Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Wireless Speaker
.
Owners Manual
HEOS 7
HEOS 5
HEOS 3
.
1
Contents Setup Use Troubleshooting Status LED Appendix
2
Contents Setup Use Troubleshooting Status LED Appendix
3
Contents Setup Use Troubleshooting Status LED Appendix
Thank you for purchasing this HEOS product. To ensure proper operation, please read this owners manual carefully before using the product.
NOTE
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
For latest information, please visit HEOSbyDenon.com
INTRODUCTION
The HEOS speaker is part of the HEOS wireless multi-room sound system that enables you to enjoy your favorite music anywhere and everywhere
around your home. By utilizing your existing home network and the HEOS app on your iOS or Android device, you can explore, browse, and play music
from your own music library or from many online streaming music services.
0 True multi-room audio - play different songs in different rooms or the same song in every room
0 Utilizes your existing home wireless network for quick and easy setup
0 Industry leading microsecond audio synchronization between HEOS device
0 Legendary Denon audio quality
If you are in a hurry, you can be enjoying great sounding music in no time by following the steps outlined in the HEOS Quick Start Guide (packaged with
your HEOS device).
[Example] HEOS 5
4
Contents Setup Use Troubleshooting Status LED Appendix
NOTE
If you have already installed at least one HEOS speaker, please skip to the section ADDING MORE HEOS SPEAKERS below (v p. 14).
System Requirements
Before you begin installing your first HEOS speaker, please make sure you understand and meet a few basic requirements.
o Network Requirements
Wireless Router - In order to use your HEOS music system, you should have a working wireless (Wi-Fi) network in your home. If you do not have a
wireless network, please contact your local Denon dealer or electronics retailer to assist you with purchasing and installing a wireless network in your
home.
The HEOS Extend Wireless Range Extender (sold separately) is available as an accessory, should
you need to setup a new wireless network or extend the range of your existing network. Please
contact Denon for more information about the Wireless Extender.
.
High Speed Internet Connection - HEOS accesses the Internet to stream music to your home from many popular online music services. HEOS is
also designed to provide you with software updates, which are delivered via your home Internet connection. DSL, Cable, and Fiber services will
provide the best experience and reliability. You may experience performance issues with slower Internet connections like satellite based services.
5
Contents Setup Use Troubleshooting Status LED Appendix
o Controller Requirements
You can control your HEOS wireless multi-room sound system using the free HEOS app on any iOS or Android mobile device that meets these
minimum requirements:
.
.
iOS Minimum Requirements Android Minimum Requirements
0 iOS version 5.0 or later 0 Android OS version 2.3 or later
0 iPhone 3GS or newer 0 All resolutions
0 iPad
0 iPod touch (3rd generation) or newer
6
Contents Setup Use Troubleshooting Status LED Appendix
q HEOS Speaker
HEOS 7 HEOS 5 HEOS 3
or or
w Quick Start Guide e Safety Information r Warranty t Extended Protection Plan y Audio/Setup cable
Sheets (North America model only) (North America model only)
7
Contents Setup Use Troubleshooting Status LED Appendix
o Front panel
HEOS 7 HEOS 5 HEOS 3
q q
q
w
w w
.
A Speakers
B Status LED
Please refer to the Status LED Table for LED color and state meaning Status LED Table (v p. 45).
8
Contents Setup Use Troubleshooting Status LED Appendix
o Controls
HEOS 7 HEOS 5 HEOS 3
q w
w q q
e w
.
A Volume Up/Down buttons (+, )
Adjusts the HEOS devices volume level up or down.
B Mute button (:)
Mutes or unmutes the HEOS devices volume.
C Headphone output (HEOS 7 only)
The music will stop playing through the built in speakers when you insert the headphones and turn back on when you remove the headphones.
See (v p. 22).
9
Contents Setup Use Troubleshooting Status LED Appendix
o Back panel
HEOS 7 HEOS 5 HEOS 3
w r y w r y DC18V
RESET 2.0A AUX IN
USB
5V/1A NETWORK CONNECT
q e t u q e t u w
q ry
etu
.
A Power Input (DC) F Connect Button (CONNECT)
Used to connect the external power supply (v p. 12). Used for Wi-Fi setup (v p. 42).
B Reset Button (RESET) G Connect in Status LED
Various settings are reset to the factory default values Indicates the status of this unit (v p. 42, 45).
(v p. 43). H Threaded Mounting Hole
C AUX Input (AUX IN) Used to mount this unit on a wall or ceiling.
Used to connect audio devices (v p. 18). I Safety Wiring Hole
D USB Input (USB 5V/1A) Used to prevent from dropping.
Used to connect USB storage devices.
E Network Connector (NETWORK)
Used to connect this unit to a wired Ethernet network (v p. 14).
10
Contents Setup Use Troubleshooting Status LED Appendix
11
Contents Setup Use Troubleshooting Status LED Appendix
DC18V USB
RESET 2.0A AUX IN 5V/1A NETWORK CONNECT
.
Getting the HEOS App
The HEOS app is the heart of the HEOS experience. Using your mobile device and the HEOS app, you can setup, browse, explore, and control your
HEOS system right in the palm of your hand, from anywhere in your home.
Download the HEOS app for iOS or Android by searching App StoreSM or Google Play store for HEOS by Denon.
.
12
Contents Setup Use Troubleshooting Status LED Appendix
2
If you have any problems connecting your HEOS device, jump to the
Make sure you have the included Troubleshooting section (v p. 41).
Audio/Setup cable handy.
13
Contents Setup Use Troubleshooting Status LED Appendix
0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended).
0 Do not connect a Network Connector directly to the LAN port/Ethernet connector on your computer.
1 Music
Music
2 Settings
Add Device
.
14
Contents Setup Use Troubleshooting Status LED Appendix
Selecting a Room/Speaker
Rooms
Drag one room into another to group them
If you have more than one HEOS speaker, you must tell the HEOS system Kitchen
Song Name 1
which speaker you want to control:
1
Living
Tap the Rooms tab. Song Name 2
.
15
Contents Setup Use Troubleshooting Status LED Appendix
2
station that appeals to your mood.
Select This iPhone/iPod/iPad/Phone.
NOTE
If you have a TuneIn account, you can sign into the TuneIn service under Settings -
3 Browse the local music on your phone and select
something to play.
Music Sources - TuneIn, and access all of your My Favorite TuneIn stations.
Audio signal
Audio signal
.
.
16
Contents Setup Use Troubleshooting Status LED Appendix
or NAS PC
(Network Attached
PC Storage)
.
17
Contents Setup Use Troubleshooting Status LED Appendix
.
NOTE
The analog output signals from some sources can be fairly strong. If the input level of
the source device is turned up high, it could overload the inputs of the HEOS device.
This is unlikely to cause damage, but can cause distorted sound. Initially, set the
volume of the source to a medium low level, then turn it up as needed. If you hear
distortion, turn down the device's volume control.
18
Contents Setup Use Troubleshooting Status LED Appendix
NOTE
0 It may take several minutes for the name of your HEOS system to appear in the
.
Local Music list if you have a large number of files on your USB device.
0 It is not possible to connect and use a computer via the USB port of this unit using
a USB cable.
19
Contents Setup Use Troubleshooting Status LED Appendix
20
Contents Setup Use Troubleshooting Status LED Appendix
geographical location, there are several options to choose from. For more
information about which services are available in your area please visit
2 Select the Settings a icon in the upper left corner of
the screen.
HEOSbyDenon.com
Once youve setup your HEOS account, you can add supported Music
Services to your HEOS system by tapping on the music service logo in
4 Select the name of the online Music Service you want
to edit.
the Music tab.
Follow the instructions on the screen to add your username and
password for the selected music service. You only have to enter your
5 Sign out, then sign in again to associate your
username and password with your HEOS account.
account information once as the HEOS account service will securely
remember your login information so you dont have to enter it each
time you want to play music from the music service.
6 Select Hide for Now to prevent the service logo from
appearing on the main Music menu.
Additional Music Services may be available under Settings - Music
Services.
21
Contents Setup Use Troubleshooting Status LED Appendix
22
Contents Setup Use Troubleshooting Status LED Appendix
Multiple Rooms
Drag one room into another to group them Drag one room into another to group them
Dining Dining
2
Song Name 2
Kitchen
amazing! Song Name 2
o Grouping Rooms
Bedroom
Song Name 3
.
music.
23
Contents Setup Use Troubleshooting Status LED Appendix
Dining Dining
2
Song Name 1 Song Name 1
NOTE
Living Kitchen
4
3
Song Name 4
You can not remove the first room that started playing the music before
grouping.
2
Bedroom
Kitchen Song Name 3
rooms.
.
24
Contents Setup Use Troubleshooting Status LED Appendix
2
Dining
3
Living
3
Kitchen
Quickly pinch your two fingers together and release. Song Name 3 Kitchen
4
Bedroom Bedroom
All of your rooms will be joined together and begin Song Name 4
Drag a room out of this group to ungroup it
.
25
Contents Setup Use Troubleshooting Status LED Appendix
1
Song Name 1 Song Name 1
2
Dining
Living
of rooms.
3
Kitchen
Song Name 3
4
3
Kitchen
Quickly spread your two fingers apart from each other Bedroom Bedroom
and release. Drag a room out of this group to ungroup it
Song Name 4
.
26
Contents Setup Use Troubleshooting Status LED Appendix
be saved as a persistent stereo pair where one speaker outputs the left
Song Name 2
Dining L
channel of audio and the other speaker outputs the right channel of audio.
Paired HEOS 3 speakers will then appear as a single Room (with two
Dining R
1
Kitchen Kitchen
Tap the Rooms tab.
Song Name 2
Song Name 2
2
Bedroom
Create a group containing ONLY two HEOS 3 speakers
Bedroom
Song Name 3 Song Name 3
3 Tap the Pencil e icon to enter Edit mode. 1 Rooms Music Now Playing
.
Group.
27
Contents Setup Use Troubleshooting Status LED Appendix
6
Drag one room into another to group them
Tap the Back arrow to return to the list of Rooms. Name Dining L + Dining R
5
Dining L + Dining R
7
Song Name 1
Stereo Pair
The group of two HEOS 3 speakers will now appear as a single Room. Balance Center
You can change the name of the stereo paired room at any time. Bedroom
Song Name 3
Swap L&R
For optimal sound quality, please change the Orientation setting of the HEOS 3
speaker to Vertical before turning on stereo pairing.
.
28
Contents Setup Use Troubleshooting Status LED Appendix
2 Tap the Pencil e icon to enter Edit mode. 2 Tap the Pencil e icon to enter Edit mode.
5 Select or enter a new name for your pair of speakers. 5 Adjust the Balance to the left or right.
6 Tap the Save i button to save your changes. 6 Tap the Check Mark i icon to exit Edit mode.
29
Contents Setup Use Troubleshooting Status LED Appendix
30
Contents Setup Use Troubleshooting Status LED Appendix
add it to the queue. When you select something to play you will be asked
how you want to queue up your music. 2 Tap the cover art to reveal the repeat b and shuffle c
controls.
o Play Now
Inserts the item into the queue after the currently playing track and
plays the selected item immediately.
o Play Next
Inserts the item into the queue after the current song and plays it when
the current song ends.
31
Contents Setup Use Troubleshooting Status LED Appendix
Rearranging the Now Playing Queue Deleting Songs from the Play Queue
Once you have songs lined up in your queue, you might want to rearrange You can remove songs one at a time from the Now Playing queue:
the order or remove some songs:
1 Tap the Now Playing tab.
1 Tap the Now Playing tab.
2 Tap the Queue d icon in the upper right corner of the
2 Tap the Queue d icon in the upper right corner of the screen.
screen.
3 Tap the Pencil e icon to enter Edit mode.
3 Tap the Pencil e icon to enter Edit mode.
4 Tap the track(s) that you want to delete.
4 Rearrange the order of your queue by dragging the list
f icon (on the right side of each track row) up or
down.
5 Tap the Delete g icon to delete all of the selected
tracks from the play queue.
32
Contents Setup Use Troubleshooting Status LED Appendix
2 Tap the Queue d icon in the upper right corner of the 1 Tap the Now Playing tab.
screen.
2 Tap the Queue d icon in the upper right corner of the
3 Tap the Delete g icon to confirm that you want to screen.
delete all songs from the queue.
3 Tap on the Save h icon.
4 Enter a name for your Playlist and tap the Save icon.
33
Contents Setup Use Troubleshooting Status LED Appendix
1
corner of the main Music menu to display the Settings
Select Network.
menu.
2 Select My Devices to display a list of your speakers. 2 A list of wireless networks that your speaker can
access is displayed.
Changing the Name of a Speaker 4 Wait as the speakers network connection is changed.
2 Select or enter a new name for your speaker. Ethernet network. To switch back to using a wireless network you must remove the
Ethernet cable from the back of the speaker.
34
Contents Setup Use Troubleshooting Status LED Appendix
1 Select Orientation. source quality and bit rate are maintained and there is no inherent delay.
1
horizontally. Select Status Light.
35
Contents Setup Use Troubleshooting Status LED Appendix
NOTE
o Network Settings
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on when
1 Select Advanced. accessing the My Devices/(My Devices)/Network screen in the HEOS app or
whenever the Connect button on the device is pressed.
36
Contents Setup Use Troubleshooting Status LED Appendix
5
b. Software
Select Save Settings to apply the new settings or
c. Device
Cancel Changes to revert to the previous settings.
37
Contents Setup Use Troubleshooting Status LED Appendix
38
Contents Setup Use Troubleshooting Status LED Appendix
ADVANCED FEATURES
There are a few advanced features of the HEOS system that you may want to explore once you become familiar with the basic operations. You can
access the advanced features of the HEOS system by following these steps:
1 Select the Settings a icon located in the upper left Submit Diagnostics
corner of the main Music menu to display the Settings If you are having trouble with your network or HEOS system, you may be
menu. asked by Denon technical support personnel to select this option. This
feature will automatically send Denon technical support diagnostic
2 Select Advanced Settings to display a list the
available settings.
information about your HEOS system.
NOTE
No personal information is sent and your information will never be shared with
anyone.
39
Contents Setup Use Troubleshooting Status LED Appendix
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
40
Contents Setup Use Troubleshooting Status LED Appendix
BASIC TROUBLESHOOTING
My speaker wont connect to my network using the audio cable
Solution Refer to Page
0 Make sure your mobile device is connected to your wireless network before setting up your speaker. 13
0 Alternatively, you can connect your speaker to your network router using the included Ethernet cable. Once connected via 14
Ethernet, the HEOS by Denon App should recognize the speaker and you can manually move it to your wireless network using
Settings/My Devices/Device_Name/Advanced/Network Settings.
41
Contents Setup Use Troubleshooting Status LED Appendix
42
Contents Setup Use Troubleshooting Status LED Appendix
43
Contents Setup Use Troubleshooting Status LED Appendix
Contact Denon
For U.S. & Canada only:
If you need further assistance with your HEOS product, please contact HEOS by Denon Customer Support Services below:
Website: www.HEOSbyDenon.com/Support
Email: Support@HEOSbyDenon.com
Live Chat: www.HEOSbyDenon.com/LiveChat
Telephone: Toll Free (855) 499 2820
(M-F 10:00AM to 10:00PM EST / Sat 12:00PM to 8:00PM EST)
44
Contents Setup Use Troubleshooting Status LED Appendix
.
.
(off) (off)
Plug in Booting
.
.
(blink) (off)
.
.
(solid) (off)
.
.
(solid) (solid)
.
.
(blink) (off)
45
Contents Setup Use Troubleshooting Status LED Appendix
Not connected
.
.
(solid) (solid)
.
.
(blink) (solid)
Setup
Cable connection is OK
.
.
(solid) (solid)
.
.
(blink) (off)
46
Contents Setup Use Troubleshooting Status LED Appendix
.
.
(solid) (off)
Error
.
.
(solid) (solid)
Updating
.
.
(blink) (blink)
Update Rebooting
.
.
(blink) (off)
.
.
(solid) (off)
47
Contents Setup Use Troubleshooting Status LED Appendix
.
.
(fast blink) (solid)
.
.
(blink) (solid)
Reset
Rebooting
.
.
(blink) (off)
Ready-Not Configured
.
.
(solid) (solid)
48
Contents Setup Use Troubleshooting Status LED Appendix
Firmware Error
.
.
(slow blink (NOT fade)) (off)
.
.
(fast blink) (off)
Network Error
.
.
(solid) (solid)
Volume Change
.
.
(quick blink) (off)
Mute
.
.
(slow blink) (off)
49
Contents Setup Use Troubleshooting Status LED Appendix
.
.
(fast blink) (solid)
.
.
(for 3 sec. solid) (solid)
WPS time-out
.
.
(for 3 sec. solid) (solid)
Network Standby
.
.
(dimmed solid) (off)
Power Management
Deep Standby
.
.
(off) (off)
50
Contents Setup Use Troubleshooting Status LED Appendix
NOTE
Files protected by DRM such as Apples Fairplay DRM, are not supported.
51
Contents Setup Use Troubleshooting Status LED Appendix
SPECIFICATIONS
Speaker Specifications
o HEOS 7
Wireless LAN
Network type: Conforming to IEEE 802.11a/b/g/n
Used frequency range: 2.4 GHz, 5 GHz
General
Operating temperature: 41 F - 95 F (5 C - 35 C)
Power supply: AC 100 240 V, 50/60 Hz
Power consumption: 32 W
Power consumption in network standby mode: 4W
Power consumption in deep standby mode: 0.45 W
Max Analog Input: 1 Vrms
Dimensions
Unit : in. (mm)
7 63/64 (203)
18 55/64 (479) 6 29/64 (164)
.
Weight : 9 lbs 14.7 oz (4.5 kg)
For the purpose of improvement, the specifications and design are subject to change without notice.
52
Contents Setup Use Troubleshooting Status LED Appendix
o HEOS 5
Wireless LAN
Network type: Conforming to IEEE 802.11a/b/g/n
Used frequency range: 2.4 GHz, 5 GHz
General
Operating temperature: 41 F - 95 F (5 C - 35 C)
Power supply: AC 100 240 V, 50/60 Hz
Power consumption: 23 W
Power consumption in network standby mode: 4W
Power consumption in deep standby mode: 0.3 W
Max Analog Input: 1 Vrms
Dimensions
Unit : in. (mm)
8 15/64 (209)
11 37/64 (294) 6 17/32 (166)
.
Weight : 6 lbs 9.8 oz (3.0 kg)
For the purpose of improvement, the specifications and design are subject to change without notice.
53
Contents Setup Use Troubleshooting Status LED Appendix
o HEOS 3
Wireless LAN
Network type: Conforming to IEEE 802.11a/b/g/n
Used frequency range: 2.4 GHz, 5 GHz
General
Operating temperature: 41 F - 95 F (5 C - 35 C)
Power supply: AC 100 240 V, 50/60 Hz
Power consumption: 22 W
Power consumption in network standby mode: 4W
Power consumption in deep standby mode: 0.3 W
Max Analog Input: 1 Vrms
Dimensions
Unit : in. (mm)
6 9/64 (156)
5 5/8 (143)
10 23/32 (272)
5 3/64 (128)
54
Contents Setup Use Troubleshooting Status LED Appendix
INFORMATION
Trademarks
.
.
Google Play is a trademark of Google Inc.
Wi-Fi Protected Setup logo is trademark of Wi-Fi Alliance.
.
Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries. App Store is a
.
Adobe, the Adobe logo and Reader are either registered trademarks or
service mark of Apple Inc.
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
55
Contents Setup Use Troubleshooting Status LED Appendix
License
o License Information for the Software Used in n LGPL
the Unit Open Source Used Version
About GPL (GNU-General Public License), LGPL (GNU Lesser ffmpeg 0.8.3
General Public License) License
glibc 2.9
This product uses GPL/LGPL software and software made by other
libmms 0.6.2
companies.
After you purchase this product, you may procure, modify or distribute
n curl-7.24.0
the source code of the GPL/LGPL software that is used in the product.
Denon provides the source code based on the GPL and LPGL COPYRIGHT AND PERMISSION NOTICE
licenses at the actual cost upon your request to our customer service Copyright (c) 1996 - 2014, Daniel Stenberg, <daniel@haxx.se>.
center. However, note that we make no guarantees concerning the All rights reserved.
source code. Please also understand that we do not offer support for
Permission to use, copy, modify, and distribute this software for any
the contents of the source code.
purpose with or without fee is hereby granted, provided that the above
This section describes software license used for this unit. To copyright notice and this permission notice appear in all copies.
maintain the correct content, the original (English) is used.
THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF
n GPL ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
Open Source Used Version PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
bridge-utils 2.8 PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
busybox 1.21.1
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
ebtables 2.0.10-4 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
Linux kernel 2.6.30 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
mtd-utils 1.4.3 DEALINGS IN THE SOFTWARE.
ntfs-3g_ntfsprogs 2011.4.12 Except as contained in this notice, the name of a copyright holder shall
ntpclient 2007 not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization of the
u-boot 2011.06
copyright holder.
wireless-tools version 29
56
Contents Setup Use Troubleshooting Status LED Appendix
n e2fsprogs-libs-1.40.8/lib/uuid n expat-2.0.1
Redistribution and use in source and binary forms, with or without Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
modification, are permitted provided that the following conditions are and Clark Cooper
met: Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
1. Redistributions of source code must retain the above copyright Permission is hereby granted, free of charge, to any person obtaining a
notice, and the entire permission notice in its entirety, including the copy of this software and associated documentation files (the
disclaimer of warranties. Software), to deal in the Software without restriction, including
2. Redistributions in binary form must reproduce the above copyright without limitation the rights to use, copy, modify, merge, publish,
notice, this list of conditions and the following disclaimer in the distribute, sublicense, and/or sell copies of the Software, and to permit
documentation and/or other materials provided with the distribution. persons to whom the Software is furnished to do so, subject to the
3. The name of the author may not be used to endorse or promote following conditions:
products derived from this software without specific prior written
The above copyright notice and this permission notice shall be
permission.
included in all copies or substantial portions of the Software.
THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE HEREBY PARTICULAR PURPOSE AND NONINFRINGEMENT.
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS ARISING FROM, OUT OF OR IN CONNECTION WITH THE
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, SOFTWARE.
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF NOT
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57
Contents Setup Use Troubleshooting Status LED Appendix
n getopt n jQuery
http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright 2014 jQuery Foundation and other contributors
Copyright (c) 1987, 1993, 1994 The Regents of the University of http://jquery.com/
California. All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a
Redistribution and use in source and binary forms, with or without copy of this software and associated documentation files (the
modification, are permitted provided that the following conditions are Software), to deal in the Software without restriction, including
met: without limitation the rights to use, copy, modify, merge, publish,
1. Redistributions of source code must retain the above copyright distribute, sublicense, and/or sell copies of the Software, and to permit
notice, this list of conditions and the following disclaimer. persons to whom the Software is furnished to do so, subject to the
2. Redistributions in binary form must reproduce the above copyright following conditions:
notice, this list of conditions and the following disclaimer in the The above copyright notice and this permission notice shall be
documentation and/or other materials provided with the distribution. included in all copies or substantial portions of the Software.
3. Neither the name of the University nor the names of its contributors THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF
may be used to endorse or promote products derived from this ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
software without specific prior written permission. TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OR OTHER DEALINGS IN THE SOFTWARE.
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
58
Contents Setup Use Troubleshooting Status LED Appendix
n libpcap-1.4.0 n libtar-1.2.11
License: BSD Copyright (c) 1998-2003 University of Illinois Board of Trustees
Redistribution and use in source and binary forms, with or without Copyright (c) 1998-2003 Mark D. Roth
modification, are permitted provided that the following conditions are All rights reserved.
met: Developed by: Campus Information Technologies and Educational
1. Redistributions of source code must retain the above copyright Services, University of Illinois at Urbana-Champaign
notice, this list of conditions and the following disclaimer. Permission is hereby granted, free of charge, to any person obtaining a
2. Redistributions in binary form must reproduce the above copyright copy of this software and associated documentation files (the Software),
notice, this list of conditions and the following disclaimer in the to deal with the Software without restriction, including without limitation
documentation and/or other materials provided with the distribution. the rights to use, copy, modify, merge, publish, distribute, sublicense,
3. The names of the authors may not be used to endorse or promote and/or sell copies of the Software, and to permit persons to whom the
products derived from this software without specific prior written Software is furnished to do so, subject to the following conditions:
permission. z Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimers.
THIS SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY
z Redistributions in binary form must reproduce the above copyright
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY notice, this list of conditions and the following disclaimers in the
AND FITNESS FOR A PARTICULAR PURPOSE. documentation and/or other materials provided with the distribution.
z Neither the names of Campus Information Technologies and
Educational Services, University of Illinois at Urbana-Champaign,
nor the names of its contributors may be used to endorse or promote
products derived from this Software without specific prior written
permission.
THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE CONTRIBUTORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS WITH THE
SOFTWARE.
59
Contents Setup Use Troubleshooting Status LED Appendix
60
Contents Setup Use Troubleshooting Status LED Appendix
61
Contents Setup Use Troubleshooting Status LED Appendix
n portmap-6.0 n pstdint.h-0.1.12
Copyright (c) 1990 The Regents of the University of California. z BSD License:
z All rights reserved. z Copyright (c) 2005-2011 Paul Hsieh
z Redistribution and use in source and binary forms, with or without z All rights reserved.
modification, are permitted provided that the following conditions are met: z Redistribution and use in source and binary forms, with or without
1. Redistributions of source code must retain the above copyright modification, are permitted provided that the following conditions are
notice, this list of conditions and the following disclaimer. met:
2. Redistributions in binary form must reproduce the above copyright 1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer in the notice, this list of conditions and the following disclaimer.
documentation and/or other materials provided with the distribution. 2. Redistributions in binary form must reproduce the above copyright
3. A ll advertising materials mentioning features or use of this software notice, this list of conditions and the following disclaimer in the
must display the following acknowledgement: documentation and/or other materials provided with the distribution.
This product includes software developed by the University of 3. The name of the author may not be used to endorse or promote
California, Berkeley and its contributors. products derived from this software without specific prior written
4. Neither the name of the University nor the names of its contributors permission.
may be used to endorse or promote products derived from this
software without specific prior written permission. z THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
z THIS SOFTWARE IS PROVIDED BY THE REGENTS AND NOT LIMITED TO, THE IMPLIED WARRANTIES OF
CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED MERCHANTABILITY AND FITNESS FOR A PARTICULAR
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED PURPOSE ARE DISCLAIMED.
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A z IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
62
Contents Setup Use Troubleshooting Status LED Appendix
63
Contents Setup Use Troubleshooting Status LED Appendix
64
Contents Setup Use Troubleshooting Status LED Appendix
n Tremor n zlib
http://wiki.xiph.org/index.php/Tremor http://www.zlib.net/
Copyright (c) 2002, Xiph.org Foundation zlib.h -- interface of the zlib general purpose compression library
Redistribution and use in source and binary forms, with or without version 1.2.3, July 18th, 2005
modification, are permitted provided that the following conditions are Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
met: This software is provided as-is, without any express or implied
1. Redistributions of source code must retain the above copyright warranty. In no event will the authors be held liable for any damages
notice, this list of conditions and the following disclaimer. arising from the use of this software.
2. Redistributions in binary form must reproduce the above copyright Permission is granted to anyone to use this software for any purpose,
notice, this list of conditions and the following disclaimer in the including commercial applications, and to alter it and redistribute it
documentation and/or other materials provided with the distribution. freely, subject to the following restrictions:
3. Neither the name of the Xiph.org Foundation nor the names of its 1. The origin of this software must not be misrepresented; you must
contributors may be used to endorse or promote products derived not claim that you wrote the original software. If you use this
from this software without specific prior written permission. software in a product, an acknowledgment in the product
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS documentation would be appreciated but is not required.
AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED 2. Altered source versions must be plainly marked as such, and must
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED not be misrepresented as being the original software.
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 3. This notice may not be removed or altered from any source
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL distribution.
THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY Jean-loup Gailly jloup@gzip.org, Mark Adler
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR madler@alumni.caltech.edu
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
65
D&M Holdings Inc.
www.denon.com 3520 10321 20ADA
66