Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ROUTER-SWITCH.COM 1
Content
Overview ............................................................................................................................................................................... 3
Specification ........................................................................................................................................................................ 8
FAQ ......................................................................................................................................................................................13
Contact Us
ROUTER-SWITCH.COM 2
Overview
Cisco ASR 1000-X is designed for high-end enterprise, data center, service provider edging network in order to handle
explosive traffic through the network. It supports only software redundancy, and it is based on a Quad-core 2.13GHz
processor with 4GB memory, 8GB flash memory, 1 SPA bay, SPA interface processor 10 (SIP10).
Quick Spec
ROUTER-SWITCH.COM 3
Product Code ASR1001-X
Rack-mounting 19-inch
DRAM Memory 4 GB
Flash Memory 8 GB
Product Details
Note:
NIM slots
STATStatus LED
CRIT LEDCritical alarm indicator; MAJ LEDMajor alarm indicator; MIN LEDMinor alarm indicator
ROUTER-SWITCH.COM 4
CONOne RJ-45/RS-232 compatible console port
USB port 1
USB port 0
PWRPower LED
Six built-in 1 GE SFP-only interfaces (do not support SFP+), and two built-in 10 GE SFP+ interfaces (support only 10-
GE rate)
STAT Solid green Cisco IOSD and other required processes have loaded successfully
CRIT Solid Red Functions as a critical alarm indicator. The LED is lso a solid red
(Major)
ROUTER-SWITCH.COM 5
LEDs Color Description
(Minor)
Note
Two power supplies, either two AC power supplies or two DC power supplies are accessed from the rear of the
router and are hot-swappable.
Four internal fans draw cooling air into the chassis and across internal components to maintain an acceptable
operating temperature.
ROUTER-SWITCH.COM 6
The Configuration
The ASR1001-X should be configured with some modules and accessories for normal operation.
ENCRYPTION
Tracking only
ROUTER-SWITCH.COM 7
Specification
ASR1001-X Specification
supply handles, and cable Note: The Cisco ASR 1001-X Router has the
details.
and SIP
cards supported
ROUTER-SWITCH.COM 8
ASR1001-X Specification
Processor
Built-in 10 Gigabit Ethernet port Yes: Two 10 Gigabit Ethernet Small Form-Factor
1-GB speed.
processor
ROUTER-SWITCH.COM 9
ASR1001-X Specification
encryption
release
Wall-mounting No
VAC)
Worldwide ranging DC
Airflow Front-to-back
ROUTER-SWITCH.COM 10
ASR1001-X Specification
(nominal) (0 to 40C)
term) (0 to 50C)
(relative humidity)
(-40 to 70C)
humidity)
Standards (NEBS)
- VCCI Class A
- AS/NSZ Class A
- ICES-003 Class A
ROUTER-SWITCH.COM 11
ASR1001-X Specification
Equipment
(Emissions)
Equipment
(Immunity)
Equipment
- (EMC)
Standard
EN 60950-1
IEC 60950-1
AS/NZS 60950.1
ROUTER-SWITCH.COM 12
FAQ
Q: How do I order ASR 1001-X Router?
A: Please contact us via Live Chat or cisco@router-switch.com.
Q: What new key items are introduced with the ASR 1001-X chassis?
A: The ASR 1001-X Series features two built-in 10-GigabitEthernet (GE) ports. In addition, the ASR 1001-X has a
network interface module (NIM) slot and a shared port adapter (SPA) slot to expand connectivity options.
Q: What system power-supply options are available for the ASR 1001-X?
A: The ASR 1000 Series supports, by default, two power entry modules (PEMs) with either AC receptacle or DC
terminal block for redundancy. The two redundant PEMs load-share the power between them. If an external power
supply fails or one PEM fails or is removed, the other PEM provides the entire power requirements for the chassis.
Q: Can one AC and one DC power supply be used together on the ASR 1000-X?
A: No. The ASR 1000 Series supports dual power supplies by default. However, the rout
Q: Can different Cisco IOS Software releases operate in the same network with the Cisco IOS XE Software releases?
A: Yes, Cisco took special care to preserve the interoperability
Q: What is the main difference between the ASR 1000 Series ESP2.5, ESP5, and ESP20, ESP40, ESP100, and ESP200
processors?
A: All ESPs are based on the Cisco Flow Processor for performing all data-plane forwarding functions, such as MAC
classification, Layers 2 and 3 forwarding, QoS, ACL, VPN, and NetFlow. The ASR 1000 Series ESP2.5 supports 2.5-Gbps
bandwidth (integrated in the ASR 1001-X chassis), and the ESP5 supports 5-Gbps bandwidth. The ESP20 supports 20-
Gbps bandwidth, the ESP40 supports 40-Gbps bandwidth, the ESP100 supports 100-Gbps bandwidth, and the ESP200
supports 200 Gbps bandwidth. The ASR 1000 Series ESP10-N does not support IPsec services. Refer to Table 3 for
more comparisons and specifications. The integrated ESP in the ASR 1001-X chassis supports from 2.5 to 5, 10, 20
Gbps (upgradable through a software license with software activation), whereas the integrated ESP in the ASR 1002-X
chassis supports from 5 to 10, 20, 36 Gbps.
ROUTER-SWITCH.COM 13
Q: What is the expected performance of the ASR 1000 Series?
A: The overall forwarding performance of the ASR 1000 Series depends on the ESP. The overall control-plane
performance of the ASR 1000 Series depends on both the route processor and the ESP.
A: How can I deploy the value-added features on ASR 1000 Series Routers?
First, select a Cisco IOS XE Software consolidated package that supports the required features. Second, check whether
this feature requires a software license. If it does, you must purchase the required license in addition to the Cisco IOS
XE consolidated package. The consolidated package and license are linked to the chassis, so if you upgrade from one
route processor to another or from one ESP to another, you do not need to purchase a new consolidated package or
feature license.
ROUTER-SWITCH.COM 14