Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DT22028
TECHNICAL SPECIFICATION Pag. 1/2
Rev. 2
65000 L Data 02.08.2011
Date
General technical specification for installation Prep. (UTD) T. Ceccardi
NOTES
(*1) [EN12999-Annex M] M = (P R )
(*2) [EN12999-Annex M] Mdyn = (2 P R + 1 Gb Xg)
(*3) Excluding the noise from the pump of power unit.
(*4) With the exception for induced vibrations. (*5) Weights 5%. (*6) Version available on request.
(*7) Controlbank and winch kits not included. (*8) The use of spacers is dependant on the deck seating plate height.
The figures for liftable loads and outreaches may be found in the load diagrams. The outreaches indicated in the diagrams are
theoretical and do not consider boom flexing ( 2% horizontally).
Technical modifications may change the stated data.
N. DT22028
TECHNICAL SPECIFICATION Pag. 2/2
Rev. 2
65000 L
General technical specification for installation
OPTIONAL / ACCESSORIES
EXTENSION VERSION 1S (*1) 2S 3S 4S 5S
Basic crane hook
Max SWL t 22
Weight kg 33
Securing pin diameter mm 53
EQUIPMENT
EXTENSION VERSION 1S (*1) 2S 3S 4S 5S
Basic crane extensions
First manual extension: weight kg 180
Second manual extension: weight kg 120
Third manual extension: weight kg
Diameter of extension securing pin mm 28
Hook: max SWL t 22
Hook: weight kg 33
Hook: securing pin diameter mm 53
DIN 15018 (EN 12999) classification H1-B3 (lifting by hook)
Winch
Winch kit (weight increase) kg
NOTES
(*1) Version available on request.
Weights 5%.
The figures for liftable loads and outreaches may be found in the loading diagrams. The outreaches indicated in the diagrams are
theoretical and do not consider boom flexing ( 2% horizontally).
Technical modifications may change the stated data.
N. DT22040
TECHNICAL DATA Pag. 1/1
Rev. 0
65000 L ( = 9) Data 02.10.2007
Date
Weights and Centres of Gravity Prep. (UTD) T. Ceccardi
Standard version
Optional version
Xg Yg
Zg
R
Xb
Gb
Re
Xbe
Gb
Gf
Gf Mass of crane base unit, plus the column and the lift
cylinder (1st Boom cylinder)
Gb Mass of the boom system
Xb Distance between the CoG of Gb and the crane axis
Xbe of rotation
N. DT22037
TECHNICAL DATA Pag. 1/1
Rev. 0
65000 L Data 02.10.2007
Date
Installation data Prep. (UTD) T. Ceccardi
Dead spot
USE OF SPACERS
Punch to avoid
Spacer accidental loosening
MIN- 35
MAX- 60
N 1 Spacer
1140 N 8 10 x 10
300 Welded to the
supporting base
300
1140
=
=
=
R5
89.
4
Controlbank
min D. 1"
Filter
OUT
Slewing 1st Boom 2nd Boom Extensions Winch Drain Drain Winch LML
Fittings: Fit. Hose Fit. Hose Fit. Hose Fit. Hose Fit. Hose Fit. Hose Fit. Hose Fit. Hose
UNF JIC37
Max distance
6m
Female
o rks
w
p ipe ied
r l
e s o supp
s
Ho not
Use quality high pressure hoses: min 320 bar