Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
QUOTATION
The Buyer MR.MAYUR
Ref. Number SUBA20170913-600
Date 2017-09-13
Valid period: This quotation is valid within 30 days from the date of quotation.
Considering the recent wider fluctuation of exchange rate of U.S. Dollars, The above price is only a reference, the final price depends on the agreement that both parties
reach.
Payment term: After the contract is signed, the buyer pay 30% of the total value as the down payment to validate the contract; and pay the remaining 70% of the total value before
delivery of the machine.
Note: 1.The seller reserves the right of modifying this quotation while exceed the valid period of this quotation.
2.The above delivery time is only for reference, because it is given based on the sellers production plan on the date of quotation. The specific delivery time should subject to the
relevant agreement in the contract signed by both parties; the actual delivery time may be longer or shorter than the above one.
SL-600
SL-600 double wall corrugated pipe production line
2
SL-600
SL-600 double wall corrugated pipe production line technical manual
PART
ODPipe
115 172 195 228 285 337 443 555 690
Sizemm
IDPipe
100 150 170 200 250 300 400 500 600
Sizemm
SN8
0.85 1.5 1.9 2.1 3.5 5.4 8.0 13 19
Weight/meterkg/m
SN4
0.7 1.2 1.6 1.8 3.0 4.6 5.8 9.0 15
Weight/meterkg/m
Speedm/min 5-6 4.2-5 3.8-4.5 3.5-4.2 2.8-3.5 2-2.8 1.8-2.5 0.9-1.3 0.8-1.0
Remark :
The cooling water should be 15 when it was used for corrugators mold and calibration sleeves, the difference between entrance and exit of the cooling water
should not less than 0.2~0.3Mpa.
15 0.2-0.3MPa
All of the raw materials should be satisfied with the technological requirements of HDPE double wall corrugated pipe.
PE
All of the parameters mentioned above are recorded based on the sellers materials, it will be different when it was tested in buyers plant because of the materials and
cooling water temperature difference, etc.
Application drainage
Product Color
Designed by the buyers opinion
Circumstance condition
Working place Indoor
No dangerous area
Power source
85% no condensation
Humidity
85%
Use Condition
3 phase 415V 50HZ
Voltage and frequency
3 415V -10%+5%
Installation capacity
Approx.380Kw
Usual capacity 230Kw
Consumption of cooling water 0.5m3/min12, 0.2~0.3Mpa
Requirement of compressed air 0.3m3/min , >0.5Mpa
Main Technology Parameters
Length 27m5.5m3.8m
PART
Equipment List
No. Item Name Qty
1 SJ9036 Single Screw Extruder (for the outer wall extrusion) 1 Set
SJ9036
2 SJ7536 Single Screw Extruder (for the inner wall extrusion) 1 Set
SJ7536
3 BW-600 high-speed water cooling corrugator 1 Set
BW-600
4 LQ-600 cooling water tank 1 Set
LQ-600
5 C-600 automatic dustless cutting machine 1 Set
C-600
6 Unloading device for plastic pipes 1 Set
Die head and mould blocks 9 Sets
7
(100, 150,170,200,250,300,400,500,600mm)
8 Electronic Control System 1 Set
PART
/Technical Term
1. SJ-90/36 single screw extruder
SJ-90/36
1.1 Screw
diameter: 90 mm
L/D: 36:1
Rotary speed: 9~90r/min
Material: 38CrMoAlA nitrogen hardening and honing treatment; thickness of the hardening layer is0.3- 0.6mm; enough strength, wear
and corrosion resistance.
Hardness: HV740
1.2 Barrel
Material: 38CrMoAlA Inside surface treatment: nitrogen hardening and honing treatment; thickness of the hardening layer is0.4-
0.7mm;
Hardness: HV940
Heating zone: 6 zones
Heating style: efficient ceramics heating
Heating power: 5.2Kw6
Cooling style: fan cooling
Inverter: AB
Power: 132Kw
1.6 plasticizing capacity: Max.600Kg/h
1.7 Dimension 4290X1750X1410mm
1.8 Weight 4500Kg
2. SJ-75/36 single screw extruder
SJ-75/36
2.1 Screw
diameter: 75 mm
L/D: 36:1
Rotary speed: 12~120r/min
Material: 38CrMoAlA nitrogen hardening and honing treatment; thickness of the hardening layer is0.3- 0.6mm; enough strength, wear
and corrosion resistance.
Hardness: HV740
2.2 Barrel
Material: 38CrMoAlA Inside surface treatment: nitrogen hardening and honing treatment; thickness of the hardening layer is0.4-
0.7mm;
Hardness: HV940
Heating zone: 5 zones
Heating style: efficient ceramics heating
Heating power: 5.0Kw5
Cooling style: fan cooling
Fan power: 50.55 Kw
2.3 Gear box
Material: QT200
Gear meshing type of wheels:hard teeth surface meshed with oblique Teeth surface
Gear material: 20CrMnTi
10
Heat treatment Carbonized Gear
Axis material: 40Cr
Cooling mode: water coolingequipped with cooling device for circular cooling inside
2.4 Material falling base
structure feature: inner hole opentrunk sleeve and spiral water
material: Q235
2.5 Main motor
Type: AC motor
Inverter: AB
Power: 75Kw
2.6 Plasticizing capacity: Max.400Kg/h
2.7 Dimension 3572X1600X1420mm
11
12
x-y-z
Corrugator adopt the guide roller and guide groove molding composite structure, having a high guide precision, the ability to adapt to the environment, ease
of maintenance
The corrugator has a function of withdrawing in case of emergency.
It adopts international top brand PLC control system and modularizing control solution so as to have extremely high compatibility and high control precision
with high reliability
PLC
Main Technical Parameters
Center height 1110mm 15mm
Pipe range ID100-ID600mm
Corrugation speed 0.6~6.2m/min
Quantity of blocks 36 pairs
Corrugators motor 7.5Kw
Vacuum motor 45Kw
Left and right frames open and close distance Right (0~490mm), Left (0~490mm)
13
Dimension 594539101970mm
(Not include the vacuum pump and electrical cabinet )
Weight 12000Kg
Corrugators cooling Confined, forced circulation water cooling
4. LQ-600 cooling water tank
LQ-600
The spray cooling bath side-opened on both sides makes the operation and maintenance easier
Stainless steel tank
Shower cooling system
Main Technical Parameters
Cooling length 3680mm
water removal length 1200mm
Water cooling Shower + Spray
+
Dimension 562020501860mm
14
Weight 4500Kg
5. C-600 automatic dustless cutting machine
C-600
Cutting method dustless
Pressing method Pneumatic pressing
Shaving collecting unit yes
PLC control system
Main technical parameters
Cutting range ID100-ID600mm
Rotation cutting speed max.50 r/min
Hydraulic station quantity 2
Cutting-off way Double blade cutting, separate control
Dimension 335019101950mm
15
Weight 3500Kg
6. Unloading device for plastic pipes
Pipe range ID100-ID600mm
Effective length 6000mm
Dimension 65002500900mm
Weight 1500Kg
7. Die head and mould blocks (Including belling mould block)
(100 ,150,170,200,250,300,400,500,600mm)
Method Spiral
Material 40Cr, 38CrMoAlA
Heating Power 70Kw
Mould block AL
Quantity of blocks 36pairs
16
Assisiting Equipment
1. Automatic vacuum feeder
Feeder mode: auto vacuum feeder
Loader capacity: 750Kg/h
Motor power: 4.0Kw
17
Dryer Hopper
Fan power: 0.37Kw
Heating power: 6.0Kw
Valume: 200L
2. Automatic vacuum feeder
Feeder mode: auto vacuum feeder
Loader capacity: 500Kg/h
Motor power: 2.0Kw
Dryer Hopper
Fan power: 0.25Kw
Heating power: 2.0Kw
18
Valume: 100L
Spare parts
1.
Screw tool sets
2.
die mould tool set
3.
Extruder Thermocouple units
4.
Wire for mould m
5.
Vacuum Meter unit
6.
Cutter blade unit
19
4. Quality guarantee
The guarantee period is 12 months from the date of putting the equipment installed, but not more than 15 months from the date of delivery. After the end of the
Guarantee period the Supplier is obliged to provide with lifelong service at the expense of Buyer.
12 15
During a warranty period of exploitation the Seller undertakes to execute warranty service of the equipment, troubleshooting and replacement of out of service
spares, except for breakings, bound with incorrect exploitation of the equipment by the Buyer.
5. Service
Seller provide the technical service with free, and training the workers of buyers.
6. Installation and testing
The seller can send enough technicians to the buyers company for installation and testing the lines. The round trip ticket, accommodation, transportation,
medicine treatment and insurance caused by the buyers expert in Russia will be covered by the buyer. The buyer need pay for the salary during the installation and
testing period.(300RMB/day)
300RMB/
SELLER: : BUYER : :
_______________Signature _______________ Signature
20