Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Features
Endurance: 2000 h to 5000 h at 105 C
Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
Vibration-proof product is available upon request. (08 mm and larger)
AEC-Q200 qualied
RoHS directive compliant
Specifications
Category Temp. Range 55 C to +105 C
Rated W.V.Range 6.3 V.DC to 100 V.DC
Nominal Cap.Range 3.3 F to 6800 F
Capacitance Tolerance 20 % (120 Hz/+20 C)
DC Leakage Current I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater)
tan d Please see the attached standard products list
W.V. (V) 6.3 10 16 25 35 50 63 80 100
Characteristics Z(25 C)/Z(+20 C) 2 2 2 2 2 2 2 2 2
(Impedance ratio at 120 Hz)
at Low Temperature Z(40 C)/Z(+20 C) 3 3 3 3 3 3 3 3 3
Z(55 C)/Z(+20 C) 4 4 4 3 3 3 3 3 3
After applying rated working voltage for 2000 hours at +105 C2 C and then being stabilized at +20 C,
Capacitors shall meet the following limits. ( > 012.5 and sufx G in 0810.2, 01010.2 are 5000 hours)
Endurance Capacitance change 30 % of initial measured value (Sufx G is 35 %)
tan d < 200 % of initial specied value (Sufx G is 300 %)
DC leakage current < initial specied value
After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized
Shelf Life
at +20 C, capacitors shall meet the limits specied in Endurance (With voltage treatment)
After reow soldering and then being stabilized at +20 C, capacitors shall meet the following limits.
Resistance to Capacitance change 10 % of initial measured value
Soldering Heat tan d < initial specied value
DC leakage current < initial specied value
< 010
Capacitance (F)
Negative polarity
0D0.5
B0.2
L W
Lot number Rated Voltage Mark
Pressure Relief (010 and larger) ( ) Reference size
> 012.5
Capacitance (F)
Negative polarity Size
marking () Series identication code
D L A,B H I W P K
K ', B 4.0 5.80.3 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 +- 1.5
0.2
C 5.0 5.80.3 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 +- 1.5
0.2
D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 +- 1.5
0.2
Lot number Rated Voltage Mark
D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 +- 1.5
0.2
Rated Voltage Mark E 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 +- 1.5
0.2
j 6.3 V H 50 V F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2
A 10 V J 63 V G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2
C 16 V K 80 V H13 12.5 13.50.5 13.5 15.0 max. 4.7 0.900.3 4.4 0.700.3
E 25 V 2A 100 V J16 16.0 16.50.5 17.0 19.0 max. 5.5 1.200.3 6.7 0.700.3
V 35 V K16 18.0 16.50.5 19.0 21.0 max. 6.7 1.200.3 6.7 0.700.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014
EEE-41
Aluminum Electrolytic Capacitors/ FK
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014
EEE-42
Aluminum Electrolytic Capacitors/ FK
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014
EEE-43
Aluminum Electrolytic Capacitors/ FK
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014
EEE-44