5 - 5000 2,400
23000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
143
Distributed in Romania
by Best TOOLS SRL
02385 info@btools.ro / 0368.412.413
Jack screws
Material:
Tempered steel
Surface nish:
Black oxide nish; adjustment spindle tempered
Sample order:
nlm 02385-16100
Note:
The contact surface can be altered to the conditions using inserts,
see 02387.
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
144
Distributed in Romania
by Best TOOLS SRL
02387 info@btools.ro / 0368.412.413
01000
Inserts
02000
convex insert taper insert vee-block insert
30 90
30
30 90
Material: 24
Tempered steel R30 5
03000
6
18
18
Surface nish:
10
5
Heat-treated at 1100-1200 N/mm and black oxide nish
10
10
10
Sample order: 10 g6 10 g6 10 g6
nlm 02387-02
04000
05000
06000
07000
08000
09000
20000
21000
22000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
145
Distributed in Romania
by Best TOOLS SRL
02388 info@btools.ro / 0368.412.413
E
B A C H
D
G
F
Material:
Tempered steel
Surface nish:
Black oxide nish
Sample order:
nlm 02388-08040
screw support
adjustable
jack screw
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
146
Distributed in Romania
by Best TOOLS SRL
02390 info@btools.ro / 0368.412.413
01000
Eccentric supports
02000
03000
A 0,01
Material:
Special machining steel
04000
Surface nish:
Tempered and black oxide nish;
support surfaces ground C
through hole for hexagon
Sample order: socket screw DIN 912
nlm 02390-10040
05000
06000
Order No. A B C D E Approx.
Through hole weight
for kg
02390-08016 16 25 M8 7 3,5 0,050
07000
02390-08020 20 25 M8 7 3,5 0,055
02390-08025 25 25 M8 7 3,5 0,070
02390-08032 32 25 M8 7 3,5 0,085
02390-08040 40 25 M8 7 3,5 0,105
08000
02390-08050 50 25 M8 7 3,5 0,130
02390-10020 20 32 M10 9 5 0,100
02390-10025 25 32 M10 9 5 0,120
02390-10032 32 32 M10 9 5 0,155
02390-10040 40 32 M10 9 5 0,190
09000
02390-10050 50 32 M10 9 5 0,235
02390-10063 63 32 M10 9 5 0,280
02390-12020 20 40 M12 7 7 0,155
02390-12025 25 40 M12 12 7 0,205
02390-12032 32 40 M12 12 7 0,255
02390-12040 40 40 M12 12 7 0,315
20000
02390-12050 50 40 M12 12 7 0,390
02390-12063 63 40 M12 12 7 0,475
02390-12080 80 40 M12 22 7 0,610
21000
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
147
Distributed in Romania
by Best TOOLS SRL
info@btools.ro / 0368.412.413
Notes
http://www.btools.ro/produse/standardizate-norelem/seria-02000/detalii/
148