Sei sulla pagina 1di 1

Design & Construction Summary

Common CorroTile specification for iron ore applications







<1mm gap between
Optional hardened reinforcing edge <1mm
tiles joints staggered in
bar welded to backing plate tiles joi
direction or ore flow
directio

P90 or Next
Gen Blue Tiles

6mm steel
backing plate

Studs or fasteners as requested


One piece ceramic chamfered edges


6mm high tensile (3800psi) rubber


Typical Liner Cross sections

CorroTile Design

P90 Ceramic or Next Generation Blue Ceramic 25mm to 100mm thick


3800psi tensile strength rubber compound 6mm to 300mm thick
3800psi bond strength between ceramic and rubber

Tiles staggered in direction of ore flow


Pre-engineered tiles
Multiple sizes, shapes and profiles can be manufactured
Fastening options include, studs, internal nuts, magnets, rail mounts or
custom fitting
Hardened edge bar welded to backing plate for structural reinforcement
Approximately 200 kg per square metre for 63mm thick liner
Engineered to suit each application, including liner design, liner layouts and
CorroTile liners installed in a reclaimer chute
liner details

For further information contact your nearest distributor:

Australia (TOLL FREE)

1800 352 228


International +61 2 8853 3000
See our full range of products today www.imatech.com.au

Corrotile_3.indd 1 3/09/13 3:46 PM

Potrebbero piacerti anche