Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com/pcb-design-specifications/
(index.html)
My Account (https://www.my4pcb.com/Net35/Login.aspx) |
Register (https://www.my4pcb.com/Net35/newcustomerform.aspx#_ga=1.136243313.1140788869.1438815030)
1.800.979.4722 (tel:+18009794722) Click to Talk (click_to_talk.php) |
PCB Tolerances
Capabilities
Advanced Circuits provides you below with the required in-house tolerance guidelines to ensure quality
manufacturing of your printed circuit boards. Adhering to these tolerances will allow for proper connection center ()
manufacturing of your PCBs. Within these parameters, there is enough variation to allow us to manufacture
Get Instant Quote
the board and then also for it to work properly in your application. If you have any questions or want to
(instant_quote/index.html)
discuss unique requirements, please call 1-800-979-4722 to contact us (http://www.4pcb.com/contact-
Place PCB & Assembly Order
us.php).
(pcb-order-options.html)
Capabilities
Inner Layer Clearances (pcb-capabilities.html)
We require a minimum of 0.010" inner layer clearance. FREE PCB Layout Software
(free-pcb-layout-software/)
Copper to Edge of Printed Circuit Board FREE PCB File Check (free-
pcb-file-check/index.html)
Minimum of 0.010" (outer layers) and 0.015" for inner layers (0.020" preferred for inner layers). For scoring, Student Program
minimum of .015 for outer layers and .020 for inner layers. (pcb-student-discount.html)
Download Brochure
Pad size should be at least + 0.010" over finished hole size for vias and + 0.014" over finished hole size for (AC-brochure-Sept2013-
component holes. This means the annular ring (radius of the pad) should be at least .005" for vias and a Web.swf)
minimum of 0.007" for component holes.
DOWNLOAD BROCHURE
(/AC-BROCHURE-
Hole Size SEPT2013-WEB.SWF)
+/- 0.005" Standard Spec (applies to holes up to .250", larger holes will be routed, see Rout tolerances
below)
+/- 0.005" Custom Spec
+/- 0.003" Custom Spec upon request 1 oz and 2 oz finished copper weight and 3 oz finished copper weight
(when starting with 2 oz foil) only.
If your hole tolerances are zero (see below), then Advanced Circuits will assume that you are OK with our
default hole tolerance. Our default hole tolerance is listed above.
Our minimum finished hole size; 0.004". Call your salesperson if you required a finishedhole size less than
0.004".
1 of 2 10/01/2017 03:32 PM
Printed Circuit Board Design Tolerances | Advanced Circuits http://www.4pcb.com/pcb-design-specifications/
The Outer Layer Tolerances on Standard Spec defined boards is +/- 0.010"
(+/- 0.005" available for Custom Spec upon request)
Note: We rout to your board size using the center of the board outline on your mask layer.
Copper spacing is the minimum air gap between any two adjacent copper features. Trace width is the
minimum width of a copper feature, usually traces.
For 1 oz. finished copper weight (inner layers), the minimum trace width/space is 0.005"
For 2 oz. finished copper weight (inner & outer), the minimum trace width/space is 0.006"
For 3 oz. finished copper weight (inner & outer), the minimum trace width/space is 0.010"
For 4 oz. finished copper weight (inner & outer), the minimum trace width/space is 0.012"
Note: Advanced Circuits does not offer weights such as 1.5 or 2.5 ounce finished on standard and custom
spec orders.
Soldermask Swell
This is the expansion of mask relief over pad area. Our minimum is 0.005" over pad dimension or 0.0025"
each side. Advanced Circuits will modify files to meet the minimum dimension.
Slot Width
Minimum 0.031" in width. For smaller width, call your salesperson for pricing and turntime.
Please allow 0.100" spacing between your individual pcbs for tab rout spacing. When scoring there should
be no spacing between boards.
Silkscreen (Legend)
MIL-PRF-55110 (http://www.4pcb.com/pcb-certifications.html) |
2 of 2 10/01/2017 03:32 PM