Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Technical Data sheet for Valve, Gate 18 & 12 A 216-WCB FLG: ANSI #600 RTJ, H-Wheel
, API 600 are as follow:
VALVE ID : N/R
Flanged gate valve, Flexible wedge disc, Bolted bonnet, OS & Y, Rising stem with
back seating and Seal welded renewable seat ring, Ring type joint flanges to ASME
1. VALVE : B16.5, Hand wheel operated completed with Gear Box, fitted with stem protector
and position indicator.
1.1 Body : Cast Carbon Steel to ASTM A-216 Gr. WCB
1.2 Seat Ring : Forged Carbon Steel to ASTM A-105 hard faced with Stellite 6
1.3 Disc : Cast Carbon Steel to ASTM A-216 Gr. WCB hard faced with Stellite 6
1.7 Body to Bonnet Gasket : SS-316L Spiral Wound Gasket with graphite fiber filler annealed to 160 BHN maximum
1.13 Stem Nut : ASTM A-439 Gr. D2C with protective coating for sour environment
2. Gear Box
2.6 Bolts and Nuts : ASTM A-193 Gr. B7 and A-194 Gr. 2H respectively with protective coating for sour
environment
All Internal parts of ger box shall be of high quality alloy suitable for heavy duty
2.7 Other
service. Bronce and other cooper bearing alloys are not acceptable.
3. HANDWHEEL
3.4 Construction : Spoke and rim design with no more than 6 spokes
1|Page
4. STEM PROTECTOR : Yes, ASTM A-53 gr.B pipe or ASTM A-36 cap.
6. REPLACEABLE POSITION INDICATOR ASTM A-105 with SS 316 scraper and double sealof Buna N Rubber and spring
:
SEAL reinforced.
9. OTHER DETAILS : - Differential Hardness on seats: 50 HBR. The harder surface shall be on fixed seat.
10.8 Name Plate : All valves shall include 316 SS Nameplate showing detail information.
Inspection shall comply with API 600 and a high pressure closure test completed on
10.9 :
each valve.
10.10 Painting System : Yesy, Resistance to high temperature over than 400 oC
10.11 Lubrication at Stem : Yes, Resistance to high temperature over than 400 oC
10.12 DPT (Dye Penetrant Test) on Hard
Facing overlay (metal to metal contact : Yes
surface both disc & seat ring)
10.13 DPT (Dye Penetrant Test) on
welding joint between seat ring and : Yes
body
10.14 Welding Procedure Specification,
Copy of Welding Procedure Specification, Welder certificate, welding
welder certificate, welding :
consummable certificate shall be submitted together with final test report.
consummable certificate
NOTE:
Detailed Drawings of the Valve and Operator, Indicating the Parts and Material
1. :
Specifications shall be submitted together with this Bid.
2. : In case of modification, use additional sheet if necessary.
2|Page