Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SEMINAR REPORT
E-CALL
BACHELOR OF TECHNOLOGY
In
MECHANICAL ENGINEERING
Submitted to Submitted by
Mr. Rakesh Kumar Gangwar Jitin Kumar
Mr. Vikas Rastogi Roll No-1508240063
(Assistant Professor)
Session: 2017-2018
i
CERTIFICATE
This is to certify that report entitled E-Call which is submitted by us in partial fulfillment
of the requirement for the award of Degree in Mechanical Engineering, MIT, Moradabad is
ii
ACKNOWLEDGEMENT
On the very outset of this report we would like to extend our sincere and artful obligation
towards Mr. Rakesh Kumar Gangwar, Assistant Professor, seminar incharge Mr. Rakesh
Kumar Gangwar & Mr. Vikas Rastogi who have helped us in this internship. Without their
active guidance, help, cooperation & encouragement we would not have made headway in
Our heartfelt gratitude goes to all faculty members and staff of Mechanical Engineering
Department, who with their encouraging and caring words and most valuable suggestions
We indebted to all our classmates for taking interest in discussing our problem and
encouraging us.
We owe a debt of gratitude to our parents for their consistent support, sacrifice, candid views,
Last but not the least we are thankful to the Almighty who gave us the strength and health for
Signature......................
Name.............................
Roll No..........................
Date...............................
iii
TABLE OF CONTENT
Chapter 1 Introduction 1
Chapter 2 Relevance 2-6
2.1 Need To Reduce The Accident Response Time 3
2.2 ARDWARES Required 3
2.3 Elements in E-call 4
2.3.1 PSAP (Public Service Access Point) 4
2.3.2 MDS (Minimum Data Set) 4
2.3.3 Emergency Call Number E112 5
2.4 Principle 5
2.5 Working 6
Chapter 3 Future Scope 7-15
3.1. E-Call IVS 8
3.2 Implementation 9
3.2.1 Crash Sensor 10
3.2.2 ECALL Box 10
3.3 Design Considerations For An IVS 11
3.4 Types Of Sending MDS 12
3.4.1 DTMF Messaging 12
3.4.2 UUS-Messaging 12
3.4.3 USSD-Messaging 12
3.5 Steps Involved In Detection Of Accident 14
3.5.1 Pre-Certification 14
3.5.2 Application Tests 15
3.5.3 Environmental Tests 15
Chapter 4 Benefit And Draw Backs 16
Chapter 5 Conclusion 17
References 18
iv