Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
You can access the Reference Point tool by opening a 8 bit file (Disc Options / Open 8 bit
File).
Procedures
To position Reference points
1/ Open a 8 bit file (.ic1 or .img) (Disc Options / Open 8 bit File).
4/ If a conversion is necessary, select (8 left button) in the Grid in and Grid out fields the
initial and final reference grid among those listed and validate via the OK button.
If no conversion is necessary, close the box via the Cancel button.
5/ The pointer takes the icon form :
6/ Click precisely over the first reference point.
7/ Indicate the co-ordinates of that point in the following dialogue box :
3/ Ignore this box which is not useful for this operation by clicking over the Cancel button.
5/ Ignore this box which is not useful for this operation by clicking over the Cancel button.
6/ Click over the second point (b).
Ignore again the dialogue box which opens by clicking over the Cancel button.
7/ Select the tool by clicking (8 left button) directly over its icon.
A window invites you to indicate the side to remove (Up, Left, Right, Down) :