The Stakeholders in this project include any consumers that
use television as well as any consumer that uses their smartphone as a media device. Research Results
During my research I have found that with the onset of
mobile phones since 2012 consumers now spend 2 hours and 57 minutes on their phones.
This figure is higher than the 2 hours and 48 minutes people
spend on average watching t.v. POV Statement
User: Consumers that enjoy watching television on a
consistent basis and use it now.
Need: To be flexible and t.v wherever you want regardless
of size.
Insight: Consumers are already watching less t.v than in
previous years due to mobile phones. Problem Statement
Allow cable television to be more mobile for users.
Criteria/Requirements
Criteria- lightweight, clear picture, universal, works with
existing peripherals, cost eective
Requirements- The design shall not be longer than 8
inches. The design shall have at least 1920x1080 pixels. The design shall have peripherals for existing additions. The design shall work with existing service providers. The design shall not be above $500 USD. Design Alternatives
The design to the right could be an alternative to my
current design however it didnt meet a few of my criteria especially in regards to size. I wanted my design to be small and this design goes about the requirements I specified. Design Alternatives Cont
This design would have been my next choice for my final
design however it failed to meet one of my criteria in regards to peripherals. Even though I had size weighed higher than peripherals there were a few other things that this design was lacking including resolution. Decision Matrix Chart Criteria Weight Design A Design B Design C Size of the unit 0.5 5 5 1 Picture resolution 0.2 5 5 5 Number of features 0.1 4 1 3 Cost 0.1 4 1 2 Aesthetics of unit 0.1 4 3 3
Total 1 4.7 4 2.3
My decision matrix shows my 3 designs A, B, and C. I added a weight to my criteria which I identified as most important (size, resolution, features, cost aesthetics). I then multiplied the scores I gave my design by the weight of the criteria to get the scores. Design A had met the most of my criteria. CAD Rendering Design Function
The CAD is intended to be used as a portable television
with hdmi and usb peripherals.
The customer will be able to watch live tv from using their
service providers credentials and a hologram will appear from the device. What does the design solve?
This design solves the problem with being able to watch
cable tv without having to be in your home.
Many times if you want to watch a sporting invite or an
important event youre confined to your living room because you don't have a device with the size and capabilities of your television. What does the design solve cont The material this device will made out of is injection molded ABS the design is quite simple and 3D printing may be used for early prototyping.
We expect to source the electronics from a vendor and
injection mold and assemble the rest of the parts in house with a price point of $45 USD per unit and we will sell the device for $99 USD.
We expect the customer to love this product. Now they can
take the same comfort of their living room on the go with this device that allows them to watch television on the go. Learnings
During this project I learned a great deal about how
product go from ideation to visual a prototype. It all starts with the customer and what they require from the product what it must do to solve their needs while also being cost eective.