Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PC300HD-7
MATERIAL HANDLER
PC
300
HD
MATERIAL HANDLER
MATERIAL HANDLER
The Komatsu PC Material Handling series is a full product line with solutions for
all of your material handling needs. Komatsu...the unparalleled, one-stop shopping
source for rugged and cutting edge material handling equipment!
2-Piece Front Model: KO2US48 3-Piece Front Model: KO2US46 Cylinder Group
Description Boom Stick Description Boom Stick J1B Description 2-Piece 3 Piece
Length mm 8280 6960 Length mm 7010 4369 3429 Front Front
ft in 27'2" 22'10" ft in 23'0" 14'4" 11'3" Length mm 2438 2591
Width mm 965 483 Width mm 940 610 533 ft in 8'0" 8'6"
ft in 3'2" 1'7" ft in 3'1" 2'0" 1'9" Width mm 1118 1422
Height mm 1143 1702 Height mm 1092 864 686 ft in 3'8" 4'8"
ft in 3'9" 5'7" ft in 3'7" 2'10" 2'3" Height mm 559 559
Weight kg 3447 1701 Weight kg 3175 1451 635 ft in 1'10" 1'10"
lb 7,600 3,750 lb 7,000 3,200 1,400 Weight kg 1318 1656
lb 2,900 3,650
Height Height
Height
Length
Length
Length
Shipping Configuration
92'' 92''
86'' 86''
M AT E R I A L H A N D L E R
PC300HD-7
Lift Performance
Young 2-Piece Front — 14.6 m 48' Young 3-Piece Front — 14.0 m 46'
(KO2US48) (KO2US46)
Reach (ft.) Reach (ft.)
60 55 50 45 40 35 30 25 20 15 10 5 0 60 55 50 45 40 35 30 25 20 15 10 5 0
65 65
60 60
55 55
41.4
50 29.7
50
11.0 13.5 16.8 21.5 28.9 41.9 13.2 16.6 20.7 26.2 37.6 64.1
20 7.8 9.7 12.2 15.7 21.1 30.1
20 9.4 12.0 14.9 18.5 26.2 42.8
10.9 13.2 16.3 20.8 27.7 39.9 66.9 10.5 13.0 15.8 19.0 25.1 37.1 63.8 159.7
15 15 7.3 9.2 11.2 13.3 17.5 25.7 42.6 87.1
7.7 9.5 11.8 15.1 20.0 28.4 45.3
10.7 12.9 15.8 20.0 26.4 37.5 10.4 12.8 15.4 18.7 24.6 36.3 62.3 161.0
10 10 9.0 10.9 13.1 17.1 25.1 41.3 88.1
*7.5 9.1 11.3 14.3 18.8 26.2 7.2
10.5 12.6 15.3 19.2 25.1 35.2 10.3 12.5 15.4 19.1 24.3 35.4 60.3 147.2
5 5 7.1 8.7 10.9 13.4 16.8 24.2 39.6 78.6
7.3 8.8 10.8 13.5 17.6 24.1
10.4 12.3 14.8 18.5 24.0 33.3 53.2 10.2 12.2 15.0 18.9 24.9 35.2 57.3 138.2
0 7.2 8.6 10.4 12.9 16.5 22.4 33.7 0 7.0 8.4 10.5 13.2 17.4 24.1 37.1 72.4
10.3 12.1 14.5 17.9 23.2 32.1 51.4 12.0 14.6 18.3 23.8 33.7 54.5 133.9
-5 -5 8.2 10.1 12.7 16.3 22.7 34.7 69.4
7.1 8.3 10.0 12.4 15.8 21.4 32.3
11.9 14.3 17.6 22.7 31.5 50.7 -10 11.9 14.3 17.9 23.3 32.6 52.8 130.5
-10
8.2 9.8 12.0 15.3 20.8 31.7 8.2 9.9 12.3 15.8 21.7 33.3 67.1
14.2 17.5 22.5 31.3 14.3 17.7 22.9 32.1 52.2 130.8
-15 -15
9.8 11.9 15.2 20.7 9.8 12.1 15.5 21.3 32.8 67.3
-20 -20
-25 -25
1. Lifting capacities shown do not exceed 75% of minimum tipping loads of 4. The least stable position is over the side.
87% of hydraulic capacities. Data supplied by AEM. 5. The operator should be fully acquainted with the Operation Manual
2. Lifting capacities shown should not be exceeded. Weight of all lifting before operating the machine.
accessories must be considered part of the load. 6. Capacities apply only to the machine equipped as stated here.
3. Lifting capacities assume the machine is standing level on a firm, uniform 7. Capacities are based on PCSA gross rated loads.
supporting surface. The user must make allowances for unfavorable job
conditions such as soft or uneven ground or sudden stopping of loads.
Grapple Selection Guide Typical 4-Tine Grapple (Orange Peel)
Komatsu
Model PC300HD-7
Recommended Young
Grapple Model LO-125B LO-150B
46' front 48' front
Size m3 1.6 2.0
yd3 1.3 1.5
Weight kg 1973 2109
lb 4,350 4,650
mm 2362 2489
A
in 93 98
mm 2464 2591
B
in 97 102
mm 2845 2946
C
in 112 116
mm 1600 1753
D Grapple Applications: General Material Weights:
in 63 69
mm 210 210
E Select a grapple whose weight 1. Steel scrap, clippings
in 8.25 8.25
including material does not compressed or bundled
mm 76.2 76.2
F exceed the lift capacity shown for weighs approximately
in 3.0 3.0
mm 2007 2134 your specific machine. 912 kg 2,025 lbs per yd3.
G
in 79 84 2. Shredded steel scraps,
Note: Conditions and material densities vary.
Confirm your specific load density before deter- unprepared weighs approxi-
mining safe machine balance.
mately 608 kg 1,350 lbs per yd3.
T = Typical M = Maximum
Magnet Applications: Legend: A: Pig iron and #1 hot melt; refers in general
to low iron content slag or slabs.
Select a magnet whose weight, including lifted
material, does not exceed the lift capacity shown B: #2 broken; scrap steel or cut offs.
for your specific machine.
C: Steel turnings; scrap from machining
processes.
STANDARD EQUIPMENT
Engine and its related items: Hydraulic controls:
● Air cleaner, double element dry ● HydrauMind (Hydraulic Intelligence New Design)
● Cooling fan, with fan guard system, a closed center system with load
sensing valves and pressure compensated valves
Electrical system:
● 1 gear pump for control circuit
● Alternator, 60 Amp, 24V
● 1 axial piston motor for swing with single stage
● Batteries, 2 x 12V, 250 Ah relief valve
Undercarriage: ● 1 axial piston motor per track for travel with
● 800 mm 31.5" triple grouser shoes counter balance valve
● 7-track/2 carrier rollers (each side) ● 2 variable capacity piston pumps
● Hydraulic track adjusters (each side) ● 3 control valves, 5+4+4 spools (boom, arm,
bucket, swing, LH & RH travel)
● Track guiding guard (each side)
● Control levers, wrist control levers for arm, boom,
Guards and covers: bucket, and swing with PPC system
● Dust-proof net for radiator and oil cooler ● Control levers and pedals for steering and travel
● Pump/engine room partition cover with PPC system
● Revolving frame undercover ● Oil cooler
Operator environment: ● In-line high pressure filter
● Auto air conditioner with defroster Drive and brake system:
● Cab features: Viscous mount, all weather sound suppression with ● Brakes, hydraulic lock travel brakes, oil disc parking,
tinted safety glass windows, pull-up front window with lock device, and swing holding brake
roof window, lockable door, two intermittent window wipers and ● Hydrostatic, 2 travel speed system with planetary
washer, floormat, cigarette lighter, ashtray, heater with defroster, double reduction final drive
storage box, hot/cool box, one piece right window, and antenna
Other standard equipment:
● Inclined dashboard
● Automatic swing holding brake
● Handrails for machine cab
● Corrosion resister
● Multi-function color monitor system with electrically-controlled
throttle lever, electric service meter, gauges (coolant temp and ● Counterweight, 1043 kg 2,300 lb
fuel level), caution lights (electric charge, engine, oil pressure, and ● Horn, air
air cleaner clogging), indicator lights (engine preheating and swing ● Marks and plates, English
lock light), level check light (coolant, engine oil, and hydraulic oil ● One-touch engine oil drainage
level), self-diagnostic system with trouble data memory
● Paint, Komatsu standard
● Rearview mirrors, RH and LH
● PM tune-up service connector
● Retractable 76 mm 3" seat belt
● Remote greasing for radiator fan drive
● Seat, fully adjustable with suspension
● Travel alarm
● Wide catwalk and large handrails
● Vandalism protection locks
OPTIONAL EQUIPMENT
● Boom ● Head guard (FOG)
— 14.0 m 46' 3-piece MH front ● 20 kW hydraulic drive generator (requires 3352 mm 11' riser)
— 14.6 m 48' 2-piece MH front ● Revolving frame undercover (HD)
● Cab front full guard ● Shoes
● Cab riser — 700 mm 28" triple grouser
— 1981 mm 78" manual tilt ● Track roller guards (full length)
— 3352 mm 11' up and 1219 mm 4' forward ● Track frame undercover
● Grapples
— 0.96 m3 1.25 yd3 orange peel
— 1.15 m3 1.50 yd3 orange peel