Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Model: JAN-701B/901B/2000
JAN-701/901M
1. ECDIS system configuration
and initial operation
1.1 How to Power On/ Off the JRC ECDIS
Power ON
Press the [POWER] key on the operation panel
Power OFF
Press the [POWER] key on the operation panel
Caution:
Do not keep pressing the [POWER] key
because the forced OS termination
would be performed.
Application software
JRC ECDIS software:
The application software operating on Windows XP
Embedded was designed by JRC
1. ECDIS system configuration
and initial operation
1.3 Configuration of the disk drive
Normally work
with dual drives (D & E)
1. ECDIS system configuration
and initial operation
1.6 The time for replacement of consumables
Periodic replacement
Hard disk: 2 years
UPS battery: 3 years (UPS: Uninterruptible Power Supply)
LCD backlight: 5 years
RESOLUTION MSC.232(82)
ECDIS should be connected to the ships position fixing system,
to the gyro compass and to the speed and distance measuring device.
1. ECDIS system configuration
and initial operation
1.9 How to shift ENC displayed on JRC ECDIS
Wide space
in the COG
direction
Hand cursor
Shifting the chart by entering the position
from entry panel
Select [MENU] - [(2)Off Center] - [(2)Enter Position]
Enter Position
Enter latitude and longitude
Shifting the chart with cross cursor
True Motion: Left-click at the designating position
Main Menu:
(1)AIS/TT, (2)Route, (3)Auto Sail, (4)Ownship/Track, (5)User Map,
(6)Chart, (7)Main, (0)Exit
2. Operation menu on the JRC ECDIS
2.2 How to select menu
Selecting menu
Select menu from menu lists on the menu title bar
3. Information of ENC
3.1 The difference between ENC/C-MAP/ARCS
information and The other information
ENC/C-MAP/ARCS information
Information belonging to the charts
Chart legend Name, Edition no., Issue date, Navigation purpose, etc.
Object information Depth area, Land area, Obstruction, Land mark, Light, etc.
Update history Edition no., Update date, Accept status, Issue date, etc.
AIO view
[Menu]
-[(6)Chart]
-[(4) View AIO]
AIO information
Click Show
Displaying information added on the electronic charts
with Other Information function
1) Right-click on the chart
User Map
2) Select [Other Information]
3) Rotate the trackball, point the cursor
to the object, and left-click the cursor
Event Mark
Information Mark
Example:
Event Mark information
4. Information and functions provided
in the Display panel
Navigation Sensor Information
Heading Source
Gyro I/F, Gyro(NMEA)
STW Source
LAN: Gyro I/F or NMEA LOG
Local port: Gyro I/F
POSN1 & POSN2 setting
CCRP
Setting
only for
Serviceman
Offset
The panel changes to sky blue
Depth:
Water depth and the standard position
Route:
Route name being selected
UNLOAD appears if nothing is selected
To WPT:
Next waypoint being selected
Drop-dawn list shows selectable
waypoints
DIST:
Distance from the ship to the To WPT
BRG:
Bearing from the ship to the To WPT
Average speed calculation for aim arrival time
CALC: (Input ETA to calculation Average Speed)
SPD: Displays average speed to arrive
at the destined waypoint
Event Mark
Isolated with
Other Information
Information menu
MOB (Man Over Board)
When left-clicked, MOB (Man-Over-Board)
panel opens
MOB point symbol
Own ship symbol MOB panel
Zoomed in
Zoomed out
Layers
[-]: Displays the objects in [Base],
[Standard] and [Other] categories
[S]: Display the objects in [Standard]
and [Other] categories
[O]: Display the objects only in [Other]
category
Selecting the motion mode
Own Ship
Own Ship Own Ship
Own Ship
Heading Course
Specified degree
North is upside is upside
To WPT is upside is upside
Box shows D
Dropped EBL/VRM mode
No Alarm
Occur
Not acknowledged Alarm
Audible alarm and Visible alarm
Icon in green:
No alarm
5. Route planning
5.1 How to set up of design parameters
Display ETA:
Displays ETA at Final WPT
Limited GC leg to
maximum latitude
Route Type:
Select a route type when creating a route file
Normal: Normal route
TCS: TCS (Track Control System)
5. Route planning
5.2 How to design a route with table editing
Save: Save the created Insert: Insert new WPT between WPTs
or edited route Delete: Delete WPT
[WPT to WPT] CRS: Course to the next WPT
DIST: Distance to the next WPT
TTG: Estimated time required from
waypoint to waypoint [Total]
Safety Check:
Check the safety of the route
Warning dialog box will appear if not safety
Limit Check:
Check the limit of the route (Only for TCS)
Warning dialog box will appear when exceeding the demarcation of the sailing feature
Shown in red
Can be edited on PC
Importing the file of the route
In the Table editor or Graphic editor mode, open the route file for exporting
Select [MENU] - [(1)File]-[(3)Import]-[(1)Normal] or [(2)TCS]
Shallow Contour
Safety Depth
(Spot sounding)
Safety Contour
(Emphasized contour)
Isolated danger
-obstruction
-water rock
-wreck
Shown in symbol
Vector:
Set up the danger detection vector
detects safety contour
and danger areas
(Line/AREA info.)
Sector:
Set up the danger detection sector
detects danger objects
(Spot info.)
Vector detection
Sector detection
6. Route monitoring
6.2 How to operate the route monitoring
Acquired
(in RADAR)
[AIS Target]
Sleeping
Activated
Activated
Selected
Dangerous
(blink)
Activation and inactivating AIS targets
Activate AIS target
1) Right-click on the chart display area
2) Click the Activate AIS on the context menu
3) Move the cursor on the TT/AIS target and click
ROTFIX length)
HDGFIX length)
AIS Detail
When left-click the [AIS Detail],
the AIS Information panel
will open
Setting target filter and CPA/TCPA
Select [MENU] - [(1)AIS/TT]-[(0)AlS/TT Setting]
CPA/TCPA Limit
CPA (Closest Point of Approach):
Distance between own ship and target
TCPA (Time to Closest Point of Approach):
Time to own ship and CPA of target
AIS Filter
Ring:
Display within Heading line
the specified distance Sector area
Ring area
Sector:
Display within
Filter mode: Ring 20NM
the specified bearing
Own ship
Display AIS targets with the heading as
located less than 20 miles the center
Note: Maximum 300 targets
7. Setting up of ECDIS
7.2 How to set up of displaying RADAR echo
Symbol Outline
Track period:
1,2,4,6,8,12,16,24 hour
Note: Please dont forget to set Alarm Limit Setting because this danger
detection setting on the panel is only effective for Display ON/OFF
7. Setting up of ECDIS
7.4 How to set up of display ENC
Area Boundary
Plane Symbolized
Chart Symbol
Text Size
Large: Expand characters
Small: Reduced characters
Small Large
7. Setting up of ECDIS
7.5 How to set up of anchor watch function
Anchor watch alarm
Any part of hull go out
Monitoring dragging anchor the anchor monitoring circle
Select [MENU] - [(4)Ownship/Track]-[(2)Anchor Watch]
-[(1)Create Monitoring Circle]
Monitoring Circle
Default center position : Ship bow
possible to offset by cursor
Drawing No go line
Select [MENU] - [(5)User Map]-[(3)User Map Editor]
1) Left-click the New button
2) Select Line tab
Select
Warning Line
e
o lin
g
No Vector alarm limit detects No go line
Drawing No go area
Select [MENU] - [(5)User Map]-[(3)User Map Editor]
1) Left-click the New button
2) Select Area tab
Select
Warning Area
a
a re
go
No
Vector alarm limit detects No go area
Drawing entering text
Select [MENU] - [(5)User Map]-[(3)User Map Editor]
1) Left-click the New button
2) Select Text tab
Select
Small font
or
Large font
t
r Tex
te
En
Merging multiple user maps
In the User map menu
Select [MENU] - [(1)File]-[(7)Merge]
Making user map 1 Making user map 2 Merging user map 1 & user map2
Note:
Please dont use this function without constraint
7. Setting up of ECDIS
7.8 How to set up of detecting danger situation
Area:
Select the areas that are detected
as danger area
7. Setting up of ECDIS
7.9 How to set up of Navigation logging function
Logging:
Select trigger to record log data
View:
Select for displaying the log
on the Logbook
System Alarm:
Ex. POSN1(Data), POSN1 shifted,
AC offline
Operation Miss:
Ex. No Object, Not Allowed
Key ACK:
Pushing [ALARM ACK] key
Setting Alarm:
Ex. Safety contour not set,
Safety depth not set
Navigation Alarm-High, Mid, Low:
Ex. Call-back navigator, Crossing
Safety Contour, CPA/TCPA
Refer to INSTRUCTION MANUAL
9.1 Alarm Function
8. Chart installation and updating
8.1 How to install ENC
Select SA Certificate
Select SA Certificate
OK:
All update contents are automatically accepted
Cancel:
All update contents are NOT accepted
Should be accepted the updates by the user
from Navigation & Planning
Not yet Accepted by the user
UpNo.:
Edition
Update Number
Last Update:
Last Update date
Confirming by Navigation & Planning
1)Select [Main]-[Chart]-[Select S-57 Chart]
2)Right-click on the chart
3)Select [S-57/C-MAP/ARCS Information]
4)Rotate the trackball, point the cursor to the object,
and left-click the cursor
Update History:
Update number (Edition)
Update date
Issued date
Confirming Expiry date
Select [Sort]-[S-63(Offline)]
Double-click the [S-63] System Chart
Expiry:
Expiry date
of the Cell Permit
Cell permit has expired
ECC
ACC
TCS Category-C
ECC
ACC
9. Track control system (Automatic sailing)
9.2 What required before starting TCS
End
9. Track control system (Automatic sailing)
9.3 How to operate TCS
-Category-C
Starts turning automatically after reaches at the WOP
(WOP: Wheel Over Point)
Stopping Automatic sailing
Select [MENU] - [(3)Auto Sail]-[(2)Stop]
Maintenance No. :
Main software version of the ECDIS
File Manager
Select [MENU] - [(7) Main]-[(2)File Manager]
Ship LAN : Master ECDIS and Backup ECDIS are connected through the LAN
12. Operation of former ECDIS
12.1 Difference point of operation
between former ECDIS and current ECDIS
Operation panel
AUTO SAILING :
[GUARD], [AUTO], [TURN], [SET CO.]
Display panel
[Previous ECDIS (M-type)] [Latest ECDIS (B-type)]
Menu and function