Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Construction
Surface material top face Polyamide fabric
Surface pattern Fabric texture
Colour Black
Surface material underside Chrome leather
Surface pattern Leather texture
Colour Grey
Tension member material Polyamide sheet, highly-orientated
Technical data
Total thickness 7.20 mm 0.50
Weight 7.10 kg/m
Fw at 1 % elongation at fitting 80 N/mm
Relaxed specific shaft load at 1 % elongation at fitting and 180 arc of contact in
N/mm belt width.
k1% value relaxed 40 N/mm
Elongation at break longitudinal 14 %
Nominal effective pull (Fu',Nenn) 80 N/mm
Elongation at fitting min. 1.5 %
Elongation at fitting max. 3%
Friction coefficient of top face against 0.3
steel panel according to internal test
instruction
Friction coefficient of underside 0.4
against steel panel according to
internal test instruction
Permissible operating temperature -40/+80 C, for a short time +100 C
Properties
Troughable No
Cut resistant Yes
Not susceptible to shocks Yes
High edge stability Yes
The physical data in this data sheet is approximate, can alter depending on production environments and was established at standard ambient
conditions (23C/73F, 50% relative humidity) in accordance with DIN 50014/ISO 554. Fluctuations in climate can cause variations. See our
brochure Technical Information 1 no. 317 which shows the types of belts that can be supplied and the manufacturing tolerances. Customised
types require written confirmation. Siegling - total belting solutions
8/24/2017
1
Product Data LT 80P
Sheet Food properties
Not suitable for the transport of unpacked
food according (EU) 10/2011 and (EC)
1935/2004, FDA 21CFR or MHLW 370.
Electrostatic properties
Antistatic Belt material with electrically conductive
components inside of the belt or at the
surface. Conductivity of the belt in
longitudinal direction R(Di) < 3*10^8 .
Fabrication
Belt edge sealing No
Profiles on top face On request
Profiles on underside No
Applications
Energy Production Generator power transmission belt
Press shops Car body presses
Steel / Recyling Power transmission belt for rolling mills
Wood Based Panel Industry Gang saw power transmission belt;
Power transmission belt for crawler-
crushers
Remarks
Storage at standard climatic conditions (23C / 50% humidity) recommended.
Changes in dimensions possible when conditions do not apply.
LL and LT articles are impervious to machine oils, grease, diesel fuels, petrol,
benzene, commercially available solvents such as ethyl acetate, acetone, etc.;
chlorinated hydrocarbons such as perchloroethylene, etc. Siegling Extremultus
is not resistant to organic and inorganic acids.
Chemical resistance A
The physical data in this data sheet is approximate, can alter depending on production environments and was established at standard ambient
conditions (23C/73F, 50% relative humidity) in accordance with DIN 50014/ISO 554. Fluctuations in climate can cause variations. See our
brochure Technical Information 1 no. 317 which shows the types of belts that can be supplied and the manufacturing tolerances. Customised
types require written confirmation. Siegling - total belting solutions
8/24/2017