Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4
, Jakarta
IMPORTED TILE
8
Tiles per sq.m.: 10pcs.
CLASSIC GLAZE (Only available in Romane Canal TBF)
TERREAL
Bird Stop
A1
Ventilation Socket
Glass Tile A7
Ridge / Sleeve Double Roll
Hip End Clear Tiles Romane TBF
(2.7 pcs/m)
TERREAL Dry Flash TM
TERREAL CoolMax TM A7RC
(Abutment solution) (Reective insulation) Double Roll
Romane
Canal TBF
(2.7 pcs/m)
A11 A10
Round Round Hip Tile A13
Hip End 2.5 pcs/m.run 4 Way Apex
CooLMax Premium Super CPS5 CooLMax Premium Multi CPM5 CooLMax Premium Advance CPA9
CooLMax Premium CP3
Two external pure (99.4%) Two external pure (99.4%) Two external pure (99.4%)
Two external pure (99.4%)
aluminium foil layers covering aluminium foil layers covering aluminium foil layers + 5 layers of high
aluminium foil layers covering
a single core layer of polyethylene a double layer of polyethylene reflective foils covering 2 core layering
a single core layer of polyethylene
bubble film bubble film and a single layer of of polyethylene bubbles and 4 layers
bubble film
Roll size : 1.2 m (W) x 30m (L) foam of polyester wools
Roll size : 1.2 m (W) x 60m (L)
x 8mm (T) Roll size : 1.2 m (W) x 30m (L) Roll size : 1.2 m (W) x 20m (L)
x 3.8mm (T)
Coverage: 72m2 Coverage: 36m2 x 9mm (T) x 48mm (T)
Coverage: 36m2 Coverage: 24m2
CooLMax Foil CF2 CooLMax M-Foil One CMF1 CooLMax M-Foil CMF2
CooLMax Foil One CF1
Five layers laminate made up of a Three layers reflective insulation made Five layers reflective insulation made
Three layers laminate made up of a
double sided reflective material up of single sided high reflective up of double sided high reflective
single sided reflective aluminium
(aluminium and metalized) bonded metalized polyester bonded to HDPE metalized polyester bonded to
bonded to reinforce high density
to reinforce high density polythylene woven fabric by layers of special HDPE woven fabric by layers of
polyethylene woven fabric with
woven fabric with special bonding bonding material. special bonding material.
special bonding material.
material. Roll size : 1.22 m (W) x 50m (L) Roll size : 1.22 m (W) x 50m (L)
Roll size : 1.25 m (W) x 48m (L)
Roll size : 1.25 m (W) x 48m (L) Coverage: 61m2 Coverage: 61m2
Coverage: 60m2
Coverage: 60m2
Safety Environmentally
Safe where there is no Friendly
electricy mishaps or Whereas Solar energy is
gas leak. clean and pollution free.
Backup Booster
SolarMax has incorporated SolarMax is build to last
a back-up electric booster and corrosion resistant.
for raining days or during Water is the only moving
the festive season when
you need more hot water part. Thus, minimal
than usual. maintenance is required.
GENERAL
Terreal Dry Flash is a perfect solution for abutment, providing
better and neat finishing. Terreal Dry Flash is an aluminium
product with high degree of flexibility thanks to continuous
corrugation and multiple pre-fabricated bending lines
Step 1
Cut the Dry Flash [Wall
Width + 4cm] Bend it at
the pre-determined Step 2 Step 3 Step 4 Step 5
bending line and press Bend the 2 parts on Remove the protective Install Terreal Flash Strip The upper seam must be
it against the wall. both sides away from foil from the lower over the top adge of sealed with sealing
Bending line should be the wall. Remove the adhesive strip and form Dry Flash and fasten the compound.
at the contact line of protective foil from the it on the tiles. Strip with rust resistant
the roof with the wall. upper adhesive strip screw or nail.
and fix the Dry Flash
horizontal on the wall.