0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
28 visualizzazioni1 pagina
This document provides process data and component specifications for a zinc concentrate pipeline including:
- Flow rates of 92-104 m3/hr and service conditions of 165 kPa inlet pressure and 5-17°C inlet temperature.
- A 6" diameter pipe with 40mm wall thickness made of ASTM A53-B 150# RF material.
- A knife gate valve with a 150 DN ANSI body of A216 WCB material, PTFE gasket, and 6" port diameter.
- A double acting pneumatic actuator with 551.6 kPa air pressure that is normally closed.
- Solenoids that are 4/2 ways with spring return, made of anodized aluminum
This document provides process data and component specifications for a zinc concentrate pipeline including:
- Flow rates of 92-104 m3/hr and service conditions of 165 kPa inlet pressure and 5-17°C inlet temperature.
- A 6" diameter pipe with 40mm wall thickness made of ASTM A53-B 150# RF material.
- A knife gate valve with a 150 DN ANSI body of A216 WCB material, PTFE gasket, and 6" port diameter.
- A double acting pneumatic actuator with 551.6 kPa air pressure that is normally closed.
- Solenoids that are 4/2 ways with spring return, made of anodized aluminum
This document provides process data and component specifications for a zinc concentrate pipeline including:
- Flow rates of 92-104 m3/hr and service conditions of 165 kPa inlet pressure and 5-17°C inlet temperature.
- A 6" diameter pipe with 40mm wall thickness made of ASTM A53-B 150# RF material.
- A knife gate valve with a 150 DN ANSI body of A216 WCB material, PTFE gasket, and 6" port diameter.
- A double acting pneumatic actuator with 551.6 kPa air pressure that is normally closed.
- Solenoids that are 4/2 ways with spring return, made of anodized aluminum